Nice rig ! I was gifted a large electric motor in the late 80’s and installed it on a little aluminum 12’. It has provided that many years of trouble free pleasure , and still does. Easy to store, and we know most damage happens with improper storage of gas motors. I hope you vid enlightens more people to how simple electric install and operate,and just superior for a small boat application. Really love your boat.
love to see how we can repurpose a vintage boat and create electric motor conversions. This is a huge market for both commercial and DIY mariners. Kudos for this project and your video. Inspires the Green Boating Community ~tgb
Although I’m a vintage outboard fan I’ve also mused about converting one to electric. That’s a nice, clean job and a gorgeous restoration of a classic runabout.
Reminds me of a really well made model boat (maybe 12” long) with a battery operated Johnson outboard I had as a kid in the late 50’s. Think mine was faster though😅. Put 3 or 4 folks in that thing on a breezy lake and enjoy🤣…
The Sea Ray is beautiful. I'm curious to learn more about range and performance on a combination like this. While I don't need to pull a skier, it's important to me to have enough power to get up on plane or power through chop or current. Not sure this ticks all the boxes just yet. I like the way the technology is going, and appreciate your sympathetic updates to a classic boat.
Thank you. I'm still learning about my electric conversion. At full throttle she goes about 4 knots. I installed the Pod Drive 1.0 Evo. It's range is about hour 1.5 on a charge at full throttle, 4-5 hours a half throttle. There is a more powerful pod the 6.0 Evo which equates to about 3 time more power. As I continue to experiment, I may replace my 1.0 with the 6.0 ( and then put the 1.0 in my sailboat) For now I'm pretty please with the speed as it about the same as with the worn up 2 cycle (had very low compression never enough to plane) Here is a link so you can learn more. www.epropulsion.com/pod-drive/
Those Epropulsion motors are great. A couple of guys in my sail clube have those (At the body of water where Imhabe my boat no combustion engines are allowed and electrical motors only for getting in and out of the slip and in case of emergency). No noise no smell and enough power. This is a nice project. 👍
Bob, if you get water in your boat it will go to the back right where you have mounted all your electrical. I would suggest that you make a raised platform so if water gets back there your wires will be above it and you won't short out your system.
Awesome restoration and conversion! Very nicely done! The only thing I would have done differently is, rather than taking the battery out of the boat to charge it, I would have installed the charger in the boat and installed a waterproof NEMA 5-15 shore power plug in the transom to allow you to simply connect an extension cord to charge the battery. Thanks for sharing this with us!
I can cruise for 4 hours. That full throttle about 1.5 hours. The equipment needed cost around $2500. I used the EVO 1kW model. They also have a 3kW model and a 6kW model. I may upgrade to the 9kW for more power.
Great conversion to save the look of the old motor and nice machining on the aluminum plate. I noticed that you mounted the electrical switches and connections on the deck in the stern compartment. I think you'll inevitably get water in the bottom of the boat which could cause corrosion or a short circuit. Maybe better to mount them higher off the deck on the transom or sides
You just created the quietest Johnson 40HP in the world. Of course you sacrifised a lot of speed to do it. But then again, speed isn't everything for a Sunday afternoon cruise. well done Bob. Take care and have a great day. Stay safe on the waterways.🙂🙂
I admire the quality of your workmanship always a pleasure to see how you go about things. would have loved to see a shot of the boat moving at full throttle, just saying.
Very Clever Idea and Implementation! I would recomend you put the electronics and switch at a higher point or in a watertight container, despite the low voltage and that you're not running it in salt water
Really beautiful boat, Bob! Fantastic work restoring her! 😃 Personally, I'd want a little more speed... But not that much more, at all! The best part is that if you ever need, you have more than space enough to put a huge battery there! 😃 Anyway, stay safe there with your family! 🖖😊
Such a great project to watch, and start to finish in one episode too. Quite and clean marine fun. Great to see that these options are available as a conversion kit.
That is soooo cool!!! Nice vintage boat in which to putt around. Do you think you will add more battery in the future to go faster? You’ve done the hard work already. New battery has cost, but your work effort seems like it wouldn’t be much. Thanks for sharing!
Bob, I found your channel about 1/4 of the way through the Victoria build. I have just watched your whole series you have so far for the Haven. I have been really enjoying every episode and can’t wait to see it in the water.
great Job Mr Emser. I just wish you had more time to show more content, I am sure you could find enough to have a weekly video instead of fortnightly. Really good to see you overcoming and changing the design without changing the look of original features. 👍
Thanks Howard, I do wish I could do weekly posts. As most of you know I'm a one man band. I do all of the preplanning, camera work, and editing. Unfortunately just not enough of me to produce weekly. It's my hope to hire an editor once ad revenue and Patreon funding increase. I am thinking of doing a Live video of behind the scene material that would come out on the off weekends. Do think that is something viewers would enjoy? Love to hear you thoughts. Thanks for the nice comment and watching! Bob
That is a very slick conversion kit. I was thinking you might have left the battery set up in the engine cowl but install the charging system to allow you to attach it to shore power or your home power when it was at a marina or on the trailer. Your set up is simpler and easier.
Bob, this was an interesting, and entertaining video. I love your channel and have watched and enjoyed all your videos. I know that it is probably more of a personal preference, but I hated to see a beautiful piece of vintage machinery dismantled and thrown on the ground, when it could have been brought back to use with some repair. When the video began, I had visions of an ending scene of the boat quietly pulling a skier across the lake, but it looks like you were aiming for a relaxing slow cruise.
Thank you Bob for this timely video. Very nice transition from gasoline to electric. It may not be able to come up on plane and pull a water skier but like you said, it is great for nice and quiet cruising.
That came apart way easier than any of the ones I have pulled apart. In the early 60's they switched to a different looking fuel pump that was actuated by the pressure changes in the crank case and all the ones I've had worked pretty good. But if your reed valves are not seating good than it would be problematic. That being said, electric conversion really is a great option for getting rid of that old 2 stroke engine.
Bob, you have managed to cross into other genres by adding the electrics and fiberglass hull. This would seem to be the wave of the future for pleasure boating. You have an increased number of views as a result!
Bob, Cool project. FWIW, I would not mount those electrical components on the deck where any water, headed to the drain, could hit them. Better to mount on bulkhead.
Thank you so much it is a fun little boat. ePropulsion does offer a 100kW inboard motor. I'm planning on my next boat to have inboard power. I thinking is that this was a good test of the electric power. I will go 10 knots at full power. Perfect for what I wanted in this small boat. Thanks for watching!
Great project! I didn't see that coming. The boat is beautiful. I don't know how you had the guts to drill holes for the throttle and display - I wouldn't have been able to do that. Generally I like the idea of vintage meets modern, but one has to be able to let go of just preserving things.
If you built a nice flat bottom where the original gas motor mounted you could use that area for storage, a cooler could fit under the motor cover nicely 😉
Did you ever consider marrying up a larger electric motor with the original outboard gearbox? There seems to be a few people on TH-cam trying that now.
That is what I first thought of. In researching it I found that a lot of power is lost in the turning of the gears. Epropulsion does make a motor that could do that ,however, it is designed for inboard propulsion and does not involve a gearbox. One of the beauties of an electric motor, easily reversible. Thanks for watching
I'm sure it must be slow with only 1kw and a planing hull, but what is the battery capacity and how long can it run? Does the prop get jammed by vegetation? Conversion looks a lot easier than a 13' sit inside kayak I converted using a Minn Kota 30 (360W). A lot of fabricating and thinking as I had to convert it to a full remote throttle, shift, and motor lift lever since there was no way to reach the tiller unless I extended it several feet and it would have been very awkward to operate to say the least, plus I wanted to add a PWM for full throttle control instead of steps and better efficiency. Hits hull speed at 1/2-3/4 throttle and the battery outlasts my attention span, but of course, that's a displacement hull. Biggest problem is picking up weeds and such-I have to lift the motor and reach back with the paddle to knock the stuff of the prop.
It hurt to watch that old Johnson outboard being gutted. The solution to your fuel flow problem seemed straightforward enough. What made you decide to scrap it? (Was it the ecology of the oil burning issue or did it have other reliability problems?)
I'm curious of the weight differences. The old motor/gas tank (when full) vs the new electric solution with one battery. Did taking all the weight out of the back affect the balance of the boat? I would think that the design would have been made with a heavy outboard hanging off the back in mind. Nice thing is you can have a second battery on board and swap out if needed.
Neat break from the Haven. Buy a trailer. Get a boat. Not bad. You pressure-washed, but it didn’t look like you had to deal with the gobs of low-tide grease from the case. Also a question: that area in front of the transom where you put the battery and control units used to get very wet even with the drain (which had a habit of clogging). Especially if the boat was left out in the rain. I assume that wouldn’t be a problem. Glad you kept the vintage look of the Johnson 40.
@@paulschena8493 I get it. The conversion challenge was more rewarding than somewhat noisy, smelly speed. The older I get the more I value quietness. But your priorities are okay too.
It's when you see the absolutely ludicrous difference in size between the electric motor and the gas one, plus the complexity of maintaining & repairing it, plus the noise and stink that electric makes so much sense. Range and the need to for batteries is the tradeoff. The ideal solution would be to mount sufficient solar that the motor can essentially run at low speeds forever in daylight, and enough battery to allow the boat to run faster for shorter durations.
It only makes sense if you're willing to give up all your speed. It went from 40hp to 1hp. A 40hp motor and enough batteries to match the range of the old gas tank would be an entirely different beast. He's turned a wonderful little runabout into a marina toy. That's fine if that's all he wanted, but I'd think you could get in actual danger taking that thing out where currents could overpower the motor.
Not against electric, couldn’t you find an engine that was scraped because of a frozen power head, but the lower unit was still good? That being said, good job on your conversion!
I saw the vintage boat picture on the trailer that needed work, the sales brochure, and then my jaw dropped when I saw your restoration. That's dog gone beautiful work Bob. The electric motor addition was pretty clever. Have you considered remounting the battery and components on a little shelf in case a lot of water were to get inside the boat? Thanks for sharing another great episode of TAOBB.
Finally someone that just shows imperial and metric on screen without making a fuss about it. Thank you!
My pleasure. Thanks for your comment never sure how helpful they are.
Cheers,
Bob
Keeping the case was the right call; looks great!
Thanks very much. Your quiet “Johnson “ outboard will get many perplexing looks from fellow boaters. I enjoy your videos.
Nice rig ! I was gifted a large electric motor in the late 80’s and installed it on a little aluminum 12’. It has provided that many years of trouble free pleasure , and still does. Easy to store, and we know most damage happens with improper storage of gas motors.
I hope you vid enlightens more people to how simple electric install and operate,and just superior for a small boat application.
Really love your boat.
I sure did, it was very interesting for sure, in the future I might do that with my 15 HP outboard on my sailboat thank you. Love it!
A very quiet and peaceful way to enjoy the cruise, wonderful conversion kit and very sympathetically done too
thats a really smooth kind of a conversion, really enjoyed watching, thumbs up
love to see how we can repurpose a vintage boat and create electric motor conversions. This is a huge market for both commercial and DIY mariners. Kudos for this project and your video. Inspires the Green Boating Community ~tgb
That's such an awesome little boat! Congratulations!
What a fun project! And I love the old cruiser boat!
Although I’m a vintage outboard fan I’ve also mused about converting one to electric. That’s a nice, clean job and a gorgeous restoration of a classic runabout.
Reminds me of a really well made model boat (maybe 12” long) with a battery operated Johnson outboard I had as a kid in the late 50’s. Think mine was faster though😅. Put 3 or 4 folks in that thing on a breezy lake and enjoy🤣…
Perfect for sneaking up on some fish while boating in style I love it
Great project Bob! There’s nothing more enjoyable than a quiet early evening cruise around the lake.
Indeed!
That is a slick and very classy boat!
That's so awesome, great video for sure. love it.
Glad you enjoyed it
LOVELY JOB, SO ORIGINAL, WELL DONE
Thats a beautiful Boat Bob, and a really neat job too. I think one of the benefits of electrical power is it is clean, and quiet too.
I am always impressed with how accurate your templates and fittings are Great job
Love the crickets in the background
Great video Bob, lovely that you can keep the original look of the boat while ditching the stinky motor!
The Sea Ray is beautiful. I'm curious to learn more about range and performance on a combination like this. While I don't need to pull a skier, it's important to me to have enough power to get up on plane or power through chop or current. Not sure this ticks all the boxes just yet. I like the way the technology is going, and appreciate your sympathetic updates to a classic boat.
Thank you. I'm still learning about my electric conversion. At full throttle she goes about 4 knots. I installed the Pod Drive 1.0 Evo. It's range is about hour 1.5 on a charge at full throttle, 4-5 hours a half throttle. There is a more powerful pod the 6.0 Evo which equates to about 3 time more power. As I continue to experiment, I may replace my 1.0 with the 6.0 ( and then put the 1.0 in my sailboat) For now I'm pretty please with the speed as it about the same as with the worn up 2 cycle (had very low compression never enough to plane)
Here is a link so you can learn more.
www.epropulsion.com/pod-drive/
Those Epropulsion motors are great. A couple of guys in my sail clube have those (At the body of water where Imhabe my boat no combustion engines are allowed and electrical motors only for getting in and out of the slip and in case of emergency). No noise no smell and enough power.
This is a nice project. 👍
Bob, if you get water in your boat it will go to the back right where you have mounted all your electrical. I would suggest that you make a raised platform so if water gets back there your wires will be above it and you won't short out your system.
There is a drain port in the aft locker. I believe it can be seen in the video.
Thanks for watching!
@@TheArtofBoatBuilding nice, and well done on restoring her. She turned out beautifully.
Awesome restoration and conversion! Very nicely done!
The only thing I would have done differently is, rather than taking the battery out of the boat to charge it, I would have installed the charger in the boat and installed a waterproof NEMA 5-15 shore power plug in the transom to allow you to simply connect an extension cord to charge the battery.
Thanks for sharing this with us!
What a neat conversion! You've retained the look but now have the better system!
@@DustinKeating-yk3vqmany recreational boaters aren’t going out for long or far, and these electrics can work well in those environments.
💯 🎉 cool modernization of a classic.
Such a gorgeous boat! Your restoration is lovely, and I love that you've converted it to electric. Very neat and clever refit and installation!
Excellent workmanship! Question: how long/far can you cruise on your boat with that battery? And approx how much did the conversion cost? Thank you
I can cruise for 4 hours. That full throttle about 1.5 hours. The equipment needed cost around $2500. I used the EVO 1kW model. They also have a 3kW model and a 6kW model. I may upgrade to the 9kW for more power.
Absolutely love this project. Moving propulsion into the 21st century without sacrificing the beauty of the mid-20th century aesthetics. 👍👍👍👍
I can't wait to see the Haven again! This was a cool retrofit.
Great conversion to save the look of the old motor and nice machining on the aluminum plate. I noticed that you mounted the electrical switches and connections on the deck in the stern compartment. I think you'll inevitably get water in the bottom of the boat which could cause corrosion or a short circuit. Maybe better to mount them higher off the deck on the transom or sides
When I saw that I thought the same thing. Great job though with the project.
Even a vertical board, mounted to one side of the transom might work ok.
You just created the quietest Johnson 40HP in the world. Of course you sacrifised a lot of speed to do it. But then again, speed isn't everything for a Sunday afternoon cruise. well done Bob. Take care and have a great day. Stay safe on the waterways.🙂🙂
Love the conversion but that Johnson is in wonderful condition. I'm hoping you sold the parts as someone would love to get their hands on that stuff.
That is an amazing restoration Bob. The conversion to electric propulsion is fantastic!!!!!
That was such a fun project! And the end result is fun, ecologically balanced, and just quiet! Love it!
Nice work, you look like you really know your stuff. It must be a whole lot nicer to ride in with the nearly silent motor
Great job Bob, I love these projects!
Nice presentation!
I admire the quality of your workmanship always a pleasure to see how you go about things. would have loved to see a shot of the boat moving at full throttle, just saying.
Very Clever Idea and Implementation! I would recomend you put the electronics and switch at a higher point or in a watertight container, despite the low voltage and that you're not running it in salt water
What a clever disguise! Beautiful work, as always.
Really beautiful boat, Bob! Fantastic work restoring her! 😃
Personally, I'd want a little more speed... But not that much more, at all! The best part is that if you ever need, you have more than space enough to put a huge battery there! 😃
Anyway, stay safe there with your family! 🖖😊
Great job
Awesome job 👌
Such a great project to watch, and start to finish in one episode too.
Quite and clean marine fun. Great to see that these options are available as a conversion kit.
Bob as always, you are an amazing craftsman and artisan.
That is soooo cool!!! Nice vintage boat in which to putt around. Do you think you will add more battery in the future to go faster? You’ve done the hard work already. New battery has cost, but your work effort seems like it wouldn’t be much. Thanks for sharing!
Awesome project! Thanks for sharing
Bob, I found your channel about 1/4 of the way through the Victoria build. I have just watched your whole series you have so far for the Haven. I have been really enjoying every episode and can’t wait to see it in the water.
Awesome, thank you!
great Job Mr Emser. I just wish you had more time to show more content, I am sure you could find enough to have a weekly video instead of fortnightly. Really good to see you overcoming and changing the design without changing the look of original features.
👍
Thanks Howard,
I do wish I could do weekly posts. As most of you know I'm a one man band. I do all of the preplanning, camera work, and editing. Unfortunately just not enough of me to produce weekly. It's my hope to hire an editor once ad revenue and Patreon funding increase.
I am thinking of doing a Live video of behind the scene material that would come out on the off weekends.
Do think that is something viewers would enjoy? Love to hear you thoughts.
Thanks for the nice comment and watching!
Bob
That is a very slick conversion kit. I was thinking you might have left the battery set up in the engine cowl but install the charging system to allow you to attach it to shore power or your home power when it was at a marina or on the trailer. Your set up is simpler and easier.
100% agree with leaving the battery under the original cowl unless theft of the battery unit is of a concern.
This is fascinating, what a great project!
Bob, this was an interesting, and entertaining video. I love your channel and have watched and enjoyed all your videos. I know that it is probably more of a personal preference, but I hated to see a beautiful piece of vintage machinery dismantled and thrown on the ground, when it could have been brought back to use with some repair. When the video began, I had visions of an ending scene of the boat quietly pulling a skier across the lake, but it looks like you were aiming for a relaxing slow cruise.
Thank you Bob for this timely video. Very nice transition from gasoline to electric. It may not be able to come up on plane and pull a water skier but like you said, it is great for nice and quiet cruising.
awesome skill looks cool.
Great video as usual, really a pretty straight forward process
Hi Alex, I added you to my blog. I hope you enjoy it.
That came apart way easier than any of the ones I have pulled apart. In the early 60's they switched to a different looking fuel pump that was actuated by the pressure changes in the crank case and all the ones I've had worked pretty good. But if your reed valves are not seating good than it would be problematic. That being said, electric conversion really is a great option for getting rid of that old 2 stroke engine.
Someone might be interested in the Johnson's internals as spares?
@@davidyendoll5903 I'm sure someone out there wants them, but I have a 40hp Evenrude I can't even give away locally.
Bob, you have managed to cross into other genres by adding the electrics and fiberglass hull. This would seem to be the wave of the future for pleasure boating. You have an increased number of views as a result!
Very cool... I like it!!
Bob, Cool project. FWIW, I would not mount those electrical components on the deck where any water, headed to the drain, could hit them. Better to mount on bulkhead.
thank you very informative
You definitely have plenty of room to add a few extra batteries.. really interesting project.. thank you
You bet
Question: can you parallel additional batteries on the terminal board to increase run time?🤔
A nice conversion! I am considering doing this to my 69 Silverline Swift with an 69 Evinrude Ski Twin 33 hp motor. I want to have more hp though.
What a pretty little boat and what a neat conversion. Maybe one day ePropulsion will offer a 30kw version to match the old 40hp.
Thank you so much it is a fun little boat. ePropulsion does offer a 100kW inboard motor. I'm planning on my next boat to have inboard power. I thinking is that this was a good test of the electric power. I will go 10 knots at full power. Perfect for what I wanted in this small boat.
Thanks for watching!
You didn't rig it to use the vintage throttle control 😞
Great project! I didn't see that coming. The boat is beautiful. I don't know how you had the guts to drill holes for the throttle and display - I wouldn't have been able to do that. Generally I like the idea of vintage meets modern, but one has to be able to let go of just preserving things.
I am looking at the clock in the garage and I can't understand what time is it,,,,,,,,,,,,,,,,,,,,,,,,,, and that is thermometer. ..
looks good ,but need more power
That a great idea for cruising around and keeping the classic look.
I wonder if I could convert one of my old British Seagull engines to electric? 🤔😎
Once again, well done, Bob! What’s the new horsepower of the electric motor?
3 hp. At full throttle she should go 10 knots for 1.5 hours. At about half throttle (4-5 knots) she can cruse for about 4.5 hours
If you built a nice flat bottom where the original gas motor mounted you could use that area for storage, a cooler could fit under the motor cover nicely 😉
Your thinking of a kegerator ain't ya ? 🤣
Not a bad idea ?? Lol
Did you ever consider marrying up a larger electric motor with the original outboard gearbox? There seems to be a few people on TH-cam trying that now.
That is what I first thought of. In researching it I found that a lot of power is lost in the turning of the gears. Epropulsion does make a motor that could do that ,however, it is designed for inboard propulsion and does not involve a gearbox. One of the beauties of an electric motor, easily reversible.
Thanks for watching
Bob, what HP was the original motor? And what HP electric did you replace it with?
I'm sure it must be slow with only 1kw and a planing hull, but what is the battery capacity and how long can it run? Does the prop get jammed by vegetation? Conversion looks a lot easier than a 13' sit inside kayak I converted using a Minn Kota 30 (360W). A lot of fabricating and thinking as I had to convert it to a full remote throttle, shift, and motor lift lever since there was no way to reach the tiller unless I extended it several feet and it would have been very awkward to operate to say the least, plus I wanted to add a PWM for full throttle control instead of steps and better efficiency. Hits hull speed at 1/2-3/4 throttle and the battery outlasts my attention span, but of course, that's a displacement hull. Biggest problem is picking up weeds and such-I have to lift the motor and reach back with the paddle to knock the stuff of the prop.
Too bad they don't make a setup that can match the old 40 horse for performance.
make the motor housing into an ice chest?
What are the specs on the motor ?
What is the top speed on it?
Around 4 knots
@@TheArtofBoatBuilding thank you.👍
It hurt to watch that old Johnson outboard being gutted. The solution to your fuel flow problem seemed straightforward enough. What made you decide to scrap it? (Was it the ecology of the oil burning issue or did it have other reliability problems?)
Surely that was a vacuum/crank case pulse powered fuel pump, not driven by a cam?
Hi my friend ,How much does all this modification cost? Thanks
Not sure I'd have screwed all those components to the floor at the back, right in front of the drain hole for any water that is shipped inboard.
I'm curious of the weight differences. The old motor/gas tank (when full) vs the new electric solution with one battery. Did taking all the weight out of the back affect the balance of the boat? I would think that the design would have been made with a heavy outboard hanging off the back in mind. Nice thing is you can have a second battery on board and swap out if needed.
Needs a smoke generator.....
I really like this!
As always, an enjoyable episode watching a master craftsman. Excellent the way you retained the old Johnson motor case and retained that vintage look!
Neat break from the Haven. Buy a trailer. Get a boat. Not bad. You pressure-washed, but it didn’t look like you had to deal with the gobs of low-tide grease from the case. Also a question: that area in front of the transom where you put the battery and control units used to get very wet even with the drain (which had a habit of clogging). Especially if the boat was left out in the rain. I assume that wouldn’t be a problem. Glad you kept the vintage look of the Johnson 40.
A runabout to a putter-round with room for beer cooler ballast in the empty engine head. 😂❤
Maybe a post-cruise cooler underneath the cowling now that the battery is not there :)
I gotta say, that battery looks microscopic. What's the range?
So you are downgrading the boat from 40 hp to 2, maybe 3 hp?
Yea, I don’t get it at all.
@@paulschena8493 I get it. The conversion challenge was more rewarding than somewhat noisy, smelly speed. The older I get the more I value quietness. But your priorities are okay too.
The EPropulsion site shows that as a 1hp motor. Their most powerful motor in that pod form is 9hp.
Did you have a hard time getting yourself to cut the holes in the dash ? I did ..I had to have someone else start the cutting process ..
Da pra passar nadando do lado
1 small solar panel would be nice to keep charging
Indeed, I’ll have to look into that.
Converting it back is cooler.
I like how you unceremoniously dumped the old 2 stroke on to the gravel
It's when you see the absolutely ludicrous difference in size between the electric motor and the gas one, plus the complexity of maintaining & repairing it, plus the noise and stink that electric makes so much sense. Range and the need to for batteries is the tradeoff. The ideal solution would be to mount sufficient solar that the motor can essentially run at low speeds forever in daylight, and enough battery to allow the boat to run faster for shorter durations.
It only makes sense if you're willing to give up all your speed. It went from 40hp to 1hp. A 40hp motor and enough batteries to match the range of the old gas tank would be an entirely different beast. He's turned a wonderful little runabout into a marina toy. That's fine if that's all he wanted, but I'd think you could get in actual danger taking that thing out where currents could overpower the motor.
Not against electric, couldn’t you find an engine that was scraped because of a frozen power head, but the lower unit was still good? That being said, good job on your conversion!
I saw the vintage boat picture on the trailer that needed work, the sales brochure, and then my jaw dropped when I saw your restoration. That's dog gone beautiful work Bob. The electric motor addition was pretty clever. Have you considered remounting the battery and components on a little shelf in case a lot of water were to get inside the boat? Thanks for sharing another great episode of TAOBB.
👏👏👏👏👏