yup, can confirm. just got mine to work with the jaycar 100V 3A diodes. bit bigger and they're not the same casing but you can make it work. i believe these FR diodes get a bit hotter than the B2100 so just make sure you leave the diode with plenty surface area to dissipate the heat.
Did the same, and it works just fine. So disappointed with Bose that a small component is so unreliable. Bose quoted $200 to fix it while the component cost 0.50c
Amazing and thank you so much. Your solution has fixed mine too. Diodes from China on eBay- I ended up receiving 50 by mistake so plenty of room for errors, but did it with the first one. Used a pointed scalpel to remove the glue- cut down vertically in the shape you want to remove then just lever up the glue. Worked a treat. I'm sure people know this, but for soldering, hold the diode upside down very gently in some small grips and dot solder on both the terminals. Hold it with tweezers in position and just apply heat on each connection until the solder melts and sinks down- be patient. Hold it in place until the solder cools then do the other side. The line on the diode goes to the left- hard to see on the original. Thanks again and much appreciated.
Many thanks for sharing this. Part ordered on eBay,delivered from China to France in 2 weeks. Subwoofer fixed and now working ! The most annoying thing is to remove the glue and clean the contacts on the board after removing it. I should advise using a iron soldering where you can set the temperature.
Thnx tonne mate !!! Acoustimass back to life after 5 months !!! B2100 is out of stock across the entire world..... finally tried an alternative- SS210 works flawlessly...... lets hope it stays that way. Though couldnt solder myself..got it done from a local shop...
Thanks very much for the video. I had exactly the same issue with my Bose subwoofer. After 4.5 years, it literally just died overnight. Glad I found this video. I followed the instructions and the subwoofer is working again. The link you provided for the part, the supplier was out of stock. I found the part on digi-key. Glad I ordered five diodes as I fried one on my first attempt with a large soldering iron. Downsized the soldering iron and solder wire to 0.7mm and got the job done. Thanks again :)
Thanks for this video. Ours died just before Christmas and conveniently after warranty expired. I thought I made a mess of it and had no expectation of a glowing light after powering on, but it did! Massive thanks to a commenter here who advises adding two blobs of solder to the reverse side prior to installing; this helped massively.
After replacing the diode the device goes on and works sometimes a minute sometimes longer then it turns orange, off, white on and works again. And this goes like a loop. With the 3,5mm jak same issue. Any idea ?
Thanks for the posting. My woofer also lost power. I have ordered diode B2100A-13-F SMA(DO-214AC). However in the motherboard it was only B2100. Still we replaced and it worked. Amazing
Thank you so much! I have no experience with electronics but a bit of patience and the help of your video I fixed our sub for £3.96. Bose wanted £180! Really appreciate it 🙏
Thanks! I went to the local shop and they gave me a normal diode 60V 3A I believe, they told me it is sufficient. I also removed the glue around the diode using a precision knife instead of heating it. It took a bit longer but it was less messy. It works fine afterwards.
Yep, can confirm , this worked for me too. I had nothing to lose as the sub was given to me and died shortly after. I bought a 10 pack of the 2100 things and with no electronic soldering experience I managed to delicately get it sorted. Thanks for the video.
Thanks for the video; parts arrived this week, and I just completed the fix, all working as it should. Disappointed in Bose, but thanks to your video, it's all sorted for a few bucks.
Fantastic video. Gotta be honest, I had my doubts when first watching it, but had nothing to lose as the subbie wasn’t functioning anyway. Was very pleased to see the light come back on again and power up. All for the cost of about $30 for 50 little microchips. Thank you thank you thank you.
Thank you for this video and guide we repaired our bose subwoofer by our self but instead of using B2100A-13-F (DO-214AC) we use SMD US1M UF4007 1A/1000V SMA Rectifier Diode Fast Recovery Diode. Success 🥳👍 again thank you.
a great THANKYOU for you from the Netherlands. my woofer failt at newyears-eve ... found your video and did the exact same thing... except i didnt put the diode directly to the board but used 2 tiny wires so i was able to put on a more solid soldering. glued the diode to the board after isolating it. and away we go... boomboomboom 🙂
Thank you for this clear video. I have ordered the part on eBay as well. Received it within 2 weeks. Replaced it and the subwoofer works again. Happy me 😂👍🏼 Greetings from The Netherlands.
Thank you so much!!! I never expected this too work. My piece had a lot of hotglue on it and it took forever to scrape off and use heat to get it off. But then I removed the part kind of jammed in the new one and added some solder. Plugged it in... AND IT WORKED AGAIN. Amazing. Thank you so much for the video!
I have had mine for not even 2 months i got it DEC 2021. The BASS module comes on, has the white light on, and is connected to the 700 soundbar and shows up on the app as connected. It just doesn't play any sound out of it at all. I don't know if this is the same issue or another one but its frustrating having something so expensive not work after such a short period of time.
Yours is a different issue. In my issue the power wouldn't do into the circuits and the led did not go on. Don't know how to fix your problem, but maybe on the remote press "bass" then volume up. That controls the woofer volume independently of the sound bar volume.
Thanks for the video. Just repaired my dead Bose 300 subwoofer, though probably the worst soldering example set on earth but who cares… my bose acoustimass 300 subwoofer up and thriving 😊 Thanks again
I've done this fuxs and got know where , I've left it on for hours and nothing , I've plugged in a aux cord that plugged into nothing and about a minute later the orange light came on . I can unplugs the cord and it stays on but then even arfter that it does not pair up or even work via aux cord . And if I turn the power of it doesn't light up at all until I plug that cord in that I plug into nothing at all . Do you have any ideas on what to do next to get this to work ?
I have the exact same issue. Replaced diode but no light until i plug in an aux/jack cable into the ‘acoustimass in’ port. Then a solid amber light appears, but unable to link to the soundbar nor sound can be heard. Pls help!
I had the same defect after 17 months on the BOSE Acoustimass 300, diode intact on the outside, tested with a multimeter and there was continuity in both directions of polarity. Thanks to your video, I ordered B2100A from china, arrived in three weeks, replaced and tested, everything is perfect. It is working again. MYTHICAL outie555
Hi I’ve had the same problem but Bose repaired it. Now my soundbar 300 has just stopped working - no lights or response from it. Power is available and checked. Any idea what I should look for as a fault. Also item is out of warranty. Thanks
Hey, thank you so much for sharing this video. I had the same problem with my bose bass, ordered the chip on ebay, installed it after removing the old one. Soldering was a little bit difficult because of the small size of the chip and small space between the chips. I wasn’t sure if had done it correctly. But after testing the bass, it worked perfectly! Thank you 😊
I was hoping someone could assist me, there are two larger (2512 size) surface mount resistors on the bottom of the board when you first remove the cover. One is marked 7R5 the other is mounted with provision for another beside it. Could someone please tell me the value of the other resistor please?
How did you find out which part was broken? My bose speaker goes on and off again hasnt lost power completely but i wouldnt know if its the same part or a different one?
I found out by digging around the internet for what fails on them. Your problem might not be the same as mine just didn't turn on one day. But for the cheap cost of the chip, might be best to just try it.
Great Video, thank you! One question, can you tell me how to take the piece out under the circuit board? I need to disassemble to whole module. Thank you for any suggestions!
Thanks for the video, have the same problem, hopefully it will help me too. I have not yet carried out the repair, I was only ordering spare parts. Have a question: how do you know it's the B2100A-13-F diode? All I can see is that it says B2100 on the diode, without the letter "A". Do you know if there is difference between B2100A and B2100? Because B2100A is only available from China and B2100 can be delivered to me in 2 days. thank you
Can you give me advice my bose bass module 700 got wet. My basement flooded half inch of water so the cord and the base got wet and its not working anymore. Is there anyway i can save it?
HEllo . Meme problème. tu as commandé ta pièce ? En France ? Merci d'avance pour ta réponse et heureusement quon a des Tuto comme celui-ci pour la debrouille. Bonne soirée. JPaul
@@eriba430tu verras lorsque que tu vas démonter le caisson il y a une sorte de colle de protection j'ai du la faire fondre avant de pouvoir dessouder et ressouder la résistance bon courage
I’m not an electronic expert, but my bass 500 Bose module stopped working for me. 😢. People on utube showed me the fuse , but I still couldn’t get it off. Any advice why my 500 Bose sub not receiving power?
Just double checking for reassurance as not ordered the diode yet, but does it simply sit on the circuit board with blobs of solder to keep attached? Thanks.
Very fiddly but all done!!! Never really used a soldering iron before and thought it wouldn't work as wasn't too sure if i soldered the right hand side correctly/sufficiently, however it did. Thank you so much for your expertise 👍 @@outie555two
I wouldn't put hot glue on the diode. That is probably the reason that it failed in the first place (my brothers Bose failed too and that had some glue on it)! Those diodes get hot and must dissipate heat into air. The hot glue is used around inductors to stop them whistling and also for mechanical fixing too. The person who was responsible for the hot glue was obviously trigger happy and covered over a critical component that needs to be in free air. If it fails again, next time clear away any old glue.
where can I buy this diode? Do you sale or provide info where I can buy it please another question, for second sub, amber light change to white led for 2 second then goes red light and goes off for 5 second, (it is cycling amber-white-red) i think it has wrong FW, How can i upgrade subwoofer FW correctly? when I look in app, it show Subwoofer 700, actually it is 300.
nice job. i have bose acoustimass 10 series iv subwoofer. all other channels working good. but subwoofer sound is not normal. working but very low sound and not pure bass. very week bass coming. how can i fix?
My subwoofer lasts 8 minutes working normally and then it turns off and starts restarting until it cools down again. Will it be the same problem? Will it be solved with that?
Hi! I changed the diode you mentioned and the light doesn't turn on yet. Should I necessarily connect the board to the sub to check it works or is the light supposed to turn on anyway empty? I apologize if something isn't understood since English is not my first language. Thanks in advance.
After replacing the diode my bass module 700 worked again but i felt the sound is broken(fluttering) . Can u please suggest any fix ? Thanks in advance💯
Hi Sir I have same issue, manage to disamble the unit but can’t see any damage to the chip, just a silly question can we physically able to see the damage and is it 100% this chip to replace not any other. Kind regards
You cannot physically see the damage to the chip. It's a common fault with this model and literally hundreds of people have swapped that chip out with a new one and got the speaker powering up and working again
Great Vid. I have the same Problem. But which diode can i Use ? I find DO-214 AC in 40 V and 60 V and 100 V. Which one i have to bye ? Sorry for my English
Thank you very much for this video! I have a question: I have an Acoustimass 300 (purchased in 08/2008) that stopped working this morning even though it was working yesterday and hasn't been moved for years. The LED does not light up anymore... How can I know if the failure can be repaired by your method? Is it (unfortunately) common enough to know that it's that? Comment: for the price of this equipment, it's incredible that the components of the subwoofer can just fail like this... Thanks in advance for your help!
Its almost certainly going to be that problem. It's such a cheap and relatively easy method to replace the chip so you've really got nothing to loose. Obviously I cannot say for certain that it is your problem but a lot of people have had this issue resolved with the method in the video.
@@outie555two thanks a lot for your answer ; for sure you cannot be 100% sure ... I've ordered the cheap and will try to do it properly ... I've contacted Bose afterasale service and they don't want to know anything ... repair is 145€ !!! I will try to repair but anyway, they've lost a client. Won't buy anymore Bose product. You don't invest so much money to have your system down after a few years. thank you so much for this video that helped so many people !
If it's got the same woofer then probably would. They sell the same woofer but with different sound bars then call the package a different number, but is likely to have the same internal parts.
hast du das selber gut hinbekommen? ich hab noch nie in meinem leben was gelötet und auch kein werkzeug, sieht aber wirklich nicht allzu schwer aus. oder ich bring es zu einem technik shop und frag ob sie das hinkriegen nach der video anleitung.
Hello guys, sry but my English is not the best.. Can anyone tell me which chip I have to buy for the acoustimass 300? Thanks very much for your help ❤️
You are my hero 😎 thank you for sharing this video. I had the same problem like you and I am very happy to solve it. Thank you very much and best regards from Germany 😉
This fix didn't work for me :( Mine will not display any lights when plugged into power. But when I plug aux to the unit. It connects to the app and sais it's there , but won't produce sound. If I unplug the aux, light goes out , and it cannot be found wirelessly Has any one experienced this ???
After 4 years I have a connection issue with my AM300. After a few minutes the white indication light keeps switching to OFF --> AMBER ---> WHITE and then it keeps repeating, without any sound output. After turning off the Soundtouch 300 it works again for maybe 1 minute and then the issue repeats again. I already tried it with the 3.5mm wired connection but still the same issue. Anyone experienced this? Not sure if it is in some kind of "boot loop" but someone knows if this FIX here may also work for my problem??
The faulty diode looked fine on the outside. You might be able to test it with a multimeter but if your speaker isn't turning on its probably that diode being faulty anyway.
Thanks for posting! I use FR302 100V 3A D027 from JAY CAR Worked for me.
yup, can confirm. just got mine to work with the jaycar 100V 3A diodes. bit bigger and they're not the same casing but you can make it work. i believe these FR diodes get a bit hotter than the B2100 so just make sure you leave the diode with plenty surface area to dissipate the heat.
Used the same worked perfect
Did the same, and it works just fine. So disappointed with Bose that a small component is so unreliable. Bose quoted $200 to fix it while the component cost 0.50c
Thanks! Used this and worked!
Worked for me too. Thank you
Amazing and thank you so much. Your solution has fixed mine too. Diodes from China on eBay- I ended up receiving 50 by mistake so plenty of room for errors, but did it with the first one. Used a pointed scalpel to remove the glue- cut down vertically in the shape you want to remove then just lever up the glue. Worked a treat. I'm sure people know this, but for soldering, hold the diode upside down very gently in some small grips and dot solder on both the terminals. Hold it with tweezers in position and just apply heat on each connection until the solder melts and sinks down- be patient. Hold it in place until the solder cools then do the other side. The line on the diode goes to the left- hard to see on the original. Thanks again and much appreciated.
Thanks for the soldering tips.
This probably saved me from frying a chip. I used an extra pair of hands as I didn’t have a vice/grip and this instantly helped. Thanks a lot!
Many thanks for sharing this. Part ordered on eBay,delivered from China to France in 2 weeks. Subwoofer fixed and now working ! The most annoying thing is to remove the glue and clean the contacts on the board after removing it. I should advise using a iron soldering where you can set the temperature.
Good to hear mate
Thnx tonne mate !!! Acoustimass back to life after 5 months !!!
B2100 is out of stock across the entire world..... finally tried an alternative- SS210 works flawlessly...... lets hope it stays that way.
Though couldnt solder myself..got it done from a local shop...
Thanks very much for the video. I had exactly the same issue with my Bose subwoofer. After 4.5 years, it literally just died overnight. Glad I found this video. I followed the instructions and the subwoofer is working again.
The link you provided for the part, the supplier was out of stock. I found the part on digi-key. Glad I ordered five diodes as I fried one on my first attempt with a large soldering iron. Downsized the soldering iron and solder wire to 0.7mm and got the job done. Thanks again :)
Bro I nearly went off
Thanks for this video. Ours died just before Christmas and conveniently after warranty expired. I thought I made a mess of it and had no expectation of a glowing light after powering on, but it did!
Massive thanks to a commenter here who advises adding two blobs of solder to the reverse side prior to installing; this helped massively.
After replacing the diode the device goes on and works sometimes a minute sometimes longer then it turns orange, off, white on and works again. And this goes like a loop. With the 3,5mm jak same issue.
Any idea ?
Thanks for the posting. My woofer also lost power. I have ordered diode
B2100A-13-F SMA(DO-214AC). However in the motherboard it was only B2100. Still we replaced and it worked. Amazing
Probably the same chip but ran out of space to print the whole info.
Was fading the same issue and I followed your video instructions to fix mine. It works now like a charm. Thx a lot for the sharing.
Thank you so much! I have no experience with electronics but a bit of patience and the help of your video I fixed our sub for £3.96. Bose wanted £180! Really appreciate it 🙏
Glad it helped
Thanks! I went to the local shop and they gave me a normal diode 60V 3A I believe, they told me it is sufficient.
I also removed the glue around the diode using a precision knife instead of heating it. It took a bit longer but it was less messy. It works fine afterwards.
Yep, can confirm , this worked for me too. I had nothing to lose as the sub was given to me and died shortly after. I bought a 10 pack of the 2100 things and with no electronic soldering experience I managed to delicately get it sorted. Thanks for the video.
Great job
I have problem lighting amber, white and red. Would be the same diagnose to change the diode 100V 3A ?
It’s alive!! Thanks mate. Got my acoustimass 300 working again after lying in the corner lifeless for almost 2 years 😅
Nice, glad you found my video
Thanks for the video; parts arrived this week, and I just completed the fix, all working as it should. Disappointed in Bose, but thanks to your video, it's all sorted for a few bucks.
That makes me happy Lee!
Fantastic video. Gotta be honest, I had my doubts when first watching it, but had nothing to lose as the subbie wasn’t functioning anyway. Was very pleased to see the light come back on again and power up. All for the cost of about $30 for 50 little microchips. Thank you thank you thank you.
Hi , could you please let me know where you bought them from? Thanks.
Great post, thanks. My subwoofer packed in out of the blue. Bought a pack of 5 J401 diodes on eBay for a fiver and all fixed now.
Excellent!
Thank you, you saved another Acoustimass 300, I replaced it with a ‘SMD Diode SM4007A 1000V 1A D0214AC’ from Jaycar, many thanks!!
It's a great speaker otherwise.
It worked perfectly, fixed my subwoofer in India using this, many thanks!
Great!
Thank you for this video and guide we repaired our bose subwoofer by our self but instead of using B2100A-13-F (DO-214AC)
we use SMD US1M UF4007 1A/1000V SMA Rectifier Diode Fast Recovery Diode. Success 🥳👍
again thank you.
hello are these the same size as the existing diode or bigger? if they are bigger how did you fit them into the same spot to solder them on?
Thanks for the video man! Just fixed my Acoustimass 300 for my Lifestyle 650! Bose was charging a bomb to fix.
thx ! Your video made me revive my subwoofer. After exchanging the diode I was able to feel again my basses. 💪💪💪
Noice
a great THANKYOU for you from the Netherlands. my woofer failt at newyears-eve ... found your video and did the exact same thing... except i didnt put the diode directly to the board but used 2 tiny wires so i was able to put on a more solid soldering. glued the diode to the board after isolating it. and away we go... boomboomboom 🙂
What a coincidence, the subwoofer from my father died as well on NYE
By the way, where did you order the diodes and is there a chance you got some spare ones? We live in Germany near the border
Thank you so much. My Bass 300 has been sitting in the attic for over 2 years. Great video. Keep up your good work.
Did you get it working?
Thank you for this clear video. I have ordered the part on eBay as well. Received it within 2 weeks. Replaced it and the subwoofer works again.
Happy me 😂👍🏼
Greetings from The Netherlands.
Glad it helped
Thank you so much!!!
I never expected this too work. My piece had a lot of hotglue on it and it took forever to scrape off and use heat to get it off.
But then I removed the part kind of jammed in the new one and added some solder.
Plugged it in... AND IT WORKED AGAIN.
Amazing. Thank you so much for the video!
You're welcome!
Fantastic video. Fixed a £700 speaker and the diodes only cost me £1.30 for 10 on ebay.
Looking to do the same, do you have a link? can only find chinese for £15?
@@screamingninja1335 I Have 9 that you can have for the price of postage if you like?
@@prosci2579 UK
You sir, are a legend!
I have had mine for not even 2 months i got it DEC 2021. The BASS module comes on, has the white light on, and is connected to the 700 soundbar and shows up on the app as connected. It just doesn't play any sound out of it at all. I don't know if this is the same issue or another one but its frustrating having something so expensive not work after such a short period of time.
Yours is a different issue. In my issue the power wouldn't do into the circuits and the led did not go on. Don't know how to fix your problem, but maybe on the remote press "bass" then volume up. That controls the woofer volume independently of the sound bar volume.
@@outie555two I did that the speaker was just completely inactive still I swapped it with a new one from the store yesterday
Tengo un acousticmas 10 serie iv y no sale el audio del canal central, cual será el problema?
Thanks for the video. Just repaired my dead Bose 300 subwoofer, though probably the worst soldering example set on earth but who cares… my bose acoustimass 300 subwoofer up and thriving 😊
Thanks again
Hallo ...unsere Box ist jetzt auch kaputt...Bitte was muss ich wo bestellen..dieser Chip aus dem Video..Danke für Antwort
Nice to hear it worked. I think I've saved thousands of these going to landfill through this video
Thanks so much, I think I could do this myself after watching your excellent video. You’re a legend!
I've done this fuxs and got know where , I've left it on for hours and nothing , I've plugged in a aux cord that plugged into nothing and about a minute later the orange light came on .
I can unplugs the cord and it stays on but then even arfter that it does not pair up or even work via aux cord .
And if I turn the power of it doesn't light up at all until I plug that cord in that I plug into nothing at all .
Do you have any ideas on what to do next to get this to work ?
I have the exact same issue. Replaced diode but no light until i plug in an aux/jack cable into the ‘acoustimass in’ port. Then a solid amber light appears, but unable to link to the soundbar nor sound can be heard. Pls help!
I had the same defect after 17 months on the BOSE Acoustimass 300, diode intact on the outside, tested with a multimeter and there was continuity in both directions of polarity. Thanks to your video, I ordered B2100A from china, arrived in three weeks, replaced and tested, everything is perfect.
It is working again.
MYTHICAL outie555
Fixed mine! Thanks for the video!
Hi
I’ve had the same problem but Bose repaired it. Now my soundbar 300 has just stopped working - no lights or response from it. Power is available and checked. Any idea what I should look for as a fault.
Also item is out of warranty.
Thanks
Hey, thank you so much for sharing this video. I had the same problem with my bose bass, ordered the chip on ebay, installed it after removing the old one. Soldering was a little bit difficult because of the small size of the chip and small space between the chips. I wasn’t sure if had done it correctly. But after testing the bass, it worked perfectly! Thank you 😊
Glad I could help
Will this fix one that isn’t connecting the speaking? Mine is showing amber then white and red lights. Won’t connect
No, this just fixes the sub woofer if it is not turning on. The subwoofer has a light on it to see if it turns on.
Hi, I have the same problem, but I can't find the or at least I don't know how to search. Can you help me?
I was hoping someone could assist me, there are two larger (2512 size) surface mount resistors on the bottom of the board when you first remove the cover. One is marked 7R5 the other is mounted with provision for another beside it. Could someone please tell me the value of the other resistor please?
I have same issue...planning to open up..have ordered diodes to replace .. hope it works for me as well
Many thanks mate - never undertaken a board repair before - all fixed and working - probably going to be a bit crossed for a while 😊
Hi! I have bose 300 soundtouch bar and subwoofer it can connect only by Bluetooth but I have issues connecting to t.v.
My Acoustimass 300 flashes pulsating white and orange. get no sound out ! What could it be ? defective circuit board ?
Not the same issue that's fixed in this video. Without knowing what the solution is, maybe it just needs to be re synchronised to the base unit?
How did you find out which part was broken? My bose speaker goes on and off again hasnt lost power completely but i wouldnt know if its the same part or a different one?
I found out by digging around the internet for what fails on them. Your problem might not be the same as mine just didn't turn on one day. But for the cheap cost of the chip, might be best to just try it.
@@outie555two Thank You
Class video. I'm having the same exact problem. Hoping to get it fixed today!
Great Video, thank you! One question, can you tell me how to take the piece out under the circuit board? I need to disassemble to whole module. Thank you for any suggestions!
Not my area of expertise, but maybe someone will know an answer
Thanks for the video, have the same problem, hopefully it will help me too.
I have not yet carried out the repair, I was only ordering spare parts.
Have a question: how do you know it's the B2100A-13-F diode? All I can see is that it says B2100 on the diode, without the letter "A".
Do you know if there is difference between B2100A and B2100?
Because B2100A is only available from China and B2100 can be delivered to me in 2 days.
thank you
Which one you used? Did it fixed your speaker?
Can you give me advice my bose bass module 700 got wet. My basement flooded half inch of water so the cord and the base got wet and its not working anymore. Is there anyway i can save it?
Probably a gonner if it was powered and got wet.
Merci pour la vidéo, j'ai réalisé la réparation incroyable ça fonctionne. 🎉🎉
HEllo . Meme problème. tu as commandé ta pièce ? En France ? Merci d'avance pour ta réponse et heureusement quon a des Tuto comme celui-ci pour la debrouille. Bonne soirée. JPaul
@@eriba430tu verras lorsque que tu vas démonter le caisson il y a une sorte de colle de protection j'ai du la faire fondre avant de pouvoir dessouder et ressouder la résistance bon courage
I’m not an electronic expert, but my bass 500 Bose module stopped working for me. 😢. People on utube showed me the fuse , but I still couldn’t get it off. Any advice why my 500 Bose sub not receiving power?
Not a fuse problem in my video. It's a chip that needs to be desoldered from the board and a new one soldiered back on.
Just double checking for reassurance as not ordered the diode yet, but does it simply sit on the circuit board with blobs of solder to keep attached? Thanks.
Basically, yes.
Very fiddly but all done!!! Never really used a soldering iron before and thought it wouldn't work as wasn't too sure if i soldered the right hand side correctly/sufficiently, however it did. Thank you so much for your expertise 👍 @@outie555two
I wonder if that's why this bose sound touch 300 dosent want to turn on
I have this sub woofer and it makes these scratchy sounds and and doesn’t work. Do you think it’s the same problem?
I never experienced those symptoms, it just didn't turn on one day.
Thank you very much!!!
Now it is working again. 🎉
I gave mine to a local repairer and he's struggling at the moment. Is there an away I could buy a new board and if yes, where? I need help.
Not sure, but perhaps someone else is selling a broken one cheaply near you.
Can no longer pair Max Box.the status light remains off despite the Power supply.what exactly was defektive in your Box?
Trank you
That one chip I replaced was the problem, and sounds like your issue too.
@@outie555two thanks
Thanks for posting...which hot glue did you use (SuperX777)?
I wouldn't put hot glue on the diode. That is probably the reason that it failed in the first place (my brothers Bose failed too and that had some glue on it)! Those diodes get hot and must dissipate heat into air. The hot glue is used around inductors to stop them whistling and also for mechanical fixing too. The person who was responsible for the hot glue was obviously trigger happy and covered over a critical component that needs to be in free air. If it fails again, next time clear away any old glue.
hola mi subwoofer bose 700 también se daño, se escucha bajito o emite sonido débil sabes que puedo hacer ?
Turn the volume up by pressing on the remote bass, then volume up buttons.
where can I buy this diode? Do you sale or provide info where I can buy it please
another question, for second sub, amber light change to white led for 2 second then goes red light and goes off for 5 second, (it is cycling amber-white-red) i think it has wrong FW, How can i upgrade subwoofer FW correctly? when I look in app, it show Subwoofer 700, actually it is 300.
Thanks very much for the video. I had the same problem with my acoustimass 300. Now it is working.
Great news
nice job. i have bose acoustimass 10 series iv subwoofer. all other channels working good. but subwoofer sound is not normal. working but very low sound and not pure bass. very week bass coming. how can i fix?
On the remote, press bass, the volume up.
@@outie555two it’s circuit board problem. I tried all other ways.
My subwoofer lasts 8 minutes working normally and then it turns off and starts restarting until it cools down again. Will it be the same problem? Will it be solved with that?
I don't think you have the same problem as this problem doesn't have the same symptoms. It just doesn't turn on one day.
Nice tutor😮😊🎉
Thanks for watching
Very good and clear video ! I did repair like video and now the module works again. Thank you for sharing !
Glad it helped
Super Video! thanks - I just repaired my dead Acoustimass 300!
Is it possible to connect by cable?
I wouldn't. There is a reason the chip is in there.
Hi!
I changed the diode you mentioned and the light doesn't turn on yet. Should I necessarily connect the board to the sub to check it works or is the light supposed to turn on anyway empty?
I apologize if something isn't understood since English is not my first language. Thanks in advance.
Not sure, as I'm no professional. Perhaps someone else reading your comment might have an answer.
Did yours still come on but just not play bass or is this a different issue you think?
After replacing the diode my bass module 700 worked again but i felt the sound is broken(fluttering) . Can u please suggest any fix ? Thanks in advance💯
What is the price of this chip u installed plz
Thanks to your kindness.
Mine just got a piece of plastic stuck in there and I can’t get it out
Hi Sir
I have same issue, manage to disamble the unit but can’t see any damage to the chip, just a silly question can we physically able to see the damage and is it 100% this chip to replace not any other. Kind regards
You cannot physically see the damage to the chip. It's a common fault with this model and literally hundreds of people have swapped that chip out with a new one and got the speaker powering up and working again
Ordering now. Thanks for showing us how. We will make a video with our experience.
Have fun!
@@outie555two got it fixed up.
Great Vid. I have the same Problem.
But which diode can i Use ?
I find DO-214 AC in 40 V and 60 V and 100 V. Which one i have to bye ?
Sorry for my English
100V 2Ah schottky smd
Thank you very much for this video! I have a question: I have an Acoustimass 300 (purchased in 08/2008) that stopped working this morning even though it was working yesterday and hasn't been moved for years. The LED does not light up anymore... How can I know if the failure can be repaired by your method? Is it (unfortunately) common enough to know that it's that? Comment: for the price of this equipment, it's incredible that the components of the subwoofer can just fail like this... Thanks in advance for your help!
Its almost certainly going to be that problem. It's such a cheap and relatively easy method to replace the chip so you've really got nothing to loose. Obviously I cannot say for certain that it is your problem but a lot of people have had this issue resolved with the method in the video.
@@outie555two thanks a lot for your answer ; for sure you cannot be 100% sure ... I've ordered the cheap and will try to do it properly ... I've contacted Bose afterasale service and they don't want to know anything ... repair is 145€ !!! I will try to repair but anyway, they've lost a client. Won't buy anymore Bose product. You don't invest so much money to have your system down after a few years. thank you so much for this video that helped so many people !
Does this fix a bose lifestyle 600/650 too?
If it's got the same woofer then probably would. They sell the same woofer but with different sound bars then call the package a different number, but is likely to have the same internal parts.
Would a fr309 1300v 3a work?
Is this for the acoustimass 300 model? If not is the part number for the diode still a suitable replacement for the 300 model?
Not 100% sure but if your speaker looks the same and has the same "won't power on" issue, I reckon it will be exactly the same inside.
So our one is the 300 as it comes with the 300 soundbar. So sounds like it's the same model as what you have.
1:02 you can see the label of the modul. it´s the acustimass 300
Vielen Dank bei mir hat es wunderbar geklappt! Die Außenschrauben kann man aber drin lassen. Diode J401 wechseln.
hast du das selber gut hinbekommen? ich hab noch nie in meinem leben was gelötet und auch kein werkzeug, sieht aber wirklich nicht allzu schwer aus. oder ich bring es zu einem technik shop und frag ob sie das hinkriegen nach der video anleitung.
Woher hast du das benötigte Ersatzteil bekommen?
como encontraste la falla sin tester??
Thanks for posting, worked a treat👍🏻👍🏻👍🏻
Another one saved from the dump
Danke für die Anleitung, hat super funktioniert! War nur ein wenig schwierig an die Diode zu kommen!
Kannst du mir sagen, woher du das Ersatzteil bekommen hast? Und es ist der 500er Bose genauso? Danke
@@kfxer5213 sorry, kann ich dir leider nicht sagen, müsstest du mal nachschauen…
@@michaelschwarz580 und woher hast du das Ersatzteil bekommen?
@@kfxer5213 Über AliExpress…
Thanks mate 👍 great video and saved this getting binned
Glad it helped
What parts and where can you get them
Maybe read the description and check the comments for what others have found that work.
Thanks a lot! Worked for me. Took me, 15 min at all.
Thank you so much... honestly thought id have to fork out for a new Base Module or repair.
Hw to connect to t.v. I tryed using HDMI CABLE
Many many thanks!! Worked :-) Greetings from Germany
You're welcome!
Absolute legend myn is working now thank you
Hello guys, sry but my English is not the best..
Can anyone tell me which chip I have to buy for the acoustimass 300?
Thanks very much for your help ❤️
You are my hero 😎 thank you for sharing this video. I had the same problem like you and I am very happy to solve it. Thank you very much and best regards from Germany 😉
Great Video, but why on earth do you guys put hot glue back on the component ? For what reason ?!??
Assuming that the bass can make the chips walk, so reapplying what the manufacturer did in the beginning.
@@outie555two they mostly do that because of the soldering process, not because of vibrations !
Thanks for the video. Do you have the service manual??
No, sorry
Muchas gracias, por haberme dado la posibilidad de arreglarlo, yo solo. Sin este vídeo tutorial no hubiese podido. Thank you very much!
Es genial escucharlo y me alegro de haber podido ayudarte a solucionarlo.
This fix didn't work for me :(
Mine will not display any lights when plugged into power.
But when I plug aux to the unit. It connects to the app and sais it's there , but won't produce sound.
If I unplug the aux, light goes out , and it cannot be found wirelessly
Has any one experienced this ???
After 4 years I have a connection issue with my AM300. After a few minutes the white indication light keeps switching to OFF --> AMBER ---> WHITE and then it keeps repeating, without any sound output. After turning off the Soundtouch 300 it works again for maybe 1 minute and then the issue repeats again. I already tried it with the 3.5mm wired connection but still the same issue. Anyone experienced this? Not sure if it is in some kind of "boot loop" but someone knows if this FIX here may also work for my problem??
I am having the same exact issue. Did you fine the fix? If so can you please share?
Could you please share the solution for your problem? I am also facing the same issue.
@@mohank6322 I shipped it to Bose support, they changed a component (some Diode) and now it works again - Total costs 120€ ..
@@durst99 Thanks!! a lot.
@@mohank6322 Hello Friend, are you already done with your problem?
Hello, great video, physically did the out of service diode look burnt?
I have the exact same problem but the J401 diode looks ok
The faulty diode looked fine on the outside. You might be able to test it with a multimeter but if your speaker isn't turning on its probably that diode being faulty anyway.