So I just turned 40, I was also diagnosed with COPD so I can’t smoke at all. I work as a dasher in a small town and have my own tent setup, I am pretty close to starting a run and well now be switching to edibles because I found out you can make edibles with shatter and wax❤❤❤❤
Not when you are initially pressing. It is decarbed once you put the rosin, in the decarb capsule. It is the act of heating your extract just enough to activate the cannabinoids and unlock the psychoactive effects of cannabis
Always got some youtube genius on here with no TH-cam channel or anything going for them thinking what you say means anything. How do you figure it pulls exactly 40% of the oil out? Are you a scientist? Stay in your own lane lame
Not stupid at all! You would not want to just soak raw flower in the oil to make edibles. You have not decarbed or extracted any rosin and therefore you would not feel any affects and would waste product!
@@brandonbaker8584 Exactly I was under the impresssion the pucks become decarbed after we press them... I believe it's because it's not completely decarbed only some of it is.
@Nugsmasher How many grams of rosin should I use with 100 ml of mct oil to go with 1 pack of jello? Also I see you use 100 ml for 40 pucks, 50 ml for about 20 pucks is this a consistent amount you use? 25 ml per 10 pucks? Love my new Nugsmasher XP. Thanks
Does anyone know how much thc oil can hold. What is the saturation point where you are just wasting pucks. Nobody has paid foe that test yet that I can find. Enjoy everyone, great recipe.
I think the saturation point would vary depending on the oil being used but it’s all anecdotal and theories. MCT holds the most from what I heard but the exact amount is unknown to me.
It really depends on how high you want to get each dose. I’m medical and store stuff just isn’t strong enough but my friends who only use rec hate my gummies cause they knock them on their asses. When I’m done pulling my pucks if it doesn’t look or smell strong enough I’ll add straight fire hash rosin to my mix. Really in my opinion the sky’s the limit but……at what point are you plateauing your high, meaning I was dabbing so often and so much that I could take four or five fatty dabs of some fire and not feel any higher after the first two or so. I figure my gummy worms are between 200-400 mg of thc and taste fire, but I love the taste of cannabis so it’s really up to you and your preference. Do you want something that’s going to zombify you and your homies are do you want something to have in with? Personal preference. Play with it and figure out what works for you. TH-cam tutorials aren’t perfect recipes for everyone and if you ask 100 cannabis guys how to make the perfect gummy you’re going to get 100 slightly different answers! Don’t be afraid to experiment! Happy hunting
Hey I'm a bit late to this party but - what do you drop in at 2:09 - after the water but before the agave? Is that to help stir? What is it called? Also how much gelatin is in "1 package"? Thanks!
No worries, we're here!! That is something to help with stirring it, I'm sorry I don't recall the name. Room temp water, Agave then 3oz of Jello & 1 pack of gelatin, is what we put in after the water! Thanks for watching!
Just a couple questions id like answered please. When i put in 100ml of the MCT oil in and did my 36 pucks i had 70/75ml of liquid left when you had about 30ml. Also i tried to use jelly crystals but when i put 3oz of that in it went solid. So i take it these gello crystals is an American thing as i cant find them anywhere here in the uk. If you have a link for them could you stick it up.
I used double boiler for abt 2-3 hrs with abt two pounds worth of pucks pressed at 207. In 56oz of coconut oil... Any idea how potent the coconut oil is? Does about 10,000 mg total, seem rite or way off?
Yeah I just realized I commented on the wrong one of your videos; I will say I definitely noticed a difference adding agave to the mix... definitely a sweeter result
@@brandonbaker8584 He discarded ⅔ of the gelatin base so the extracted oil would be less diluted when he mixed them together. A greater concentration of the good stuff. If he wanted to make the candies weaker, he could use more of the gelatin base on the next batch.
@@devotrippin thanks. I wasn't sure what one he was removing with timing he said it in video. I was thinking he meant. He took out 2/3 of oil. And then did this but thanks for informing me. Any wait to try and make em.
Hey, we actually squeeze the pucks after cooking them in the MCT oil & then repeat that. This way we're getting everything out them! Thanks for watching, we appreciate your support.😎
DAM THESE LOOK LIKE GUMMIES I WOULD DO TEN OF TO SEE WHAT KIND OF HIGH BUT WILL USE IT TO USE UP MY PUCKS HAVE ABOUT 40 OR SO IN BAG JUST WAITING ON RECIPE LIKE THIS LOL HAVE A AWESOME DAY NUGSMASHER TEAM GREAT VID AND LOVE THE PRESS APP
@@canadianeastcoastdabbingcr2168 We usually use around 204F but will depends on the strain as well. we usually recommend starting at 204f for 120 seconds, and adjust from there.
Hi Nathan, coconut oil would work as well any medium with a high fat, glucose and glycerin content for bonding with the THC. We like to use MCT because it has a much longer shelf life than coconut oil does.
@@Nugsmasher so I got all my pucks and double boil it in some coconut oil so the coconut oil is infused so I can just get it up to temperature so It can decarb ?
I have no idea what is beining done here. Puck? We did some things way back in the day but never dreamed this. I stopped because of children and random testing but a year and a half ago after 25 hiatus I found out weed has changed from " down to stems and seeds blues to weed that has names. Lol. It took a little time to " adjust" and I thought about going on wagon permenatly because I had a strange dsire to crawl under the bed , hide. I chose to try again because at 65 if got under , Id never get out. By taking one tiny hit then over time another I gradually began like and enjoy again. A third hit has not been needed. As I see whats being "cooked " I cannot imagine the effect and my question is how high do ya wanna be? Id appreciate knowind what this started as , what it is known as finished and effect. Tnx.
We dont sell edibles. We sell rosin pressing units and accessories. We give you the tools to create whatever you like in the comfort of your own home. Check us out at NugSmasher.com
Can I assume the hot plate/magnetic mixer is on the lowest heat setting? It doesn’t look like it’s on at all but I know you need some heat to get that stuff to dissolve and mix together.
I love this recipe but numerous times I have had to drain the molds, and re-mix the liquid under heat and refill to get them to set. I know recipe on Jello box asks for boiling water, any suggestions? The ingredients rock the high - thanks NS
This recipe didn't work for me. The gummies never solidify and stay in a mush half liquid state. Even when I put them in the freezer... followed the instructions exactly so not sure what went wrong. Eating the messy mushy result does get the desired effect though.... are potent. Update** 10,000x easier to buy a bag of haribo gummybears, melt them down in microwave and just mix in the oil from the first beaker.
Hey There, That depends on how you make them. You can make them to do different types of effects. Please watch more of our videos to help you out with this.
Now the question is can you smoke the pucks after you press them my son says no he says that the fibers from the micron bags get stuck in the plant matter and you end up smoking micron!!! Can't be healthy to smoke it so I will be trying this method thanks guys!!!
Hey there! You cannot smoke the actually pucks but we do have a process where they can soak in MCT oil or cocount oil and you can use that as a tincture or whatever your heart desires 😉 Check out this video th-cam.com/video/X5tMiybynP4/w-d-xo.html
Really dont think this was the best way you could have done it. you probably lost just as much as "extracted"... I WOULD HAVE soaked it in 99% iso over nite than put in a cheese cloth and a vice nd squished till it was NO MORE coming out... and you would have done Way better... evaporate and than mix with your oil... Than heat it for decarb.. IN MY OPINION, of course... 🤔
So I just turned 40, I was also diagnosed with COPD so I can’t smoke at all. I work as a dasher in a small town and have my own tent setup, I am pretty close to starting a run and well now be switching to edibles because I found out you can make edibles with shatter and wax❤❤❤❤
I can’t wait to get a nug smasher press
Awesome! When you are ready head over to Nugsmasher.com
I’m allergic to coconut oil, what do y’all prefer to use a substitute to the MCT oil?
You could use avocado oil.
Olive oil or grass fed unsalted butter
Propylene Glycol is generally as good if not better.
@@PlanktonWhisperer cap
@@demonetizedhistory5806 Look it up.
Just ordered my press, super excited to try this out.
Thank you for your purchase. Enjoy!!
Could you be more specific on the puck temperature. Low is a relative description.
about 150-180F
Are you decarbing the pucks before they go in oil or is it decarbed at 240 in the oil?
It is being decarbed in the oil at 240 degrees. Always save your pucks!
Damn you can make anything with a nugsmasher
You sure can! Head over to nugsmasher.com to check out our current sale! 😎
At 2:08 you put something in the mix but didn’t say what that was…. Curious…
That white pill thing? That's a stir bar, the plate has a magnet that spins the bar to stir the contents of the container.
What the device called? Hot plate?
so how many gummies did you eat at once to be really baked? would be nice to have a comparison
Thank you
You said something that it's fully decarbed at a minute and 24 seconds period is it already decarbed when you send it through the Press?
Not when you are initially pressing. It is decarbed once you put the rosin, in the decarb capsule. It is the act of heating your extract just enough to activate the cannabinoids and unlock the psychoactive effects of cannabis
Hey there, is that a scale+heating plate? how's that equipment called?
Hey Marcel, that is a hot plate we used. You can find them online & almost anywhere.
Yes please over here.
Awesome. Time to do some product testing.
great video guys, for all you "vegan" folk, just put the mct/puck mixture straight into capsules and swallow. same as a gummie no sweetners.
Powder Soy Lecithin works too?
Can I get the same results using coconut oil instead of mct oil?
@Smoked Out Tutorials, I'm not sure about coconut oil versus MCT oil. If you try it, please let us know how it turned out!
@@Nugsmasher what’s that blender you are using please share
do you need to have specific beakers for the magnetic stirrer?
glass or non-metal beakers
your last puck is pulling 40 times more concentrated oil from your batch when you pull it than the first did.
How would you avoid that
It doesn't matter. You are straining the bags. It's part of the process.
If you only had something to press and squeeze the pucks with…. 🤦♂️
Always got some youtube genius on here with no TH-cam channel or anything going for them thinking what you say means anything. How do you figure it pulls exactly 40% of the oil out? Are you a scientist? Stay in your own lane lame
i always press my pucks at 80C then 104C to get all rosin would this still work?
Can you do the MCT process with straight rosin?
Hey when you guys mix the jello and gelatin and agave do you do it over heat
Hi Jason, we mix it together without heat.
This may be a stupid question but could you just use unpressed buds in the micro filter instead of the chips? Any differences in potency or outcome?
Not stupid at all! You would not want to just soak raw flower in the oil to make edibles. You have not decarbed or extracted any rosin and therefore you would not feel any affects and would waste product!
@@Nugsmasher Thanks for the info, for some reason I was under the impression your chips weren't decarbed.
There's never a stupid question just a curious one
The pucks are or are not decarbed when pressed for rosin. And if so. Why the need to do so a second time
@@brandonbaker8584 Exactly I was under the impresssion the pucks become decarbed after we press them... I believe it's because it's not completely decarbed only some of it is.
@Nugsmasher How many grams of rosin should I use with 100 ml of mct oil to go with 1 pack of jello? Also I see you use 100 ml for 40 pucks, 50 ml for about 20 pucks is this a consistent amount you use? 25 ml per 10 pucks? Love my new Nugsmasher XP. Thanks
How many gram of gelatine did you use? And is it replaceable with agar agar?
That's funny, I use the same molds for my company!
Right on!
What if I just soak buds in the mct oil and press/ squeeze it out so I get every bit
Using the nug smasher
Probably not necessary but couldn't hurt.
Your good man
Will this method work with butter also?
yes you can make butter with the pucks as well
Update, infused 1 oz worth of pucks into 1 stick of butter using this same method. Works great!
whats the device thats heating and stirring? need one!
found it
Awesome, glad you found it!!
What is the device??
This oil is going to be real strong! Haha abit of a understatement
did you add the full 100ml?
Does anyone know how much thc oil can hold. What is the saturation point where you are just wasting pucks. Nobody has paid foe that test yet that I can find. Enjoy everyone, great recipe.
Honestly I've seen a QP to a pound go into an extraction but yes I want to know that same question
I think the saturation point would vary depending on the oil being used but it’s all anecdotal and theories. MCT holds the most from what I heard but the exact amount is unknown to me.
More fat and you can do a few ounces in around 13 cups of oil so coconut and avocado with nuts inside can make some fiee
It really depends on how high you want to get each dose. I’m medical and store stuff just isn’t strong enough but my friends who only use rec hate my gummies cause they knock them on their asses. When I’m done pulling my pucks if it doesn’t look or smell strong enough I’ll add straight fire hash rosin to my mix. Really in my opinion the sky’s the limit but……at what point are you plateauing your high, meaning I was dabbing so often and so much that I could take four or five fatty dabs of some fire and not feel any higher after the first two or so. I figure my gummy worms are between 200-400 mg of thc and taste fire, but I love the taste of cannabis so it’s really up to you and your preference. Do you want something that’s going to zombify you and your homies are do you want something to have in with? Personal preference. Play with it and figure out what works for you. TH-cam tutorials aren’t perfect recipes for everyone and if you ask 100 cannabis guys how to make the perfect gummy you’re going to get 100 slightly different answers! Don’t be afraid to experiment! Happy hunting
How long can you store pucks for?
We have stored them in freezer for up to a year with success. I’m guessing you could even store beyond in right containers
Hey I'm a bit late to this party but - what do you drop in at 2:09 - after the water but before the agave? Is that to help stir? What is it called? Also how much gelatin is in "1 package"? Thanks!
No worries, we're here!! That is something to help with stirring it, I'm sorry I don't recall the name. Room temp water, Agave then 3oz of Jello & 1 pack of gelatin, is what we put in after the water! Thanks for watching!
@@Nugsmasher thanks for the reply, but how big is the pack of gelatin? I have a large container so I need to know how much is in the pack.
That's called a Mag Bar or Stir Bar. It's used with stir plates in labs
It is a magnet, it is lab grade equipment used to mix
@@scottieb1 Im pretty sure .5 OZ bags of gelatin are being used... look up the brand he has and look at the packaging online to see the size ya know
What did I do wrong if I have separation from the jello and oil
What is MCT oil?
MCT oil is a dietary supplement that is distilled from coconut oil.
about how much was the total mg of thc in the oil from the 40 pucks?
with pucks it is very hard to know how much THC is left over, unless you test the oil after.
Nice job guys!!
How much gelatin do you use after the 3oz of gello?
the Gelatin packet was 2 -1/2 tablespoons
Amazing
Thank you! Cheers!
Hey ,
Do you have to decarboxylate in the oven before passing them through the oil ?
Hello Kevin, that is correct! or you decarb right on your nugsmasher plates with our decarb capsule.
@@Nugsmasher thank you for your message! I have succeeded my recipe , nice ;)
whats the thing called you use to heat up the beaker?
A hot plate
@@Nugsmasher I have that exact hotplate.....does your Temps bounce everywhere? I can't get mine to hold a stable temp
Just a couple questions id like answered please. When i put in 100ml of the MCT oil in and did my 36 pucks i had 70/75ml of liquid left when you had about 30ml. Also i tried to use jelly crystals but when i put 3oz of that in it went solid. So i take it these gello crystals is an American thing as i cant find them anywhere here in the uk. If you have a link for them could you stick it up.
www.amazon.com/Jello-Berry-Gelatin-Dessert-Jell/dp/B00CGNGQXE/ref=asc_df_B00CGNGQXE/?tag=hyprod-20&linkCode=df0&hvadid=598274538151&hvpos=&hvnetw=g&hvrand=32938981133513817&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9030350&hvtargid=pla-440713464622&psc=1
I used double boiler for abt 2-3 hrs with abt two pounds worth of pucks pressed at 207.
In 56oz of coconut oil...
Any idea how potent the coconut oil is?
Does about 10,000 mg total, seem rite or way off?
hightimes.com/edibles/how-to-calculate-thc-dosages-for-homemade-edibles%E2%80%A8/
One day I dream of owning a nugsmasher!!!!!!!!!!!!!!!!!!!!
Is Citric acid absolutely necessary?
We did not use citric acid in this video. However some forums advise you may use citric acid for a more sour flavor.
Yeah I just realized I commented on the wrong one of your videos; I will say I definitely noticed a difference adding agave to the mix... definitely a sweeter result
What is the machine?
Hi, the machine that we used in this video to heat the pucks will be a magnetic heater/ stirrer you can find them at various prices on amazon.
What is the Agave for
Adding a little sweetness and the cannabinoids bind to the sugar crystals
Now I know what to do with my pucks thanks!!!
Id ligthy repress all the pucks to run into a jar and then cook and refilter
Hey There Nat, That sounds like great process to get the best out of your pucks please make sure to share your results on www.Terpfiles.com.
great IDEA!!!
If you guys need a product tester let me know! For science purposes only of course. 😅
What do you mean want to make it strong so you got rid of 2/3 mix. What mix😊
Got a heart. But still wondering 🤔
@@brandonbaker8584 He discarded ⅔ of the gelatin base so the extracted oil would be less diluted when he mixed them together. A greater concentration of the good stuff.
If he wanted to make the candies weaker, he could use more of the gelatin base on the next batch.
@@devotrippin thanks. I wasn't sure what one he was removing with timing he said it in video. I was thinking he meant. He took out 2/3 of oil. And then did this but thanks for informing me. Any wait to try and make em.
How much plain jello after the three ounce of flavoured ???
1 packet which is 1oz (28g)
@@Nugsmasher I know this is old, but isn't that 1/4 oz of gelatin, or one packet?
Can u use guar gum instead of lecithin?
You can use whatever you prefer, but using an emulsifier such as lecithin will help the absorption of THC when ingesting those edibles!
How many gummies is a good amount for a daily smoker?
We wouldn't have that exact info but please indulge responsibly 😀
it looks like most of the mct is is getting absorbed by the flower in the pucks. don't you want to avoid that?
Hey, we actually squeeze the pucks after cooking them in the MCT oil & then repeat that. This way we're getting everything out them! Thanks for watching, we appreciate your support.😎
puck-a-licious !
Do I have to go on the black market to buy one of these red gummies🕴️
Maybe 🤔
Depends where you live.
wait, so i shouldnt be throwing them out?
NO1!! Keep them in a Ziplock bag & stock up, there's still more in there!!
Just made some rosin butter and omg put me on my azzzs. Can barley keep my eyes open lmao!!!!
I followed your recipe but the gummies did not harden. Any thing I should focus on?
it can sometimes take up to 48 hours to harden, 24 hours on each side in the fridge
DAM THESE LOOK LIKE GUMMIES I WOULD DO TEN OF TO SEE WHAT KIND OF HIGH BUT WILL USE IT TO USE UP MY PUCKS HAVE ABOUT 40 OR SO IN BAG JUST WAITING ON RECIPE LIKE THIS LOL HAVE A AWESOME DAY NUGSMASHER TEAM GREAT VID AND LOVE THE PRESS APP
Thank you for checking out the video we appreciate it! Have an amazing day 😊
@@Nugsmasher 1question if you could help for the induction heater what temp you use for such a golden return ???
@@canadianeastcoastdabbingcr2168 We usually use around 204F but will depends on the strain as well. we usually recommend starting at 204f for 120 seconds, and adjust from there.
Why not coconut oil
Hi Nathan, coconut oil would work as well any medium with a high fat, glucose and glycerin content for bonding with the THC. We like to use MCT because it has a much longer shelf life than coconut oil does.
What's the reason for the decarb
Makes your edibles a lot more potent!
@@Nugsmasher so I got all my pucks and double boil it in some coconut oil so the coconut oil is infused so I can just get it up to temperature so It can decarb ?
@@85artz31 230-270
What’s the spinning thing
beaker mixer
Whats the use of the sunflower liquid lecithin?
It is a bonding agent to help your body absorb the THC.
It's an emulsifier.
Damn I'm tryna have some
I have no idea what is beining done here. Puck? We did some things way back in the day but never dreamed this. I stopped because of children and random testing but a year and a half ago after 25 hiatus I found out weed has changed from " down to stems and seeds blues to weed that has names. Lol.
It took a little time to " adjust"
and I thought about going on wagon permenatly because I had a strange dsire to crawl under the bed , hide. I chose to try again because at 65 if got under , Id never get out. By taking one tiny hit then over time another I gradually began like and enjoy again. A third hit has not been needed.
As I see whats being "cooked " I cannot imagine the effect and my question is how high do ya wanna be?
Id appreciate knowind what this started as , what it is known as finished and effect.
Tnx.
How much for a jar
We dont sell edibles. We sell rosin pressing units and accessories. We give you the tools to create whatever you like in the comfort of your own home. Check us out at NugSmasher.com
Since when in the hell do you throw away 2/3rd of the product to make it stronger? wtf?
they threw away 2/3 of the jello mix, added weed oil to the remaining 1/3. so 3x as strong per gummy
Swap the Jell-O and Gelatin for fruit pectin and these are vegan.
Thanks I was about to ask what the difference was
I chicken jerked and ate 456 mlgs it fizzles my mullet
I did this a while ago I put 200 used pucks try 200 nug smasher I even put it on you tube man I knocked every one out with my candy lol
😵
Too strong for me, I will just stick to the bud.
Can I assume the hot plate/magnetic mixer is on the lowest heat setting? It doesn’t look like it’s on at all but I know you need some heat to get that stuff to dissolve and mix together.
You would want to start low!
I love this recipe but numerous times I have had to drain the molds, and re-mix the liquid under heat and refill to get them to set. I know recipe on Jello box asks for boiling water, any suggestions? The ingredients rock the high - thanks NS
🔥🔥🔥💥💥💣💣💨💨🦍🦍🦍that's the good way to make gummies
Why not just use a slow cooker and let it kick it for a while…..
There are many ways to go about making gummies and using your pucks. if that's the way you would prefer than that is ok!
This recipe didn't work for me. The gummies never solidify and stay in a mush half liquid state. Even when I put them in the freezer... followed the instructions exactly so not sure what went wrong.
Eating the messy mushy result does get the desired effect though.... are potent.
Update** 10,000x easier to buy a bag of haribo gummybears, melt them down in microwave and just mix in the oil from the first beaker.
I have thought of that before. Did it actually work for you?
I nabbed the 420th like, where's my Nobel Prize?
😵
LOL it's a paraphrased Simpsons' joke.
Do these get you high or help you sleep?
Hey There, That depends on how you make them. You can make them to do different types of effects. Please watch more of our videos to help you out with this.
Idk man, 1000mg for me is a baseline serving
I like coconut.oil better
Hell yeah I have already made some ⛽⛽⛽ edibles of this press!!🤙🤘
Now the question is can you smoke the pucks after you press them my son says no he says that the fibers from the micron bags get stuck in the plant matter and you end up smoking micron!!! Can't be healthy to smoke it so I will be trying this method thanks guys!!!
Hey there! You cannot smoke the actually pucks but we do have a process where they can soak in MCT oil or cocount oil and you can use that as a tincture or whatever your heart desires 😉 Check out this video
th-cam.com/video/X5tMiybynP4/w-d-xo.html
holy shit
Stopped viewing when you added that crap gelatine
Jàlelouiià🦝 🍁🍂
Really dont think this was the best way you could have done it. you probably lost just as much as "extracted"... I WOULD HAVE soaked it in 99% iso over nite than put in a cheese cloth and a vice nd squished till it was NO MORE coming out... and you would have done Way better... evaporate and than mix with your oil... Than heat it for decarb.. IN MY OPINION, of course... 🤔
What the hell is a puck ? and where do I find them ?
Hey there, a puck is one of our bags with smashed material in it that you repurpose to get everything out of your bags!