Tuning a M50 turbo on MS41

Car was a little tricky. Its a m50 with a front mounted crank sensor running OBD2 ms41.
Hint: Don't bother using MS41.1 FW, it will pickup false misfires and have you chasing your tail! Upgrade to MS41.2!

[@MrEsaleniuc]

Ran across your channel after the Volvo video got posted to Reddit. You are a certified wizard. I’d bring a car to you and I’m on the west coast if I ever needed something like this done

[@niko7090]

I got 302hp/6200rpm and 400nm/4600rpm with 7psi boost from m52b25, ms41.2 and my own street tune. We just measured low boost because I needed that dyno sheet to get the car road legal 😃

[@bonisyafialdi2286]

Stock maf?

[@ryanmanuel9161]

Seeing all these 36 tuning videos just makes me super jealous haha

[@spankranchgarage]

This could be you if you want your finances ruined

[@Driftlife36]

You think the tuner was getting a false lamba reading? The sensor seems really far down the exhaust

[@Fouad_1979]

Ms41 ecu with PMAS HPX MAF

[@md0246]

Where you located, I'm ready to turbo my 98' M3.

[@josephdavis1445]

Where are you located need my 328 turbo tuned

[@tylercook1012]

Can you put ms41.2 firmware on the ms41.0? Also running front mount crank sensor on a euro engine

[@spankranchgarage]

I don’t know for sure. Take a look around the web I know that’s been asked many times. I don’t want to mislead you

[@DAYTONA_E36]

Yes, it can be done on ms41

[@michaeltorres492]

Can I get away with running stock head gasket and bolts on m50b25tu with 8 psi?

[@spankranchgarage]

Absolutely I wouldn’t hesitate

[@michaeltorres492]

@@spankranchgarage thanks for the quick reply. I appreciate it. It's cool you have a Dyno.

[@IghirGarage]

What's the part number on that wideband.

[@spankranchgarage]

These are the sensors I have the most luck with. 17212 amzn.to/3RcxWZB

[@IghirGarage]

@@spankranchgarage thank you
Where r u located ?

[@blastinblanks9792]

Dude ill pay you to help me tune my m52 with similar setup

[@rabeesaleh1457]

How to contact you

[@foreignslab121]

Brooo im rebuild his my m52 and im going to need your help! Do you you have an Instagram?

[@andriusbudrys7471]

MAF placed before turbo inlet?

[@spankranchgarage]

After. Blow through configuration

[@andriusbudrys7471]

@@spankranchgarage thank you!

[@Lucky-ch5cv]

How do you run ms41 on m50?

[@spankranchgarage]

With a standard front mount crank sensor and MS41.2 firmware it works well

[@sidedriveboy3526]

this is m52

[@spankranchgarage]

It’s a m50 block/rotating assembly. No crank sensor hole

[@bravesoulgarage]

@@spankranchgarage Could You send me rom from this ms41?

[@Fouad_1979]

It s a drift car

[@Fouad_1979]

Hi, I m trying to finish my first m50b25 build, with Turbo GARRETT GT3076R, forged pistons/rods, 440 cc/min Deatschwerks injectors, Turbosmart external wastegate, FPR, ATHENA hg etc... but my tune is a shit. Can you send me your email so we agree on a remote tuning paid service pleasssse ?

[@deeznits6513]

still need tuned?