This is brilliant! I've lost the charger for mine, and if I remember it was quite a big heavy thing, so this USB-C mod is perfect. Will have to give it a try. Thanks! (Edit: Also love the carbon fiber trim!)
You can use a phone charger instead. I found my ixo on the street so it didn't come with a charger :) My ixo is from 2015 and for the 4 years I have had it I have used it every day at work.
It's a nice little screwdriver, bought it new when it came out. The base is triangular, containing the PSU and 2 contacts to charge the cell. I know now what's inside, for when I need to replace the cell. Mine's nowhere as used as this one, so hope to get many more years out of it
Бош, а якість як у ноу нейм. У мене старенький еінхель на сталевих шестернях з поворотною ручкою з регулятором зусилля з фіксатором біти, з підсвіткою і вихідний вал на підшипнику😅
Best not to use abrasives for cleaning contacts. Regular paper or paper card soaked in contact cleaner is safe. Contacts can have a very thin coating that sands off immediatly. Learnt from xraytonyb.
Beste wensen kerel.Kan je de batterij vervangen door een met een hogere capaciteit Mah? Doe zo verder. deze video's vind ik zeer interesant! Groeten vanuit belgie.
Very nice job with the charging port. It looks a bit crappy with the carbon fiber and the glossy finish... but considering that is just a tool... I guess that it works fine anyway.
Не совсем понял с зарядкой, на выходе модуля 7в. Не многовато будет. Или там какая то своеобразная родная зарядка
4 หลายเดือนก่อน +1
A restauração ficou legal mas esse tipo de parafusadeira não serve para esse tipo de serviço (14:03), o motor superaquece e a bateria não aguenta a corrente que o motor exige para esse tipo de esforço, é por isso que se vê muitas dessas ferramentas estragadas e virarem lixo por mal uso de que não sabe operar.
The classic WD40 multi-use product should never be used as contact cleaner replacement. I use a glass fiber brush to first clean the contacts and then apply PRF contact cleaner to clean and lubricate.
It ist absolute useless to restorate this old IXO, because a new one is so unexpensive. Thats the reason why i love your work, very well made. I own the same IXO an use ist nearly every day. But now i bought the last version, cause IXO 7 has 5,5Nm
Does this missile operate on 220 volts? With these specifications Angle grinder, compact angle grinder, extra-low voltage tool FINE MSf 742 0.6 KW 8500 rpm 42 V 1AC 50 Hz Grinding wheel diameter: Ø 125 mm Inner diameter: Ø 22.2 mm Spindle thread: M14 x 2.0
A few years ago, I bought a couple of basically identical drivers from the German Aldi market. When taking them apart, to put in larger battery, I was surprised to see, that the cheap one from Aldi actually used a complete set of metal gears, while the Ixo used at least partially plastic gears.
it's a shame, it's poorly made the bosh, I used a 10E, Budget screwdriver 3.6V 1x1.3Ah, which has double gears ,it has more power and rotates from 90 to 180 degrees
![พรากรัก - เต้ย อภิวัฒน์ [ Official MV ]](http://i.ytimg.com/vi/ShT2ltn8GBE/mqdefault.jpg)
I made almost half a million dollars with one of these - travelling all through north america installing server equipment :)
This is brilliant! I've lost the charger for mine, and if I remember it was quite a big heavy thing, so this USB-C mod is perfect. Will have to give it a try. Thanks! (Edit: Also love the carbon fiber trim!)
You can use a phone charger instead. I found my ixo on the street so it didn't come with a charger :) My ixo is from 2015 and for the 4 years I have had it I have used it every day at work.
This is fast be coming my favorite restoration chanel. Nice work mate.
It's a nice little screwdriver, bought it new when it came out. The base is triangular, containing the PSU and 2 contacts to charge the cell. I know now what's inside, for when I need to replace the cell. Mine's nowhere as used as this one, so hope to get many more years out of it
That was great, I have the same model that looks almost new but the battery is gone, great to see what I need to do, BTW the upgrades are very cool
Skil made an exact replica of these, I still have it and use it. Thank you for sharing your work.
Bosch was at this time owner of the Skil company!
I have the Skil replica too :)
It looks real good after renovation 😊😊
that Carbon Fiber gave it an extra 40 ft pounds of torque
Minimum…
I loved when these came out and you could only use it for 5 minutes and had to charge it for 30. 😂
LOL
Бош, а якість як у ноу нейм.
У мене старенький еінхель на сталевих шестернях з поворотною ручкою з регулятором зусилля з фіксатором біти, з підсвіткою і вихідний вал на підшипнику😅
Wishing you a very lucky and good new year
0:20 bosch helping bosch 😂😊
Good job 👍🏻💛
Fantastic and beautiful thank ✌️ 🆗️ 👍 🤗
8:50 просто сделал мой день . давно так не смеялся 🤣🤣🤣🤣
Best not to use abrasives for cleaning contacts. Regular paper or paper card soaked in contact cleaner is safe.
Contacts can have a very thin coating that sands off immediatly. Learnt from xraytonyb.
عمل متقن و رائع....واصل
Nice work
Did you change to lithium batteries, where did you get the charger from, or did you build it yourself too?
Perfect 👌
Beste wensen kerel.Kan je de batterij vervangen door een met een hogere capaciteit Mah? Doe zo verder. deze video's vind ik zeer interesant! Groeten vanuit belgie.
Very nice job with the charging port. It looks a bit crappy with the carbon fiber and the glossy finish... but considering that is just a tool... I guess that it works fine anyway.
شكرا على المعلومات المفيدة جدا
Restaurada aparafusadora sem fio 😉
1 mer video del año Happy new year 🎉
What was that makita battery?
Молодец!
Не совсем понял с зарядкой, на выходе модуля 7в. Не многовато будет. Или там какая то своеобразная родная зарядка
A restauração ficou legal mas esse tipo de parafusadeira não serve para esse tipo de serviço (14:03), o motor superaquece e a bateria não aguenta a corrente que o motor exige para esse tipo de esforço, é por isso que se vê muitas dessas ferramentas estragadas e virarem lixo por mal uso de que não sabe operar.
The classic WD40 multi-use product should never be used as contact cleaner replacement. I use a glass fiber brush to first clean the contacts and then apply PRF contact cleaner to clean and lubricate.
Actually wd40 do make a contact cleaner 😊
I have used mine for years, but the battery is failing. What is the replacement? The LI-18650 I saw was too long.
They usual use a 18650. Yours may have a protection circuit and is therefore a bit longer. A bare 18650 cell should fit.
🎖️♥️👍🏻
nomber transistor?
Класс!!!!😊
It ist absolute useless to restorate this old IXO, because a new one is so unexpensive. Thats the reason why i love your work, very well made.
I own the same IXO an use ist nearly every day. But now i bought the last version, cause IXO 7 has 5,5Nm
👏👏👏👏👏👏👏💯💯💯💯💯👍👌🇧🇷🇧🇷
INGCO BEST
Does this missile operate on 220 volts? With these specifications
Angle grinder, compact angle grinder, extra-low voltage tool
FINE
MSf 742
0.6 KW
8500 rpm
42 V 1AC
50 Hz
Grinding wheel diameter: Ø 125 mm
Inner diameter: Ø 22.2 mm
Spindle thread: M14 x 2.0
IXO 3
I will fix you brother 😅 (bosch driver helps a bosch driver)
Got no power too week now 😂
Use some proper contact cleaner, not wd40 if you love your tools 😊😊😊
Wow, that's a lot of plastic gears. I expected better from bosch.
You expected some kind of metal alloy? Well it's just for little jobs, not for heavy duties. Plastic gears actually works perfect on it.
A few years ago, I bought a couple of basically identical drivers from the German Aldi market. When taking them apart, to put in larger battery, I was surprised to see, that the cheap one from Aldi actually used a complete set of metal gears, while the Ixo used at least partially plastic gears.
Лютый ужас
horrible attempt at replacing the rubber grips unfortunately
How about you provide them for him then? Only fair.
WD40 is the wrong stuff to clean contacts. Use proper contact cleaner.
it's a shame, it's poorly made the bosh, I used a 10E, Budget screwdriver 3.6V 1x1.3Ah, which has double gears ,it has more power and rotates from 90 to 180 degrees
Ну с карбоном реально какая то херня получилась
BADUT ANCOL ADA 2 Orang sekarang ... pelawak dan stand up kenapa mau merebut kekuasaan cari cari curang kurang canggih , dana kurang
5:00 bad news... Ur solder is bad(
These ”restoration” videos get more and more ridiculous …