Man I been looking for equal length on a ls s10 sounds amazing, thanks for the video I'll be copying your exhaust at up lol. What trans crossmember is that? How's Clarence from the driveshaft side and to the road
Thanks man After I got it all done I found that if I Jack the truck up the rear suspension sag will cause the drive shaft to bottom out on the exhaust which hasn’t been a problem yet driving just when I Jack it up to service stuff lol It barely hangs down under the frame rails maybe 2” at most The crossmember is a weld in speedway motors kit www.speedwaymotors.com/Speedway-Universal-4-Inch-Drop-Tubular-Transmission-Crossmember-Mount,4325.html
Trucks so light that it still has as much bottom as a stock 5.3 pretty much You can be in 2nd at 3000rpm and roll on it and it will break loose at 5000rpm almost like a light switch lol
@@lumpyswoodworks nope it’s shorties Tbss intake 92mm throttle I ported my 862 heads pretty good but I don’t have any proof I gained anything over stock 862s but I’d like to hope so lol
@@lumpyswoodworks can’t go wrong with the spintechs I gotta get some longtubes but I can’t make my mind up if I should spend the money or eventually go turbo and not necessarily need em
@@Ls_swap211 appreciate you big time man. I just put a lm7 in a stepside obs already cammed with longtubes just haven’t found the right exhaust till now thank you
@@Ls_swap211 hey man what’s the full exhaust set up? What size tips, I have schoenfield longtubes and am about to order everything else thanks in advance.
@@motolifestyle1550 Amazon shorties with 2.5” collector them each side is full 3” back X pipe and both spintech 6000 mufflers coming right off the X Finished out with 3” no tips yet Try to keep it all equal length I’ll try post a pic or thumbnail to this account or video
Love your truck sounds great i have a 99 gmc sierra with 5.3 and want to upgrade my truck like yours nice truck
Thanks
It’s a job and a half but it’s fun at the same time lol
Can you please do a build video of the S10 and a breakdown of the exhaust setup?
As soon as the weather breaks and the snow goes away I will do one no problem
Man I been looking for equal length on a ls s10 sounds amazing, thanks for the video I'll be copying your exhaust at up lol. What trans crossmember is that? How's Clarence from the driveshaft side and to the road
Thanks man
After I got it all done I found that if I Jack the truck up the rear suspension sag will cause the drive shaft to bottom out on the exhaust which hasn’t been a problem yet driving just when I Jack it up to service stuff lol
It barely hangs down under the frame rails maybe 2” at most
The crossmember is a weld in speedway motors kit
www.speedwaymotors.com/Speedway-Universal-4-Inch-Drop-Tubular-Transmission-Crossmember-Mount,4325.html
th-cam.com/video/Lqjlhz0-evM/w-d-xo.html
This video of my oil change kinda shows more of the exhaust clearance
@@Ls_swap211 thanks man I checked out your other video exhaust set higher the I'd think, take them caltracks before anything. Keep up the content
Hows it drive? Michigan motorsports told me that cam in my s10 would be sluggish below 5,000 rpm. Im running nv3500 5 speed in mine also.
Trucks so light that it still has as much bottom as a stock 5.3 pretty much
You can be in 2nd at 3000rpm and roll on it and it will break loose at 5000rpm almost like a light switch lol
@@Ls_swap211 are you running long tube headers?
@@lumpyswoodworks nope it’s shorties
Tbss intake
92mm throttle
I ported my 862 heads pretty good but I don’t have any proof I gained anything over stock 862s but I’d like to hope so lol
@white_ltz211 just ordered my hedman 45900's today and the spintech 6000's
@@lumpyswoodworks can’t go wrong with the spintechs
I gotta get some longtubes but I can’t make my mind up if I should spend the money or eventually go turbo and not necessarily need em
Which SpinTechs are these?
6000 series
What’s the part number for this muffler thanks in advance
www.summitracing.com/parts/sih-6441
I bought 2 and they are right in front of the 3” X
@@Ls_swap211 appreciate you big time man. I just put a lm7 in a stepside obs already cammed with longtubes just haven’t found the right exhaust till now thank you
@@motolifestyle1550 try your best to get it equal length and you’ll be good 👍🏻
@@Ls_swap211 hey man what’s the full exhaust set up? What size tips, I have schoenfield longtubes and am about to order everything else thanks in advance.
@@motolifestyle1550 Amazon shorties with 2.5” collector them each side is full 3” back X pipe and both spintech 6000 mufflers coming right off the X
Finished out with 3” no tips yet
Try to keep it all equal length
I’ll try post a pic or thumbnail to this account or video