Thanks! Worked like a charm. I used a Qtip swab, it didn't look dirty but I cleaned it anyway. Also, I had to change the fuel filter. The engine would sputter and wanted to shut off when gas was applied. I guess this is what happens when you let the bike sit up for 6 months. 😀 Thanks again!
I see a leak from the tank … onto the carburetor…do u think it’s the tank itself or should I work on the carburetor… I’m not a mechanic don’t want to touch the carb if I don’t have to
thanks so much, had spitting and spittering on my 1990 xr250, bought a rebuild kit, come to find out there was a little piece of rubber in where the float valve sits. took it out runs mint and doesnt leak.
Great Video! Well done! You have a very special gift of explaining the process so anybody that's handy can understand! You need to start up your own small engine repair business!😊
I need to change my carburetor tray. If I remove the carburetor, not moving the adjustment screws will it throw the carburetor out of control.thks four your video 😊
Karting Kid : AWESOME VIDEOING SKILLS . CLOSE UP ZOOM . GREAT CLEAR VOICE , WHAT CAMERA TOU USING HERE ? CONTINUE ON YOUR KNOWLEDGE YOUNG MAN , BEST BLESSINGS .
I got a problem I’m getting gas to the engine compression and barely spark enough to hear but not enough to see every time it strikes so when I try to start it has to be at the perfect throttle and runs a couple strokes before it stops
Do you think that this video would help for a generator carburetor cuz that's your video popped up when I googled for the Makita generator carburetor. I'm trying to fix that now
im going to look at this minibike i have again tomorrow im thinking something like this is the problem its leaking out of the overflow at the bottom and the bottom is closed but gas is continually leaking out so maybe a bad float or float pin..its not my bike id probably just buy a whole new carberator theyre only 30 bucks and this one is in rough shape and so is the filter but im trying to fix it just for kicks...not even sure this guy will eve ruse it again so i dont want to waste money on soemthing he wont even use..also appears like it needs a back tire too so a carb would be a waste.
Dude I don't know what the hell to do, I cleaned my carb a couple times and it runs great fora couple hours then out of nowhere it starts leaking out the intake again. I adjusted the float and everything. Since I've been cleaning it now it only drips a little fuel compared to it pouring out. I took it apart I'll deal with it tomorrow
The “punch mark” of mine is a little male piece coming out the side looks like the idle screw comes in one side and out the other, SEEMS , that little male part leaks out of its diameter
Dog I'm watching this today you made this years ago this is helping me I'm on the side of the interstate stuck
Thanks! Worked like a charm. I used a Qtip swab, it didn't look dirty but I cleaned it anyway. Also, I had to change the fuel filter. The engine would sputter and wanted to shut off when gas was applied. I guess this is what happens when you let the bike sit up for 6 months. 😀 Thanks again!
I see a leak from the tank … onto the carburetor…do u think it’s the tank itself or should I work on the carburetor… I’m not a mechanic don’t want to touch the carb if I don’t have to
This really helped fixed in less than 30 minutes wow thank you
Excellent video , i learned alot from this one , ive been looking for days for a video like this one. Thank you
This was so good the best vid on how to fix things and how to vids thx fixed my problem make more I subbed
thanks so much, had spitting and spittering on my 1990 xr250, bought a rebuild kit, come to find out there was a little piece of rubber in where the float valve sits. took it out runs mint and doesnt leak.
Great Video! Well done! You have a very special gift of explaining the process so anybody that's handy can understand! You need to start up your own small engine repair business!😊
First time working on my carb turned out successfully thanks yo you!
Awe!!! Ur so cuuuuuuute!!! Good job kid!!! If we lived closer I'd pay you to fix my car.
Thanks dude! I was like wtf. I cleaned the carb all the time and this time fuel started dumping out. It drove me nuts.
Best carb video there is. Thanks for the wisdom 🙏
Good video you are a good kid. Keep doing your projects.
I need to change my carburetor tray. If I remove the carburetor, not moving the adjustment screws will it throw the carburetor out of control.thks four your video 😊
My. Bayou just shits itself when I even fill the tank half way I usually tap the carb with a hammer and it fixes it for a while
Amazing video man! I haven't even fixed my bike yet, I'm just impressed with you're recording skills!
I just took apart my carb and put it back together but now the bike wont kickstart anymore. All it does is sputter
Karting Kid : AWESOME VIDEOING SKILLS . CLOSE UP ZOOM . GREAT CLEAR VOICE , WHAT CAMERA TOU USING HERE ? CONTINUE ON YOUR KNOWLEDGE YOUNG MAN , BEST BLESSINGS .
I got a problem I’m getting gas to the engine compression and barely spark enough to hear but not enough to see every time it strikes so when I try to start it has to be at the perfect throttle and runs a couple strokes before it stops
Great to see a young guy able to get his hands dirty. Better than sitting in front of a computer screen.
Meanwhile I’m sitting at the computer screen trying to figure out how to not sit at the computer screen 😂
I have seen people over 50 piss themselves playing slot machines.
Really good close up video. He did a good job.
Ihave an 125cc gy6 quad my carb is leaking fuel and its bogging when i give full throttel then it wants to die wht should i do
Why does my quad loose power when I drive it I was riding it and I gave it full throttle and it cut off?
Excellent ! Great Vid ! definetly helped me with my Vintage Vespa ! Lov lov
Do you think that this video would help for a generator carburetor cuz that's your video popped up when I googled for the Makita generator carburetor. I'm trying to fix that now
Yes it's the same basic design. Float valves on almost every carb use the same design
Pro tip use starter fluid for this. Burnt off carb cleaner especially if chlorinated is poisonous when burnt
I got a new carb but it's not leaking fast and its just when I turn it over
I have a problem i have exectli carb but it give to mac fule in to mix and i can't fix it Helh!
subbed man good video
im going to look at this minibike i have again tomorrow im thinking something like this is the problem its leaking out of the overflow at the bottom and the bottom is closed but gas is continually leaking out so maybe a bad float or float pin..its not my bike id probably just buy a whole new carberator theyre only 30 bucks and this one is in rough shape and so is the filter but im trying to fix it just for kicks...not even sure this guy will eve ruse it again so i dont want to waste money on soemthing he wont even use..also appears like it needs a back tire too so a carb would be a waste.
Great video bro
Mine is brand new, just installed and leaking out the intake 😢
Dude I don't know what the hell to do, I cleaned my carb a couple times and it runs great fora couple hours then out of nowhere it starts leaking out the intake again. I adjusted the float and everything. Since I've been cleaning it now it only drips a little fuel compared to it pouring out. I took it apart I'll deal with it tomorrow
Great video and right to the point thanks
Thank you this was so helpful omg
My leak is coming out from the immediate other side of the idle screw the little male golden bolt looking thing , what do I do
The “punch mark” of mine is a little male piece coming out the side looks like the idle screw comes in one side and out the other, SEEMS , that little male part leaks out of its diameter
Great video! Not a lot of talking! Awesome!
Great idea dude, thanks for ideas
Dope great shit. I want to also start posting go kart videos. I ordered a brand new 110cc for my go kart. I follow ur IG too
My mobile data is so slow but my engine won't stop leaking 😭 I can't even watch the vid
What state you located in?
AZ
@Lucas Truesdale bouta b I meet all the requirements
@Lucas Truesdale exactly bro i got both
Best video by far, SUB..
Awesome explanation and clear video
Thanks dude, really helped :)
Thanks for the video!! Mine works great!!
Awesome video!
Why do u need to drain the tank ? Just turn off the gas tap ! ❤️👀
Good job,boy!
Thanks!
Why empty the tank?
No shut off valve
great video dirty hands clean money
What if your carb is new and this is happening 😅
take it apart and put it back together. If it still doeant work send her back
Thanks fam!
np g ur username is fire
Thanks you helped a lot
very informative , thank you 😁
W hair big bro
Nice video thank you
Thank you so much!
A+
Worked until I turned off the bike and all of the gas came right back pur
All you need is a match and roll it into the street lol
need more help kaet kid plz hit me asap
Whatcha need
HUNYA !
You are like Chris fix the youtuber machanic