i hope all the other YT restore channels pay attention. this is a real restoration of a practical item/tool. great job !!! what is the name and type of that yellow grease ?
Got you. Switch was off when you did the function test in the beginning. Just compare beginning with the function test with the batteries at 15:54. Switch "sticking out at the bottom", so off. I would actually prefer if you didn't do the initial "function test" at all. It doesn't have to be broken if you prefer having it cordless...
Я вначале подумал, что это у тебя аккомуляторный перфоратор!-, но после сборки стало всё понятно!-, молодец!-, отличная получилась работа!-, дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения 👍👍👍🤝🇷🇺👈🤓🦾!!!
@@gear_show Here in Portugal they don't sell when they go for recycling, we have nowhere to buy them, only new ones, you've done a good and great job, a big hug, all the best in your life..
Öncelikle bu görsel şölenleri bize sunduğun için çok teşekkür ederim.🙏 Bazı fikirler aklıma geldiğinde sunmak istiyorum stator için 3d printer kullanarak yaptığın kasayı şapkalı yapmış olsaydın rotor için daha güzel bir soğutma sağlardı diye düşündüm. 🤔Sabitlemeler çok güzel yine de. Türkiye den selamlar 🤘
your videos are awesome . about the dc motor you have installed with the 3D printed housing "IF" the motor get heat up wouldn't the 3D printed housing melt ?
Só substituiu o campo magnético elétrico por um imã permanente, porque não rebobinou o induzido para 36v? Assim vai haver muita perca de potência! Mas ficou bom trabalho!
Отреставрировали хорошо. Но ставлю антилайк за то что ты его после реставрации угробил переделав на аккамуляторы. Его надо было оставить как и был с двигателем работающим от сети
Haha, I have one chainsaw missing spare parts, I want to convert it into battery chainsaw too. I'm learning about it. I hope I can do it successfully in the future. thank you!
For a reciprocating saw it has a very long stroke. It cut the boards really quickly. It will be a beast after rewinding
Yes, I hope so, thanks for sharing!
Now that's a neat transformation and a very usable saw.
It will be usable after rewinding new armature.
GREAT RESTORATION
Thank you!
Armature rewind videos are my favorite, really nice job Mr
i hope all the other YT restore channels pay attention. this is a real restoration of a practical item/tool.
great job !!! what is the name and type of that yellow grease ?
Thank you very much! It is power tool gearbox grease.
Very good idea for this old tool in Asian area
Yes, thanks
Hi mister beautiful restoration good job well done
Thank you very much!
Got you. Switch was off when you did the function test in the beginning. Just compare beginning with the function test with the batteries at 15:54. Switch "sticking out at the bottom", so off.
I would actually prefer if you didn't do the initial "function test" at all. It doesn't have to be broken if you prefer having it cordless...
Depend on the user manual, this switch is used to for high and low speed. I also turn this switch too before firming.
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
Thanks, you too!
Wonderful this restoration, bro... Be safe🇷🇴
🇮🇩 kamu bisa gak restoration
Thanks, you too!
@@gear_show dapat mesin rusak dari mana saja
Я вначале подумал, что это у тебя аккомуляторный перфоратор!-, но после сборки стало всё понятно!-, молодец!-, отличная получилась работа!-, дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения 👍👍👍🤝🇷🇺👈🤓🦾!!!
always impressive
Thank you!
you restored it like a champion 🏆. btw i love your video. you give me a inspiration to do it too 👍🔥
A-ha! To be continued. So we get to see you whack a turbo on it 😁. Great stuff Mr. Gear Show 👏👏👏. Thank you so far 🙏. 😎
What a creative you are. I have subscribed to your channel, worth following
Thanks for subbing!
Nice restoration 👍👍
Glad you like it
thank you teacher❤❤❤
Great job, thank you brother. You are so talented
Brilliant restoration🎉
Many thanks!
@@gear_show w
Nice conversion
Ini yg q tunggu" videonya. Saya sangat suka video klu sering muncul kyk gini..❤❤❤
Saya senang Anda menyukai video ini, terima kasih!
great paint job.
Glad you like it
Very wonderful one of the best channels I have to watch ❤
Thank you so much 😀
You should do a workshop tour.
Bro you are awesome great work thanks thanks for the sharing this video
Brilliant job Well Done.
Many thanks!
Great my friend 👍...Thank you from Iraq 🙏🙏
You're welcome, thank you!
the most strangest recip saw i have ever seen
There is only one at my workshop.
It's probably meant for cutting bulk wood or metal.
Where did you get that long phillips bit from? Its exactly what i need. Can you tell me what brand it is? Awesome video by the way!
It is bropper bits, I bought it from Chinese online shop.
Vessel also make similar ones. Klein and a few other brands too.
The Broppe ones look super elegant though, good choice Gear Show.
I like your technique
I'm glad to hear that, thank you!
What a beast! Well done👌
Good night, how are you? Where do you buy those machines that you get to make the videos, big hug..😀😀
Good morning, I'm doing fine, thank you! I bought those machines from Japan recycle shops.
@@gear_show Here in Portugal they don't sell when they go for recycling, we have nowhere to buy them, only new ones, you've done a good and great job, a big hug, all the best in your life..
Öncelikle bu görsel şölenleri bize sunduğun için çok teşekkür ederim.🙏 Bazı fikirler aklıma geldiğinde sunmak istiyorum stator için 3d printer kullanarak yaptığın kasayı şapkalı yapmış olsaydın rotor için daha güzel bir soğutma sağlardı diye düşündüm. 🤔Sabitlemeler çok güzel yine de. Türkiye den selamlar 🤘
Bu videoyu beğendiğinize sevindim, teşekkürler!
Great restoration. 👍👍
Veoma dobra restoracija
Drago mi je da ti se sviđa, hvala!
your videos are awesome . about the dc motor you have installed with the 3D printed housing "IF" the motor get heat up wouldn't the 3D printed housing melt ?
The permanent magnet never got heat, only the armature get heat while running.
Я иногда тоже ремонтирую инструменты.
Вот только снимать забываю.
Все классно .
Особенно переделка на аккумуляторы.
Спасибо, что поделились!
Very nice.
I was kind of waiting for you to replace the motor with some kind of DC motor... But you didn't....
Part 2???
Yep .. how a 220v motor can work with batteries ?
I'm waiting for next part...
I can't imagine how you make the video, I think you recorded, edited, and etc by your self, this why to upload one new video you need more time 👍👍👍
Yes, you're right.
Золотые руки, отличная работа, 💪🏻🔥
Я рада, что вам понравилось, Спасибо!
Yeeee yeeee yeeee
Só substituiu o campo magnético elétrico por um imã permanente, porque não rebobinou o induzido para 36v? Assim vai haver muita perca de potência! Mas ficou bom trabalho!
O rebobinamento da armadura estará no próximo vídeo.
Как всегда лайк. Хорошая работа. Как всегда смотрю с большим интересом.
Скажите вы якорь не перематывали?
И наверное инструмент был на 110 вольт?
Якорь родной 110 вольт, я просто заменил обмотку полем на постоянный магнит и применил источник постоянного тока 40В от 2-х батарей по 20В.
Спасибо за ответ.
Làm video show không gian làm việc đi bạn ơi, tôi bị mê mẩn cái không gian như thế ❤
Nó rất lộn xộn trong không gian làm việc của tôi.
belo trabalho de restauraçao , muito bom
Fico feliz que tenha gostado, obrigada!
Was the old windings burnt? I think that was totally savable to it's original state. Anyway, great content.
The old winding won't burn. The only one problem is speed.
Awesome video :D
Thx for it
Лучший спасибо за потраченное время!!!
Пожалуйста!
Una buena forma de convertir las carcasas conductivas a DC....🙏🙏🙏🙏
¡Sí, gracias por apoyar esta idea!
name of your phillips screwdriver bit?
It is broppe phillips screwdriver bit.
Show de bola parabéns 👏👏👏👏💯👍👍🇧🇷🇧🇷
Obrigado!
can be used for different purposes 😉
Yes, maybe.
Отлично, это какая-то раритетная сабельная пила
Costa Rica!!!!
Welcome here
here!
Yes
It’s perfect
Show 👏🏻👏🏻👏🏻
✌
3d printer 👍👍👍👍
Thank you!
This has already happened, a repeat of the video!
I would make braces for this, it can be heavy. :)
Yes, you're right, that is great idea.
teşekkürler elinize sağlık
the white swich is turend off at the start so it would not turn on .
That’s a lotttt of screws and parts 😂
Yes, you're right :)
@@gear_show haha but still a smooth and easy restore for you I guess…can’t wait for the part 2 😍
👍💯
Thank you!
روتر موتور به سیم پیچی مجدد احتیاج نداشت؟
Rewinding armature here th-cam.com/video/6y9kZ1N5wEw/w-d-xo.html
Why did you don't show the winding
This is the original armature. The next video will be rewinding.
Ok waiting for your next video
😂😂Very Good
Thank you!
@@gear_showsir I have also created a channel, give me some tips too
When my video is not seen by many people, then my heart does not want to make a video
Lol that’s a chalk punch
Wind a armature all in one used 😢 please
Winding armature will make this video too long.
А пачему автар малчит?
Сабельная пила модели "Чебурашка". Выглядит ужасно, но работает.
👍😎🍺🍩🛠️🗜️
6:46 Чебугена
Отреставрировали хорошо. Но ставлю антилайк за то что ты его после реставрации угробил переделав на аккамуляторы. Его надо было оставить как и был с двигателем работающим от сети
Couldn't help but think the plywood cost as much as the conversion probably
The has already happened , repeat of the video!
Show
✌
Anh có phải là việt nam ko nếu thì cho địa lận em gửi vài con máy nội địa nhật nhờ anh phục hồi giúp em
Hello
Please restation hitachi ph-65
Tnx
Not available, I will do it after I found it.
Seriously, it's ok to transform and make portable but sometime it's just a no sens, what is the weight of this "thing" and the
practicality?
Sir please please gesoline chainsaw to electric chainsaw conversation
Haha, I have one chainsaw missing spare parts, I want to convert it into battery chainsaw too. I'm learning about it. I hope I can do it successfully in the future. thank you!
@@gear_show thank you so much gear show for replying
ខ្ញុំទន្ទឹងរង់ចាំផ្នែកបន្ទាប់។
ខ្ញុំនឹងព្យាយាមដាក់ផ្នែកបន្ទាប់ឆាប់ៗ
Hello
Hello
Am I the only one who thinks it's a shame to see these tools destructively modified instead of restored?
I personaly like upgraded tools. Why just restore when you can impove?
Yes
Gasoline and wire brush... Spark and bye bye
This is a fake restoration.
You put Acid on metal.
There is Acid corrosion on the metal.
Still machine is in good condition
i dont think its a saw
probably carpet stripper
Boring, do something newer 🙂😎
okay, thank you!
Stickers are better quality then paint job lmaooo
You was having hard time removing it
I will make new sticker after rewinding the armature done.
Rafsan Ayash mro ❤❤❤🇧🇩🇧🇩🇧🇩🇧🇩👔👖🧤🩲🎹🎤🎧📷