I will be doing soon a brake pad replacement on my friend's Tracer 700 which has very similar brake setup to the MT 07. I was looking for a brake job video but instead stumbled onto this. I now know exactly what to do. I thoroughly enjoyed this. Thank you!
My front wheel doesnt spin as it should,it spins but doesnt make a whole circle it like does half circle then stops,is it possible that the problem is caused by the brake pads?
@@GLAESER09 Front may just have what's called a bearing spacer. Do you hear any noise from the front when it's rotating or when you're riding like a BB spinning around inside a can? There could also be some warping of the brake rotors if you have a lot of miles on them. But you should keep in mind that a motorcycle wheel won't spin freely from your hand spinning like you would expect a bicycle wheel to do. The loads and the lubricants are different for a motorcycle wheel and it's bearings.
@@gregorylagrange i can hear the exact same noise from my rear tire as wel l but the rear spins smoothly and stops when it should,i have a feeling that the front loosens up a bit when motorcycle is started and sit on,brakes and everything else work fine idk if there is anything wrong with the front wheel or not but i dont think it should spin that hard no matter if the bike is started or not,btw during riding u can’t feel anything stopping the fromt wheel so.. but after droping it from wheelie u hear like a little scratch when the front wheel goes down idk if thats normal or not xd
I will be doing soon a brake pad replacement on my friend's Tracer 700 which has very similar brake setup to the MT 07. I was looking for a brake job video but instead stumbled onto this. I now know exactly what to do. I thoroughly enjoyed this. Thank you!
Never thought I would find a video of a brake pad change satisfying 😂👍
Bro went the extra mile here! This is what a bike shop won’t do. Respect
Bit of grease back on the pistons before you push them in to fit new pads does no harm but this is professional!
This is like moto asmr
Loved how simply made it!! What torque setting did you use in NM
no messing about, good video, and shows exactly what to do, thanks, next video? how to stop your shoes SQUEEKY on the floor.
Nice video, how many Nm did u fasten it with?
You should hold front brakes lever tight when you tightening up brakes to let pads lining correctly
This was perfect! thanks.
What stand is that?
Thanks for the video. Exhaust sounds good. Link please
Excelente!!!! 👏👏👏👏👏
how many ft lbs did you tighten the bolts to?
Nice! How about the rear brake change lol. Thanks for the video.
You should put a light smear of copper grease on the back of the pads before inserting them.
Please can you link the red stand of your bike i want to buy same .. regards
Hello its and Abba stand, it's pretty useful 👍
My front wheel doesnt spin as it should,it spins but doesnt make a whole circle it like does half circle then stops,is it possible that the problem is caused by the brake pads?
Hello, it could be the brake pistons binding or your bearings are shot.
@@CarlosGarcia-lx6qn the axle has nothing to do with it,right?
@@GLAESER09 Front may just have what's called a bearing spacer.
Do you hear any noise from the front when it's rotating or when you're riding like a BB spinning around inside a can?
There could also be some warping of the brake rotors if you have a lot of miles on them.
But you should keep in mind that a motorcycle wheel won't spin freely from your hand spinning like you would expect a bicycle wheel to do.
The loads and the lubricants are different for a motorcycle wheel and it's bearings.
@@gregorylagrange i can hear the exact same noise from my rear tire as wel l but the rear spins smoothly and stops when it should,i have a feeling that the front loosens up a bit when motorcycle is started and sit on,brakes and everything else work fine idk if there is anything wrong with the front wheel or not but i dont think it should spin that hard no matter if the bike is started or not,btw during riding u can’t feel anything stopping the fromt wheel so.. but after droping it from wheelie u hear like a little scratch when the front wheel goes down idk if thats normal or not xd
@@gregorylagrange thanks for answering xD