I watched this video many times. You say in the video to remove the screws and give the Fender a good tug and it will come off. Is off. Not true at all. You failed to mention that you have to remove the white clips that also hold the Fender in place. As a result I had to go to the dealer and pay $5 each to replace those clis Ace those clips.
For reference, the clips are 90 cents each from most online retailers. I’m not sure why in all the install videos everyone says “just a good tug!” You can pop some needle nose back there to close the clips and they slide right out. I guess most of these folks aren’t re-using the stock fenders or just have extra clips they make work(like I did)
Just a note, on my 22 JLUR, the crash guard on the passenger side gets in the way. I had to bend the horizontal part of the rear panel up about 30° and then had to angle grind off the corner of that same part so it still cleared the body panel. A revision of the passenger rear panel is probably in order for newer model years with that new crash guard.
They just released a version with a cutout specifically for teraflex shocks. Check their website and right now they are having a 17.84% off Rocktoberfest special good on their site only. Just ordered mine!
I couldn’t get things to line up on the passenger side of my 22 jlur. It doesn’t seem that the fender is machined correctly to fit. I think it will require cutting at the top and rear. So frustrating! Friggin another $45 in stupid fender clips later, and still no fender liners
Although we have had customers install them on diesels, the majority will not work. We have a diesel compatible version that we are currently wrapping up in R&D and should be in production and available in the coming month. Thanks!
I just received them yesterday at my doorstep. I will be installing them this weekend, this video makes me really confident about doing it myself. Thank you guys.
I have rokblokz mud flaps on my Jeep, will I be able to use those if I reuse my stock fenders? Not sure what that piece was that you threw out at 4:25, I’m guessing the mudflaps don’t screw into that piece lol I know this is oddly specific but just curious if anyone else was running the same set up as me 🤣 I already ordered these inner fenders so I’m hoping for the best.
Yup, done with the install. Dont understand why a company that charges a premium doesnt include the necessary grade 8. One simple cheap bolt and they make you go buy one. Missing hardware wasn't fun either.
I watched this video many times. You say in the video to remove the screws and give the Fender a good tug and it will come off. Is off. Not true at all. You failed to mention that you have to remove the white clips that also hold the Fender in place. As a result I had to go to the dealer and pay $5 each to replace those clis Ace those clips.
For reference, the clips are 90 cents each from most online retailers. I’m not sure why in all the install videos everyone says “just a good tug!” You can pop some needle nose back there to close the clips and they slide right out.
I guess most of these folks aren’t re-using the stock fenders or just have extra clips they make work(like I did)
Sorry. I can't complete my install. Requires 10mm socket. No idea where the @#$& it is. ;)
Those 10mm sockets are always vanishing !
Just a note, on my 22 JLUR, the crash guard on the passenger side gets in the way. I had to bend the horizontal part of the rear panel up about 30° and then had to angle grind off the corner of that same part so it still cleared the body panel. A revision of the passenger rear panel is probably in order for newer model years with that new crash guard.
Great install video guys! 🎉
Any chance these work with Falcon Shocks, keeping the reservior body out from behind the liner?
They just released a version with a cutout specifically for teraflex shocks. Check their website and right now they are having a 17.84% off Rocktoberfest special good on their site only. Just ordered mine!
I couldn’t get things to line up on the passenger side of my 22 jlur. It doesn’t seem that the fender is machined correctly to fit. I think it will require cutting at the top and rear. So frustrating! Friggin another $45 in stupid fender clips later, and still no fender liners
Is JT front the same or is their any mod that needs to be done for JT rubicon gas?
If you buy them new from a dealer or from Artec directly, they will fit the JL/JT with any engine.
How much more tire can you fit with just this upgrade?
We have fit up to 37" tires on a stock height Rubicon with no trimming needed with these fender liners.
What do you do with the stock outer fender plastic. Can you trim it to fit so mid doesn’t get all in there?
Will this fit the Diesel edition?
We will have a Diesel inner fender coming out soon
Although we have had customers install them on diesels, the majority will not work. We have a diesel compatible version that we are currently wrapping up in R&D and should be in production and available in the coming month. Thanks!
@@ArtecIndustries Thanks keep me in the loop.
Excellent. Thanks I'll be looking.
Good job and ty for this post. I'm excited for mine to come in the mail this Tue!
I just received them yesterday at my doorstep. I will be installing them this weekend, this video makes me really confident about doing it myself. Thank you guys.
Probably one of the best install vids.
Thank you
I have rokblokz mud flaps on my Jeep, will I be able to use those if I reuse my stock fenders? Not sure what that piece was that you threw out at 4:25, I’m guessing the mudflaps don’t screw into that piece lol I know this is oddly specific but just curious if anyone else was running the same set up as me 🤣 I already ordered these inner fenders so I’m hoping for the best.
Any update on this?
Awesome video! I can't wait to get these dudes on the Jeep! Thanks for the taco holders, btw.
Are you removing the fender just for videoing? There looks like enough room leaving the fender on.
Nice installation video. I’m sold on ordering these now.
Thanks for the example. You make it look really easy. Now it’s time give it a try.
Love the instruction left no question to be asked. Personality is awesome as well
LLike uor indtsll.installing Spqrtinoanel do you ha a copy of instal instal instructions?
Can you use these with the factory fenders and a chop kit
Yup, done with the install. Dont understand why a company that charges a premium doesnt include the necessary grade 8. One simple cheap bolt and they make you go buy one. Missing hardware wasn't fun either.
They must have seen this comment because mine came with two grade 8 bolts and washers in the hardware bag.
@@2wheeltinker They don't mention this bolt in the video. Where does it go?
@@jnmmatz he’s talking about the bolt needed for the rivets.
Those are dope! I need them something fierce!
Good stuff.