Very informative mate. Thanks. Level? How did you get it on , I assume four jacks ? Yep, I have never put a car all on jacks ; without at least two tyres touching the ground hard. Maybe you can show us how to do that in a new vid.
Hi mate yes you do have to put it on for Jack stands just be aware of the chassis rails this is what I attached it to you should be able to see them under the car and as long as you have a flat floor put the stands up to the same height and you're golden thanks very much for watching appreciate it good luck let me know if you have any other problems cheers Andrew
So whenever I went around a corner and put my foot down it would just rev and then once I straightened up the transmission kicked in so in other words the fluid was low enough that when you go around a corner it moves to one side of the transmission and doesn't get sucked up into the torque converter and the gear won't respond that's how I knew I was low on fluid
Hey mate my PNRD flash off and on the instrument panel then my car completely cuts out its been happening all week.. any ideas? BA ford falcon ute 2003.
You really need to change your output bush and seal this is why your trans fluid is low and why there is fluid leaking all over the back at the yolk. Looking at your dirty brown fluid I'd empty the box and do a full fluid change before your solenoids and valves get fouled. th-cam.com/video/_UEGuOQ_XkA/w-d-xo.html
Cheers man
Cheers for the video. So just topping it up til it leaks out and the car is level is safe?
And don't forget the car has to be running when you top it up
Very informative mate. Thanks. Level? How did you get it on , I assume four jacks ? Yep, I have never put a car all on jacks ; without at least two tyres touching the ground hard. Maybe you can show us how to do that in a new vid.
Hi mate yes you do have to put it on for Jack stands just be aware of the chassis rails this is what I attached it to you should be able to see them under the car and as long as you have a flat floor put the stands up to the same height and you're golden thanks very much for watching appreciate it good luck let me know if you have any other problems
cheers Andrew
“ Go around a corner the thing revs out”? Can you pls tell me what that means ?
So whenever I went around a corner and put my foot down it would just rev and then once I straightened up the transmission kicked in so in other words the fluid was low enough that when you go around a corner it moves to one side of the transmission and doesn't get sucked up into the torque converter and the gear won't respond that's how I knew I was low on fluid
Hey mate my PNRD flash off and on the instrument panel then my car completely cuts out its been happening all week.. any ideas? BA ford falcon ute 2003.
Sorry mate, I haven't seen that symptom before. get your mech to have a look
Limp mode
You really need to change your output bush and seal this is why your trans fluid is low and why there is fluid leaking all over the back at the yolk. Looking at your dirty brown fluid I'd empty the box and do a full fluid change before your solenoids and valves get fouled. th-cam.com/video/_UEGuOQ_XkA/w-d-xo.html
A 5/8 spanner is a better fit, a 16mm spanner is a tad loose.
Nice tip thanks