There, I said it. It's going to be a luxury RV! And we start with building the kitchen. Lots of challenges but it might just still work out in the end.
😮 WOW. It literally looks like a unit you could buy from a professional interior fabricator. I had a stupid idea for the loose utensils. Stick a couple of weak magnets under the drawer base or line the inside with a soft fabric, then they won't rattle during drives on rougher terrain. 😅 Cannot wait for the next episode Danie, always excited to see your creations ! 👍🏽 Thanks for sharing.
Danie - Thought at first the color combination was a bit bold, but it works once you put it in place. Your piping arrangement is going to be tricky, but can be done. Will take some very precise measuring as you do not have much head room below the sink to get a P trap in for the drain, plus flexible hose to the tank. Waiting to see how you cover this. One thing I have been wondering about is how you are going to seal the sides so that when the side extensions are fully extended there is no air gap. Another one I am waiting on to see what you come up with. Lastly, how did you lose the prop shaft??? 🤣😂 I have lost nuts and bolts, keys, and small parts when rebuilding a car, but a prop shaft is in new territory, LOL. Hopefully it is safely stored under some of the material laying around the shop and you won't need to have a new one fabricated.
Hehe. Loosing something this big from the face of the earth was a first for me too 😂. I have a plan (on paper) for sealing the motorhome but only time will tell if it works.
I agree: WOW. Looks great! However, I'd be concerned about the PVC/foam material being stiff and strong enough to withstand an earthquake while loaded with pots, pans, cans of food, microwave, etc. Towing an Airstream trailer for five years now I've learned that the trailer undergoes a constant earthquake while in motion, particularly over pot holed roads. We're often tightening screws, replacing cracked hinges, and replacing popped rivets due to the earthquakes. Not sure if your choice of material is up for that, but I hope you prove me wrong. Cheers!
So far I could find out the pvc is stronger than conventional chip board and I bond all panels in an effort to reduce any panels coming undone. But yes your earthquake analogy is something that is constantly in my mind. Only time will tell how much breakages I'll have to fix once in motion 🤣
Hi danie ,i have an idea for a potential build ,maybe you could build and old le mans car like the porsche 917 or mercedes clk gtr/clr and mazda 787b , i would really love to see it , if you cant well then maybe do something similiar if you'd like ,love the videos ,keep up the good work ❤
Danny broer 👌🏼 could have saved on weight by double pvc board and edging for the top, that counts are heavy I know, and maybe could have beveled the draw fronts at the bottoms or top to open the draws to eliminate the handles, which is phasing out, just my 2 cents broer 🙏🏼 looks very good though 👊🏼
Hello maat, I always wanted to build a Ferrari F40 but hate working with fibreglass. Also the Ford GT90 will be a great project.So think about it . I am thinking of a aluminium chassis ala Jean Fourie style. I honestly think it is a better way to build a chassis with 5083 aluminium.
Hello maat, Carbon fiber hier in kangaroo land is moer duur en Ek stem saam met die 5083 aluminium vir die chassis.Ek het n engine cradle by Jean Fourie gekoop vir n Ford GT40 projek van n welbekende persoon . Die glasvesel “body “ is verstriklike swak gehalte. Ek is Besig met n hofsaak teen die firma.
@@BroughBuilt,Ek is in WA en Suid Van Perth. Sal jou graag wil ontmoet as jy dalk n draai in WA kom maak. Is daar n ander manier om in kontak met jou te kom as met TH-cam?
@@mikeleonard8031 ons gaan ongelukkig nie daai kant toe nie maar indien wel kan jy my op Facebook of Instagram private messenger kontak. Soek net die BroughBuilt bladsy.
aga nee man.................I've been wondering what you've been up to and YT hasn't been giving me updates on your page....bastards. It seems that I've missed two episodes.
Impressive! Interested to see how you make all the drainage work
I realy, REALY, like this build ! You make it look so easy and yet so beautiful. 👌
Care to make one for me next? 🤗
Sure! So long it's less complicated than this one 😁
Holy schnikes that looks awesome! I confess I thought you'd need a huge oven to heat and bend the PVC evenly, but you pulled it off; kudos!
Thanks. It was a gamble but worked out well in the end
😮 WOW. It literally looks like a unit you could buy from a professional interior fabricator. I had a stupid idea for the loose utensils. Stick a couple of weak magnets under the drawer base or line the inside with a soft fabric, then they won't rattle during drives on rougher terrain. 😅 Cannot wait for the next episode Danie, always excited to see your creations ! 👍🏽 Thanks for sharing.
Awesome idea !! I'm going to pursue the magnet idea for sure 👍
Danie - Thought at first the color combination was a bit bold, but it works once you put it in place. Your piping arrangement is going to be tricky, but can be done. Will take some very precise measuring as you do not have much head room below the sink to get a P trap in for the drain, plus flexible hose to the tank. Waiting to see how you cover this. One thing I have been wondering about is how you are going to seal the sides so that when the side extensions are fully extended there is no air gap. Another one I am waiting on to see what you come up with. Lastly, how did you lose the prop shaft??? 🤣😂 I have lost nuts and bolts, keys, and small parts when rebuilding a car, but a prop shaft is in new territory, LOL. Hopefully it is safely stored under some of the material laying around the shop and you won't need to have a new one fabricated.
Hehe. Loosing something this big from the face of the earth was a first for me too 😂. I have a plan (on paper) for sealing the motorhome but only time will tell if it works.
I agree: WOW. Looks great! However, I'd be concerned about the PVC/foam material being stiff and strong enough to withstand an earthquake while loaded with pots, pans, cans of food, microwave, etc. Towing an Airstream trailer for five years now I've learned that the trailer undergoes a constant earthquake while in motion, particularly over pot holed roads. We're often tightening screws, replacing cracked hinges, and replacing popped rivets due to the earthquakes. Not sure if your choice of material is up for that, but I hope you prove me wrong. Cheers!
So far I could find out the pvc is stronger than conventional chip board and I bond all panels in an effort to reduce any panels coming undone. But yes your earthquake analogy is something that is constantly in my mind. Only time will tell how much breakages I'll have to fix once in motion 🤣
Hi danie ,i have an idea for a potential build ,maybe you could build and old le mans car like the porsche 917 or mercedes clk gtr/clr and mazda 787b , i would really love to see it , if you cant well then maybe do something similiar if you'd like ,love the videos ,keep up the good work ❤
Danny broer 👌🏼 could have saved on weight by double pvc board and edging for the top, that counts are heavy I know, and maybe could have beveled the draw fronts at the bottoms or top to open the draws to eliminate the handles, which is phasing out, just my 2 cents broer 🙏🏼 looks very good though 👊🏼
Looking good! Going to be a nice interior!
Dit is 'n pragtige kombuis! Mal oor die kleure. Wens mense kon dit in die werklike lewe sien.
Hello maat, I always wanted to build a Ferrari F40 but hate working with fibreglass. Also the Ford GT90 will be a great project.So think about it . I am thinking of a aluminium chassis ala Jean Fourie style. I honestly think it is a better way to build a chassis with 5083 aluminium.
Sounds like a dream project, but if I do an F40 it would be made out of carbon and cevlar. Check out our lates build, we're using 5000series ally
What will be your next project?A Ferrari F40 or a Ford GT90.I will be interested to buy a body from you should you ever build one of them.🇿🇦🇦🇺🇬🇪🇷🇺🇷🇺😁
I'm currently considering my next build If you're looking for a body. 😎
@@BroughBuilt , I will discuss it with you at a later date and more privately 😁🇿🇦🇦🇺🇬🇪🇷🇺🇷🇺
Your drawers seem a bit of a disaster waiting to happen Don, too big mate, SWMBO (She who must be obeyed) is likely to over load them.
SWMBO 🤣. I hope they'll be strong enough. Alternatively I can reinforce them by adding ribs on the inside.
Hello maat, Carbon fiber hier in kangaroo land is moer duur en Ek stem saam met die 5083 aluminium vir die chassis.Ek het n engine cradle by Jean Fourie gekoop vir n Ford GT40 projek van n welbekende persoon . Die glasvesel “body “ is verstriklike swak gehalte. Ek is Besig met n hofsaak teen die firma.
Hi daar. Sien jou boodskap. Sal graag ook eendag n GT40 wil bou. Ons vlieg vandag Auz toe (NSW). Baie nuuskierig om te sien wat die ouens daar aan vng
@@BroughBuilt,Ek is in WA en Suid Van Perth. Sal jou graag wil ontmoet as jy dalk n draai in WA kom maak. Is daar n ander manier om in kontak met jou te kom as met TH-cam?
@@BroughBuilt is daar n Mainer om jou te kontak as jy hier in Oz is Dan kan ons lekker gesels.
@@mikeleonard8031 ons gaan ongelukkig nie daai kant toe nie maar indien wel kan jy my op Facebook of Instagram private messenger kontak. Soek net die BroughBuilt bladsy.
@@BroughBuilt Hello Danie, wanneer land jy in Australia?As jy in Sydney is Dan is dit twee ure verskil.Sal jou kontak.
aga nee man.................I've been wondering what you've been up to and YT hasn't been giving me updates on your page....bastards. It seems that I've missed two episodes.