I have the same bike, I went back to an original Honda frontsprocket, with the rubber siderings sticked to it. Your sprocket lacks that. It will give you more chainnoise this way. But hee they are a lot cheapier that's true.
See Master what ???'I change your chain sir, I may have burn your tire and rim and maybe the swing arm too but your chain is change.'This is a real pig job!
This person was not trained properly, he wasn't taught the fact that fasteners after use take a set, because he didn't keep the fasteners in order and he uses air tools to remove fasteners which impose micro tears in the metal.which could.lead to thread fatigue. Unless you use new sprocket fasteners, each fastener has taken set to the washers and studs and should be returned to the same holes or studs removed from, plus the guy let the brake caliper hang by it's own weight, it should have been supported by wire or other means of mechanical support to avoid hose damage.What a moron, certainly wouldn't make an aviation tech with his sloppy and dangerous work..
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
I have the same bike, I went back to an original Honda frontsprocket, with the rubber siderings sticked to it. Your sprocket lacks that. It will give you more chainnoise this way. But hee they are a lot cheapier that's true.
See Master what ???'I change your chain sir, I may have burn your tire and rim and maybe the swing arm too but your chain is change.'This is a real pig job!
Lots of little metal bits in that new chain now
This person was not trained properly, he wasn't taught the fact that fasteners after use take a set, because he didn't keep the fasteners in order and he uses air tools to remove fasteners which impose micro tears in the metal.which could.lead to thread fatigue. Unless you use new sprocket fasteners, each fastener has taken set to the washers and studs and should be returned to the same holes or studs removed from, plus the guy let the brake caliper hang by it's own weight, it should have been supported by wire or other means of mechanical support to avoid hose damage.What a moron, certainly wouldn't make an aviation tech with his sloppy and dangerous work..
also, torquing the nuts around the circumference, not in a star pattern. also also, "stud heads"- its called "rivets".