I am the proud owner of a Templar X some caveats: licensing make sure that when you get your MCO that it says motorcycle not off-road dirtbike this has been a constant struggle to get mine licensed. Insurance they would only do liability on the Chinese motorcycle. Nibbi carburetor put this on before you even start the motor cycle buy good American made stainless steel hose clamps and fuel line put your fuel line on the carburetor before you ever attempt to mount it it will save you a ton of time because the space is tight. Nibi makes an ignition I would swap out the original and use a NGK iridium spark plug chances are you’ll never ever have to change it. If you plan on changing your sprocket once again do this before you even start the bike I would recommend a high-quality chain with a rivet master link. As stated in the video Loctite Loctite Loctite. Drain the oil high-quality synthetic. Take your time break in the motorcycle engine slowly. Remember your tempering the steel. Just some suggestions.
@@Beckswelll when you purchase it make sure that you tell them to type in motorcycle. I had to re-contact and they re-issued one that said motorcycle. The one thing you need to worry about is the EPA rating. My state would not license my motorcycle because the EPA said for off-road use which means it has a spark arrestor in the muffler. It’s not gonna make any more CO2 on the road or off road that’s how stupid these people are. Good luck!
@@Beckswelll have whoever you buy it from type motorcycle on your MCO not off-road vehicle. You also need to make sure that your state will license it mine would not because the EPA sticker approved for off road which only means that it has a spark arrestor there’s no difference in the CO2 or the emissions. But that’s how stupid it gets. Remember you’re dealing with government
Yea I was planning on doing the 28 since it would be a direct swap without having to upgrade the intake manifold. My goal is just better jetting and an open intake. With a cone filter.
Great video. Trying to decide which bike is best for me. What's 6 ft 1 250 lb going to be like on this bike? Also I'm in Kentucky I think they come from California? Thanks in advance.
@@harrycash8713 you should be good! These bikes are fairly tall and can be adjusted a little bit as well. However I think the seat may be slightly uncomfortable but that’s just me.
Honestly I don't remember, I found mine by looking up team graphics. I want to say yours was 2015 but i don't remember model. I will look them up tonight and send you the link where I buy mine.@@darkowlmoto
How do those steel rims hokd up? I have two Roketa quads from the early 2000's, both still run with little to no issues each year. Like the rest of us, grew up riding Japanese bikes and love them still, but seriously looking at this or one like it for dual sport, trails in Boise, ID. That price is hard to beat.
Im holding off of the changes. Im re jetting the stock carb. I can change it later if im dissatisfied. Ill deal with chains and sprocket later. What i want to see is a catalytic converter removal video. Cant find one
I don’t believe these bikes have a catalytic converter. The large portion of the exhaust on the side is a baffled chamber to help with toning down or dampening the sound. Only emissions like system is the charcoal canister evap style system on these. Which isn’t much.
Hey, got a question for ya. I bought my Titan 250 DLX just a little bit ago and I'm curious to know if your Titan had issues with the throttle. I'm getting it fixed here soon with the help of my buddies but I'd just like to know how yours was out of the box. Mine currently will hit the full throttle at just half way. If I fully engage the throttle, it kills the bike.
@@hazeyknight4206 mine was totally fine. I will say a pinch in the throttle cable(s) can cause this. I would just adjust the throttle cable(s) and possibly re route them. I’ve seen sometimes the turning of the handle bars pinches the cables and can be an issue even a simple fix as adjusting the grip so it doesn’t stick. Can also check the screw on the clear cover of your throttle over tightening can cause it to stick also or cause throttle issues
@@darkowlmoto hey, late update but my buddy's father worked on the bike and fixed it. There were actually a couple things off about it but he got it fixed. Runs pretty good.
I have an X-Pro Storm 150. I'm wanting to change wheel size form 19/16 to 21/18. Any ideas of where to get wheels? You mentioned going to a different size front.
That I cannot answer. I'm from Illinois so I'm unsure. Your best bet would to check with your local dmv and local laws on bikes that are off road motorcycles and if they can be legally plated.
Is there a difference between the x-pro titan and x-pro titan DLX. I only see the titan in this color on Amazon but I want all the blinkers and mirrors like you have.
I’ve never had problems using them. Some people give them shit reviews because of stupid reasons. Or because of the shippers and how they handle the bikes.
Ive had an Apollo rfz 125cc great engine and durable frame! Had an Apollo DB36 good engine but shit frame and hard to work on. Also had a pitster pro lxr 250f which was pretty dope but the chinese fuel injection system didnt work all that great so stick with a carb if you can. Currently thinking of swooping one of these x pro's up soon.
It's riding season and getting warmer in the cooler wetter states so they are being bought up fast. You may just have to patiently wait. There are other alternatives out there that are just as good if not a little better! Just search online! Street legal dirt bikes and go from there. Hope this helps!
i contacted sales and they told me it'll be 2 months for another shipment of containers. The best thing you can do is to get notifications of their site on amazon when they get them in stock. I'm ordering three.
@@MrMattiezaya2 yup so most sprockets you wont need to look up by brand. Youll want to look up by size. So youll first want to look up how many teeth. And the pitch. 520 is your chain size/pitch on the sprocket. So look up 12T front sprocket 520 pitch.
@@MrMattiezaya2 no problem at all! Just make sure you know exactly how many teeth to get per what youre lookong for. More torque or a little more top end
Yep same experience. Ordered from powersports which is located in cali and have received both my titan and my qaud raptor clone within a week here in AZ. Pro tip: when ordering from powersports max just use the toll free phone number to order (you’ll talk to an actual person) their account creator is junk, but keep in mind you won’t be able to track your order and the only reach out is an emailed order confirmation. I ordered in November of 2023 and received a 2022 titan and the quad I ordered at the beginning of 2024 was a 2023. Both vehicles have exceeded my expectations. Buy now before they realize they are undervalued by at least $500-1000. 2 more things I’ve noticed on powersports at least, stock is running low as the titan DLX model(street legal) is no longer listed but the “dirt” version is, which means the newer model years will probably be restocked. The other thing is X-pro is remarkably in tune with its customer base as every new model year seems to improve in design and components from the previous model’s shortcomings, which is awesome but I fear price creep will be inevitable.
When did you ordered this? Mine is set to deliver next week I just ordered it. Just wondering if I will get the 2023 model. And post more videos of it lol
Yeah in their website the picture of the Titan DLX is outdated.. the one in this video looks more like a Templar, so I wonder what's going on, if we order this week what are they gonna send us? I tried to order one and the page is not working for the CC payment 😢
@@rudyshoplopez7366 mine came as a 2023 but looks like the older model, don’t have the led turn signals and the new decals and exhaust etc. I ordered a red one. Mine show was built in 08/2023
Hey Dark! First of all, nice video!!! Really nice to see a trustworthy review of a Chinese bike from someone that really uses it and not just someone paid by the big 4s to say they are crap. Question for you, I am new to motorcycles, and I am looking to buy one of those Titans. Unfortunately, here in Toronto is really hard to find information on these bikes, do you have any idea how I can get one here? Thanks man!
Definitely! Keep in mind there are versions that aren't called Titan by other brands. I know venommotorsportscanada.com as bikes similar! And some of the other sites do ship to Canada. I'd suggest looking for 250cc street legal motorcycle in your preferred browser and see what you can find! Thanks for the view and comment! I'll keep an eye out and respond if I find something.
@@darkowlmoto my mate had one of the first ones think it was a lifan or something was a pw80 clone and this is 20 years ago it was a solid bike so can only imagine how good they've gotten since
i contacted sales and believe it or not, the dude told me it'll be 2 months for another shipment of containers. i was like wtf, so i started looking at the apollo thunder
I'm not sure. There is a weight limit but they make others that can handle more weight! Just find one that is rated for more! Off of the top of my head I'm not sure the weight limit.
@@darkowlmoto your link in description and there website, also would you sell the dirt tire rims, i can find the similar bike branded as a trail master but it has 19/17 tires
@zephgage3694 I'm keeping the wheels only wheels I have to make it move lol. U less you're talking about the tires I'm keeping those as well. Just type into google Titan X pro and see what sites have it.
it's a bike that they ride in the Ukraine. I looked it up and it's a Zumav FXR X7. There are some videos on the bike. I think the model you have is the X8 or K8. the X7 is the M model that I have. It's been a while but I think there is more videos on the model you have.
Dude, I’m YOUNG (don’t wanna get my account deleted) and I’m wondering if I’m allowed to use this because I obviously can’t get a license, someone plz tell me if I can it’s about to come in the “mail” 😭😂
@@nylenolan2027 literally just a dirt bike. You have the option to register it in some states to be road worthy but as long as you’re not riding out on the public roadways.
With have own few Chinese bikes checking valve lash is must and with 250 i go 30mm carb better pipe and ive made my air box lid a filter and by cut and mounted a kn flat filter from a mower just ended up being right dimension got a plate of aluminum and cut center out for filter in witch the lip was about have inch and drilled 6 hole to mount to lid also added two 3in holes with hole saw for more air also filters and better quilty chian if on road alot just after having one fail at almost top speed and lay it down do to it locked rear tire and justin bad area i was and also out of no were and yes iam a very experienced rider many titles to prove that it piece of mind also brake fluid change is good the quality isnt best when used hard also pads but as for someone that has experience and does want a beater ive had ok luck with a few alot one ive had were honda clone motors so if ur like me very mechanical with engine's i used honda parts for upgrades just have to do research and have measuring tools calipers, mics so on makes it easier.
It's a great bike for money but can't give a 10 outta 10. Guys are getting carried away with thes bikes. They're great I'm gonna order a Templar 250 X but guys need to realize u only about half the horsepower as a Japanese bike. Great bike to ride around town but if you plan on riding everybody who have a KTMs yamaha's or any other Japanese bike you're not keeping up
I personally give a 10 out of 10. For those who know what clones are know that youd be comparing apples to oranges. Yes it's a bike with two wheels and an engine but all clones are underpowered and have a low top speed. For the price you get a lot. Clones are great for the price and a ton of fun. Cheap enough that my buddies have clones just to mess around on. And then we have our big boy bikes. I had my geom clone and then my triumph 1050 speed triple for the big boy riding. Also make great learner bikes. From learning how to work on them and ride them. So personally I give a 10 out of 10. If you don't know anything about clones and go in with thinking you're buying a powerful cheap bike of course your expectations are going to be shattered. And I could see how that can upset some people.
What are you talking about? A crf250f makes 20.1hp according to dirt rider. And this bike is rated at 19hp. Both are 250cc air cooled engines. What planet do you live on that they don’t make as much power as the Japanese brands? Or are you trying to compare a $10,000 liquid cooled race bike to this air cooled engine lol 😂 This bike maybe $2,000 delivered to your door and a crf250f is $5300 retail. You could buy two of these with riding gear for the same price. And they have superior suspension set ups to the Japanese trail bikes they compete against. AND street legal to boot.
Definitely worth the money. Locktight everything! Ive been happy with mine.
How long do you have the bike ?
@@micwell2247 alittle over a year now
Thanks for leaving out the unboxing. You've seen one, you've seen them all.
I bought my xpro in 2022 and did a quasi supermoto upgrade with a 19” rim with Shinko 705 tires 2 years later still running strong.
Badass!! 🤙🏼
I am the proud owner of a Templar X some caveats: licensing make sure that when you get your MCO that it says motorcycle not off-road dirtbike this has been a constant struggle to get mine licensed. Insurance they would only do liability on the Chinese motorcycle. Nibbi carburetor put this on before you even start the motor cycle buy good American made stainless steel hose clamps and fuel line put your fuel line on the carburetor before you ever attempt to mount it it will save you a ton of time because the space is tight. Nibi makes an ignition I would swap out the original and use a NGK iridium spark plug chances are you’ll never ever have to change it. If you plan on changing your sprocket once again do this before you even start the bike I would recommend a high-quality chain with a rivet master link. As stated in the video Loctite Loctite Loctite. Drain the oil high-quality synthetic. Take your time break in the motorcycle engine slowly. Remember your tempering the steel. Just some suggestions.
How do you make sure the MCO isn’t only Offroad use?
@@Beckswelll when you purchase it make sure that you tell them to type in motorcycle. I had to re-contact and they re-issued one that said motorcycle. The one thing you need to worry about is the EPA rating. My state would not license my motorcycle because the EPA said for off-road use which means it has a spark arrestor in the muffler. It’s not gonna make any more CO2 on the road or off road that’s how stupid these people are. Good luck!
@@Beckswelll have whoever you buy it from type motorcycle on your MCO not off-road vehicle. You also need to make sure that your state will license it mine would not because the EPA sticker approved for off road which only means that it has a spark arrestor there’s no difference in the CO2 or the emissions. But that’s how stupid it gets. Remember you’re dealing with government
@@oneanddonetzone3673what state are you in?
@@drewsss49 I am in the liberal state of Wisconsin. There seems to be a problem with common sense here.
Gteat video, thanks. Ill be checking out more. Hope the bike has been working good.
don't do the Nibbi 28, use a 30. if I'm not mistaken that is what's stock on it now. The 30 was stock on mine.
Yea I was planning on doing the 28 since it would be a direct swap without having to upgrade the intake manifold. My goal is just better jetting and an open intake. With a cone filter.
30mm?
Great video. Trying to decide which bike is best for me. What's 6 ft 1 250 lb going to be like on this bike? Also I'm in Kentucky I think they come from California? Thanks in advance.
@@harrycash8713 you should be good! These bikes are fairly tall and can be adjusted a little bit as well. However I think the seat may be slightly uncomfortable but that’s just me.
Thanks bro im looking to buy one this years so this will be my first bike . Wil be hitting you for more info .
Enduro style is the best way to start. Light, easy and versatile
Highly informative and useful information. Armed now before purchase. Thanks.
Key going to the 12 tooth front cog! More torque and pull in the woods...
Your model has KTM plastics. Mine has Suzuki RMZ plastics. Awesome bikes, they are better than any others they have put on in the past.
What model KTM plastics do you know? I thought about getting different decals at some point
Subscribed btw hope to see more of yours!
Honestly I don't remember, I found mine by looking up team graphics. I want to say yours was 2015 but i don't remember model. I will look them up tonight and send you the link where I buy mine.@@darkowlmoto
RMZ plastics I believe is the Templar X model? Easy to know if you have a 6 speed transmission, it's a Templar X and has a larger motor.
@@peaceprayer595 yeah I know.2007-2009 . How do you think I got the graphics kit
How do those steel rims hokd up?
I have two Roketa quads from the early 2000's, both still run with little to no issues each year.
Like the rest of us, grew up riding Japanese bikes and love them still, but seriously looking at this or one like it for dual sport, trails in Boise, ID. That price is hard to beat.
No issues at all with the rims! Been almost a year haven’t had any issues.
Im holding off of the changes. Im re jetting the stock carb. I can change it later if im dissatisfied. Ill deal with chains and sprocket later. What i want to see is a catalytic converter removal video. Cant find one
I don’t believe these bikes have a catalytic converter. The large portion of the exhaust on the side is a baffled chamber to help with toning down or dampening the sound. Only emissions like system is the charcoal canister evap style system on these. Which isn’t much.
Hey, got a question for ya. I bought my Titan 250 DLX just a little bit ago and I'm curious to know if your Titan had issues with the throttle. I'm getting it fixed here soon with the help of my buddies but I'd just like to know how yours was out of the box. Mine currently will hit the full throttle at just half way. If I fully engage the throttle, it kills the bike.
@@hazeyknight4206 mine was totally fine. I will say a pinch in the throttle cable(s) can cause this. I would just adjust the throttle cable(s) and possibly re route them. I’ve seen sometimes the turning of the handle bars pinches the cables and can be an issue even a simple fix as adjusting the grip so it doesn’t stick. Can also check the screw on the clear cover of your throttle over tightening can cause it to stick also or cause throttle issues
@@darkowlmoto hey, late update but my buddy's father worked on the bike and fixed it. There were actually a couple things off about it but he got it fixed. Runs pretty good.
@ glad you got it figured out!
Do the decals come off
@@devantanetter9512 they do. Very easily
I have an X-Pro Storm 150. I'm wanting to change wheel size form 19/16 to 21/18. Any ideas of where to get wheels? You mentioned going to a different size front.
Can look at xprousa website or Amazon. Just make sure the hub is the same and the axle size
Are these street legal in Indiana?
I can’t find on the website where is says so. I don’t wanna buy it and find out I can’t plate it
That I cannot answer. I'm from Illinois so I'm unsure. Your best bet would to check with your local dmv and local laws on bikes that are off road motorcycles and if they can be legally plated.
Is it too high for a 5’7” rider?
@@rkkong not at all! I’m 5’9”
@ thanks bro
@ 🤙🏼
Would I be able to put on a 30mm carb instead of a 28mm and what difference would that make ?
Yes you definitely can! And just a bit more power but you'll really have to mess with the tuning
Is there a difference between the x-pro titan and x-pro titan DLX. I only see the titan in this color on Amazon but I want all the blinkers and mirrors like you have.
DLX stands for deluxe I'm assuming. it was purchased at powersportsmax.com I think I posted the link in my description.
It says it’s out of stock but yea it seems like I definitely need the DLX. Thanks for the reply!
@@FreeRioDaYungOG34 no problem! they are pretty popular. hope you can get a chance to order one! when they get them back in stock!
I have the Trailmaster tm35, and it is exactly the same as the titan
@@JoshuaMitchek-ur4jtdamn I was going to get tm38 is it really the same?
Is the shipping service actually good.
looking at getting one but am a little worried about the 2.5 star service.
I’ve never had problems using them. Some people give them shit reviews because of stupid reasons. Or because of the shippers and how they handle the bikes.
Ive had an Apollo rfz 125cc great engine and durable frame! Had an Apollo DB36 good engine but shit frame and hard to work on. Also had a pitster pro lxr 250f which was pretty dope but the chinese fuel injection system didnt work all that great so stick with a carb if you can. Currently thinking of swooping one of these x pro's up soon.
What’s state are you in , because I went to the dmv in Georgia and they told me it cannot be registered in America
I'm in Illinois. It can be registered anywhere. But being plated is the iffy part.
@@darkowlmoto yeah that’s my issue rite now , did you get yours plated ?
@gonzarluswilliams5412 I need to asap but no not yet. I had to get the paperwork updated to say motorcycle instead of "off road motorcycle"
Look up dirt legal
Where could i get this bike everywhere i look it says its out of stock
It's riding season and getting warmer in the cooler wetter states so they are being bought up fast. You may just have to patiently wait. There are other alternatives out there that are just as good if not a little better! Just search online! Street legal dirt bikes and go from there. Hope this helps!
i contacted sales and they told me it'll be 2 months for another shipment of containers. The best thing you can do is to get notifications of their site on amazon when they get them in stock. I'm ordering three.
What is the cost to register that bike in Illinois ?
I can’t remember but I want to say around 300 ish
Where did you get the 12 tooth front sprocket?
Purchased off of amazon. I cant remember the price at the time. But no more than 10 bux.
@@darkowlmoto sorry to bug you but do you recall how you looked it up? Nothing is coming up under "x pro sprocket " or the like... thanks again.
@@MrMattiezaya2 yup so most sprockets you wont need to look up by brand. Youll want to look up by size. So youll first want to look up how many teeth. And the pitch. 520 is your chain size/pitch on the sprocket. So look up 12T front sprocket 520 pitch.
@@darkowlmoto thank you! I greatly appreciate the help its on order now... my son will be much happier
@@MrMattiezaya2 no problem at all! Just make sure you know exactly how many teeth to get per what youre lookong for. More torque or a little more top end
Yep same experience. Ordered from powersports which is located in cali and have received both my titan and my qaud raptor clone within a week here in AZ. Pro tip: when ordering from powersports max just use the toll free phone number to order (you’ll talk to an actual person) their account creator is junk, but keep in mind you won’t be able to track your order and the only reach out is an emailed order confirmation. I ordered in November of 2023 and received a 2022 titan and the quad I ordered at the beginning of 2024 was a 2023. Both vehicles have exceeded my expectations. Buy now before they realize they are undervalued by at least $500-1000.
2 more things I’ve noticed on powersports at least, stock is running low as the titan DLX model(street legal) is no longer listed but the “dirt” version is, which means the newer model years will probably be restocked.
The other thing is X-pro is remarkably in tune with its customer base as every new model year seems to improve in design and components from the previous model’s shortcomings, which is awesome but I fear price creep will be inevitable.
is there a way to buy it fully assembled?
I've seen on the power sportsman site they offered assembly for a fee. But it's not that hard and you get familiar with it
I'm getting the x-pro templar m 250 have you seen it and if so what do you think of it?
Great bike! I believe it's a 6 speed.
When did you ordered this? Mine is set to deliver next week I just ordered it. Just wondering if I will get the 2023 model. And post more videos of it lol
More to come! I ordered mine on the 19th! Came pretty fast.
@@darkowlmoto okay cool!! Good stuff
Yeah in their website the picture of the Titan DLX is outdated.. the one in this video looks more like a Templar, so I wonder what's going on, if we order this week what are they gonna send us? I tried to order one and the page is not working for the CC payment 😢
@@rudyshoplopez7366 mine came as a 2023 but looks like the older model, don’t have the led turn signals and the new decals and exhaust etc. I ordered a red one. Mine show was built in 08/2023
@@rudyshoplopez7366 there are several different ones at similar price points on their site I didn't understand it myself. All day titan
Hey Dark! First of all, nice video!!! Really nice to see a trustworthy review of a Chinese bike from someone that really uses it and not just someone paid by the big 4s to say they are crap. Question for you, I am new to motorcycles, and I am looking to buy one of those Titans. Unfortunately, here in Toronto is really hard to find information on these bikes, do you have any idea how I can get one here? Thanks man!
Definitely! Keep in mind there are versions that aren't called Titan by other brands. I know venommotorsportscanada.com as bikes similar! And some of the other sites do ship to Canada. I'd suggest looking for 250cc street legal motorcycle in your preferred browser and see what you can find! Thanks for the view and comment! I'll keep an eye out and respond if I find something.
@@darkowlmoto perfect! Thank you very much man! I appreciate the help!
@@thiagomvrch I don’t know how good Amazon is in Canada but they have tons of these bikes on there…
Think this a great beginner bike or should i get a 125cc?
I'd start with either one! Both are great beginners and fun.
Pretty sweet bike and as you said alot of Chinese bikes parts are a nightmare to find but the newer ones are just clones of name brand
I have a soft spot for a Chinese bikes I love my name brand bikes but I keep going back to the Chinese ones because they are so fun.
@@darkowlmoto my mate had one of the first ones think it was a lifan or something was a pw80 clone and this is 20 years ago it was a solid bike so can only imagine how good they've gotten since
I'm trying to buy it but it says unavailable 😢😢
Yea I'm seeing that e erywhere as well. There are other options out there! Look up 250cc street legal dirt bikes
i contacted sales and believe it or not, the dude told me it'll be 2 months for another shipment of containers. i was like wtf, so i started looking at the apollo thunder
How much do you pay for insurance ? A month
I pay $26 I'm also 37 with no tickets or a record. So it's going to depend on a ton of factors
Does it come with a title?
It comes with an MCO in which you need to take to your dmv to get a state title
Bought a used 20/20 x pro Titan 250 KTM plastics will interchange
Is it a 4 or a 2 stroke
@@landongoforth3050 it's a 4 stroke
Waiting on delivery 🏍️🏍️
Awesome review of the bike. Ty!!! Do you think the bike could handle a 245lb person easily?? Thanks again.
I'm not sure. There is a weight limit but they make others that can handle more weight! Just find one that is rated for more! Off of the top of my head I'm not sure the weight limit.
@@darkowlmoto ty
@@Coco-Crisp25 sorry wish I was more help
@@Coco-Crisp25the titan is rated at 250 but the 250 Hawk is a heavier bike that’s rated for 330
Could have drug the screw up the exhaust with a magnet
@@AnthonyJones-px6ve it was a pain! I tried for an hour lol
I'm having trouble keeping the bike on
Can these be plated for road use ?
Yes they most certainly can!
@@darkowlmoto looks like it could be a cheap supermoto build
@@eliaskefalas373 definitely can upgrade some parts. Thing is fun and definitely pretty torquey for wheelies. Punchy on top end!
@@darkowlmoto what's the top speed ?
@@eliaskefalas373 I have yet to do a top speed as I've been only riding it under redline to break it in properly.
top speed?
Roughly 70mph depends on rider weight and conditions
i wish these where not out of stock, i can’t find them anywhere help!
Where have you looked?
@@darkowlmoto your link in description and there website, also would you sell the dirt tire rims, i can find the similar bike branded as a trail master but it has 19/17 tires
@zephgage3694 I'm keeping the wheels only wheels I have to make it move lol. U less you're talking about the tires I'm keeping those as well. Just type into google Titan X pro and see what sites have it.
@@darkowlmoto no one has the street legal version with blinkers
@@zephgage3694 ah yea will just have to keep an eye out or call and see when they are back in stock
it's a bike that they ride in the Ukraine. I looked it up and it's a Zumav FXR X7. There are some videos on the bike. I think the model you have is the X8 or K8. the X7 is the M model that I have. It's been a while but I think there is more videos on the model you have.
Yup! The MCO says Zuma is the brand.
Good video Dark Owl I look forward to enjoying my new dirt bike soon. Awesome work ✌
I been wanting a trail bike but think I'll go with a Honda
Is this bike to high for someone 5'3"
Yea it very well could be.
@@darkowlmoto thanks 😊
Black forks are smooth Kawasaki and Honda should take notes
I'd call those rotors " drilled".
When purchasing these bike, make sure to ask the seller to send a street legal MSO along with the bike.
Yea I had to contact them and tell them so they did!
Dude, I’m YOUNG (don’t wanna get my account deleted) and I’m wondering if I’m allowed to use this because I obviously can’t get a license, someone plz tell me if I can it’s about to come in the “mail” 😭😂
@@nylenolan2027 why would you account deleted? Anyone can use it as long as you don’t use it on the road.
@@nylenolan2027 literally just a dirt bike. You have the option to register it in some states to be road worthy but as long as you’re not riding out on the public roadways.
I'm sold.
You don’t need a plate late if you pull over
Illinois you need a plate light at night.
With have own few Chinese bikes checking valve lash is must and with 250 i go 30mm carb better pipe and ive made my air box lid a filter and by cut and mounted a kn flat filter from a mower just ended up being right dimension got a plate of aluminum and cut center out for filter in witch the lip was about have inch and drilled 6 hole to mount to lid also added two 3in holes with hole saw for more air also filters and better quilty chian if on road alot just after having one fail at almost top speed and lay it down do to it locked rear tire and justin bad area i was and also out of no were and yes iam a very experienced rider many titles to prove that it piece of mind also brake fluid change is good the quality isnt best when used hard also pads but as for someone that has experience and does want a beater ive had ok luck with a few alot one ive had were honda clone motors so if ur like me very mechanical with engine's i used honda parts for upgrades just have to do research and have measuring tools calipers, mics so on makes it easier.
Yep! I always upgrade everything. This is just the first video and already ran over 15 minutes. I'm 37 now been riding motorcycles since I was 18.
It's a great bike for money but can't give a 10 outta 10. Guys are getting carried away with thes bikes. They're great I'm gonna order a Templar 250 X but guys need to realize u only about half the horsepower as a Japanese bike. Great bike to ride around town but if you plan on riding everybody who have a KTMs yamaha's or any other Japanese bike you're not keeping up
I personally give a 10 out of 10. For those who know what clones are know that youd be comparing apples to oranges. Yes it's a bike with two wheels and an engine but all clones are underpowered and have a low top speed. For the price you get a lot. Clones are great for the price and a ton of fun. Cheap enough that my buddies have clones just to mess around on. And then we have our big boy bikes. I had my geom clone and then my triumph 1050 speed triple for the big boy riding. Also make great learner bikes. From learning how to work on them and ride them. So personally I give a 10 out of 10. If you don't know anything about clones and go in with thinking you're buying a powerful cheap bike of course your expectations are going to be shattered. And I could see how that can upset some people.
What are you talking about? A crf250f makes 20.1hp according to dirt rider. And this bike is rated at 19hp.
Both are 250cc air cooled engines.
What planet do you live on that they don’t make as much power as the Japanese brands?
Or are you trying to compare a $10,000 liquid cooled race bike to this air cooled engine lol 😂
This bike maybe $2,000 delivered to your door and a crf250f is $5300 retail. You could buy two of these with riding gear for the same price. And they have superior suspension set ups to the Japanese trail bikes they compete against. AND street legal to boot.
That site is a scam, buyer beware
I Never had a problem