Hi everyone! Let me know if you have any questions in the comments below! Also remember you can get the free Keyboard shortcut guide at www.thesketchupessentials.com/beginner !
Sir..How to Set the Feet & Inches Units of Measure in SketchUp. How can use Feet & Inches in Same Sheet, Same Time… 1’=12” but I can’t Draw 1’, 11” Lines…
thank you for your videos, which I found while searching for an answer to the following issue. When I right click with my mouse the dropdown menu to Group doesn't come up. I have SketchUp Pro 2021 and am using a Mac. I have to go to the Menu Bar. I would appreciate your advice. Sharon
I'm only on video 3 in your beginner playlist(and a few rando's) and brother, you are THE MAN!! Great Sound, no flashy editing, no overbearing music (or over the top annoying intro even) and for me the best thing is how you give the different mac/pc ways of doing things. and I know by the end of just this series me and my wife will be imitating the smooth voice stylings of your: "What's up guys…" Thank You Master!
Hello Justin Geis. I'm loving your videos. They are absurdly excellent. Every day I have learned a lot from you. Be richly blessed. Greetings from Brazil.
I've been taking a college course for 7 weeks where we use this program and I had no clue what was going on. I've watched three of your videos and already have a much better grasp of this program. Thanks! (But also, man school is a disappointment)
(16.40) Thank you Justin 🍏❤️! BTW - this video is an excellent summary of a ton of great workflow tips and the chapters are working really well to quickly find new information.
Hi, you are a really great teacher! Untill know you helped me a lot because i am a beginner. Just one question after minute 21. I can't create copy's with the rotate tool. Don't know what i am doing wrong. Saw the video over and over again, can't find the problem. Thank you
first you move, then press ctrl to keep a copy in its original place, after you define the space between them " 1 meter then press enter " if you want 3 copies after done that, just type "3x" (or times 3)
Do you cover in any of your courses modeling from point cloud / laser scans ? I am new to sketch up. However thanks a lot for your great video turorials.
at 6:59 timeine... can you say how do you copy and move stuff around at the exact same plane? I end up with the object I just copied at different locations in space...and not on the same level in one of the axis.
first you move, then press ctrl to keep a copy in its original place, after you define the space between them " 1 meter then press enter " if you want 3 copies after done that, just type "3x" (or times 3)
Hi Justin, I just started with Sketchup Pro and have signed up for your course. I have two questions. 1. I tried to download your keyboard strokes document but it didn't seem to exist. and 2. (which may be covered in the above) how can I go from any of the tools to get back to the Arrow function without going up to the top left to click on the arrow symbol? Thanks. Ian
Go ahead and leave a post in the Course community forum and I'll get you the link to the document. For the Arrow function, just tap the space bar key to go back to the arrow
I am using a grouped rectangle to push-pull beams section for use in my structural framing that I am trying. By using a grouped area, I get a grouped beam section. However, the push-pull done through editing the grouping does not seem to allow the inferencing. Is there a workaround to this?
Hi, i am currently using skp 2021and i am facing huge problem just because multipy option is not working..... the one with Divide is working but dur to the accuracy of the measurement its just useless
hi, thank you for the very informative video i have two questions please when applying materials to my view they just appear like plain colors with no textures! why is that happening? the second thing is that on the left tray the out liner option is not there am using a trial version ,,,,, does this have anything to do with it? thanks in advance
I'm enjoying this tutorial series, but I cannot get this Part 3 video to play. It never loads. I can play any of the other videos just fine. Not sure what the issue is. I hate to skip a lesson, as I really want to learn proper.
I know this tutorial is for the desktop version, but I am trying to manage groups on the free web version. I see a place to create a group, but I don't see where I can retrieve a group I made earlier, or to select a group. (Yes, I see components.) Is this function available on the free web version?
@@Thesketchupessentials hello Justin , your tutorials are the main reason I stuck it out with the program. Thanks a million. Is there a GROUP heading in the 2021 tray? Cannot find mine. thank you so much.
Sir，I got a warning : " a component with that definition already exists", and when I edit my component or make unique then edit them, they don't make a change. Only when I make the component(with same name) a second time(still gets warning) will it overwrite the original components and apply my change. What can I do about that?
Please Help!!! .make group and make component buttons are greyed out and now I'm not able to create them. Upgraded to Sketchup 2021 today. Installed some extensions. Everything OK tillen the group and components buttons greyed out. Anyone has a solution?
first you move, then press ctrl to keep a copy in its original place, after you define the space between them " 1 meter then press enter " if you want 3 copies after done that, just type "3x" (or times 3)
Hi everyone! Let me know if you have any questions in the comments below! Also remember you can get the free Keyboard shortcut guide at www.thesketchupessentials.com/beginner !
Sir..How to Set the Feet & Inches Units of Measure in SketchUp. How can use Feet & Inches in Same Sheet, Same Time…
1’=12” but I can’t Draw 1’, 11” Lines…
This is little complicated
thank you for your videos, which I found while searching for an answer to the following issue. When I right click with my mouse the dropdown menu to Group doesn't come up. I have SketchUp Pro 2021 and am using a Mac. I have to go to the Menu Bar. I would appreciate your advice. Sharon
i can't find display tap from your web ver. in my PC version
Pls how do I join your class
I'm only on video 3 in your beginner playlist(and a few rando's) and brother, you are THE MAN!! Great Sound, no flashy editing, no overbearing music (or over the top annoying intro even) and for me the best thing is how you give the different mac/pc ways of doing things. and I know by the end of just this series me and my wife will be imitating the smooth voice stylings of your: "What's up guys…" Thank You Master!
I found this channel yesterday and I have to say your videos are amazing, they are straight to the point.
Thanks for sharing.
You’re an amazing human. Thank you for putting your time into this 💖
Thank you very much sir, stumbled upon your channel yesterday, finished the first two parts , also subscribed and rang the little notification bell😁
Hello Justin Geis. I'm loving your videos. They are absurdly excellent. Every day I have learned a lot from you. Be richly blessed. Greetings from Brazil.
I've been taking a college course for 7 weeks where we use this program and I had no clue what was going on. I've watched three of your videos and already have a much better grasp of this program. Thanks!
(But also, man school is a disappointment)
What are you studying? If you don't mind me asking of course 😄
(16.40) Thank you Justin 🍏❤️! BTW - this video is an excellent summary of a ton of great workflow tips and the chapters are working really well to quickly find new information.
Awesome - glad you liked it! :)
The lessons are very clear and I like the way you start your videos.
couldnt really do this bit for some reason 14:50, but thanks for a great tutorial.
LOVE these videos!!
Glad you like them!
love your videos, helps me a lot with my homeworks, thank you!
Thank you for sharing! Very clear and easy to follow
Very informative. finally done with part 3. Thanks for your videos sir!:)
This video is so good.Thanks😊
Sir ! ur video really teach me alot, from zero knowledge until i can make a design just from ur video, thank you so much sir !!! bless u
Thankyou very much for sharing the knowledge. This is very helpful.
Thank u sir am new in learning sketch up and I was inspired by a friend and am learning it over your online lessons thank u and am great full
These are sooooo helpful man thank you soo much...
Glad you like them!
Thanks for sharing your knowledge. Very nicely laid out and easy to follow :)
You're very welcome!
you just made this travel trailer build I'm working on so much easier when lining stuff up. I have been click and dragging this hole time
Awesome! :)
thanks alot its good for beginners
Excellent information!! Thank You!!🙏🙏🙏
Really excellent information video watching from Nepal .
Thanks for watching!
Thank you so much for the video! It is really helpful!
This work is excellent i am learning alot from pts cad expert, mimi Estelle , source Cad they all are prouiding helpful content
great tutorial for beginners. Thanks
FYI The change copy move function (i.e *2 to *6) works okay with my installation of 2021. Awesome lesson. thanks.
Thank you so much!
Hi, you are a really great teacher! Untill know you helped me a lot because i am a beginner. Just one question after minute 21. I can't create copy's with the rotate tool. Don't know what i am doing wrong. Saw the video over and over again, can't find the problem. Thank you
first you move, then press ctrl to keep a copy in its original place, after you define the space between them " 1 meter then press enter " if you want 3 copies after done that, just type "3x" (or times 3)
Do you cover in any of your courses modeling from point cloud / laser scans ? I am new to sketch up. However thanks a lot for your great video turorials.
Currently no, I don't cover point clouds/laser scans
at 6:59 timeine... can you say how do you copy and move stuff around at the exact same plane? I end up with the object I just copied at different locations in space...and not on the same level in one of the axis.
first you move, then press ctrl to keep a copy in its original place, after you define the space between them " 1 meter then press enter " if you want 3 copies after done that, just type "3x" (or times 3)
What is the best way to use this to help designing outdoor kitchens
I don't fully understand the question. You'd draw the kitchen using the tools we talk about in the tutorials?
Great session but I try to input a door to the frame created and it is bigger than the house.what is your advice
Ok im new to this software, want to make sure before i purchase.
Ty
thanks!
How do you make a cone? I tried a lot but unable to convert a cylinder into a cone.
Hi Justin, I just started with Sketchup Pro and have signed up for your course. I have two questions. 1. I tried to download your keyboard strokes document but it didn't seem to exist. and 2. (which may be covered in the above) how can I go from any of the tools to get back to the Arrow function without going up to the top left to click on the arrow symbol? Thanks. Ian
Go ahead and leave a post in the Course community forum and I'll get you the link to the document. For the Arrow function, just tap the space bar key to go back to the arrow
@@Thesketchupessentials thanks Justin
hi, i dont have the outliner section in my tray, am I supposed to add it on somehow?
windows - default tray - outliner
sir what specs of laptop need to start sketchup.hope you can give an idea thank you
I am using a grouped rectangle to push-pull beams section for use in my structural framing that I am trying. By using a grouped area, I get a grouped beam section. However, the push-pull done through editing the grouping does not seem to allow the inferencing. Is there a workaround to this?
Hi, I'm having a problem in setting base point in using move tool. when i single click near the object it dose'nt create a base point.
ME TOO
thanks a milion this helped me a lot :)
Hi, i am currently using skp 2021and i am facing huge problem just because multipy option is not working..... the one with Divide is working but dur to the accuracy of the measurement its just useless
What can i do?.... Is there any option where we can fix this?
Does making a group work on the free version? I don't see any details in the outliner tab on my desktop. Thanks
Grouping/Components does - for some reason the actual outliner has been made a part of the paid online version
@@Thesketchupessentials it’d be nice if they let me know that important feature isn’t on starter free version
Than you
Hello sir ..,kindly tell me which video to watch after this video ,thank you .
Thank you so much for explaining so many amazing tips! ... When I wanna do the (*5) or (/5) on my Sketchup 2022, the command isn't working!
hi, thank you for the very informative video
i have two questions please
when applying materials to my view they just appear like plain colors with no textures! why is that happening?
the second thing is that on the left tray the out liner option is not there
am using a trial version ,,,,, does this have anything to do with it?
thanks in advance
thank you very much .
You are welcome!
which is the next video? like Part 4?
Bro how do u copie n paste em all beside eachother perfectly
I'm enjoying this tutorial series, but I cannot get this Part 3 video to play. It never loads. I can play any of the other videos just fine. Not sure what the issue is. I hate to skip a lesson, as I really want to learn proper.
I'm unable to modify my object when it's in a group or a component .
What is the difference between explode and ungroup, please?
Not really much of a difference on that one
I know this tutorial is for the desktop version, but I am trying to manage groups on the free web version. I see a place to create a group, but I don't see where I can retrieve a group I made earlier, or to select a group. (Yes, I see components.) Is this function available on the free web version?
wondering why when I make a component other copies doesn't change simultaneously ?
HI there, what if Make group isn't an option when i right click or when I click edit?
Why don't I have the "outliner" tool?
I do not have the outliner in my default tray. In fact i do not have any option after scenes.
Take a drink every ti he says “to stay super organized “
Hi Justin
Outliner tool is not available in 2021 Sketchup. whats the substitute? Thanks
It definitely is...
@@Thesketchupessentials hello Justin , your tutorials are the main reason I stuck it out with the program. Thanks a million. Is there a GROUP heading in the 2021 tray? Cannot find mine. thank you so much.
@@geraldrazah1456 No - there's a component heading, but not a group heading
Sir，I got a warning : " a component with that definition already exists", and when I edit my component or make unique then edit them, they don't make a change. Only when I make the component(with same name) a second time(still gets warning) will it overwrite the original components and apply my change. What can I do about that?
where can I find layer tool in this version??
They're called "Tags" now
@@Thesketchupessentials thank you so much... your videos are very helpful
I don't understand in the minute 20:35
What exactly don't you understand?
i find that ctrl c ctrl v is better in my opinion
i cant type slash or "times" key in this , help me
Move tool is not working, when gave a specific distance.
The God Bless Youuuuuuuuu
Please Help!!! .make group and make component buttons are greyed out and now I'm not able to create them. Upgraded to Sketchup 2021 today. Installed some extensions. Everything OK tillen the group and components buttons greyed out. Anyone has a solution?
After a restart, I got them back working.
Sir, how to make copy.
yeahh im so tired
first you move, then press ctrl to keep a copy in its original place, after you define the space between them " 1 meter then press enter " if you want 3 copies after done that, just type "3x" (or times 3)
interesting
best
I tried mine didn't work
Your...what didn't work?
Hhhuwattsap Guys!
Lol
Appreciate it buddy thanks
No worries!