How to Replace Front Lower Ball Joint 2004-2009 Toyota Prius
ฝัง
- เผยแพร่เมื่อ 4 ก.ย. 2024
- Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASB...
This video shows you how to install new, quality TRQ ball joints on your 2004-2009 Toyota Prius. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius
Tools you will need:
• Pry Bar 1aau.to/oXx/1AX...
• 10mm Socket 1aau.to/objQ/1A...
• 17mm Socket 1aau.to/obEX/1A...
• 19mm Socket 1aau.to/oanF/1A...
• 21mm Socket 1aau.to/oanF/1A...
• 30mm 12-Point Socket 1aau.to/oaf/1AA...
• Pickle Fork
• Ratchet 1aau.to/obIE/1A...
• Socket Extensions 1aau.to/obEX/1A...
• Block of Wood
• Gloves 1aau.to/oaoc/1A...
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack 1aau.to/oabR/1A...
• Hammer
• Jack Stands 1aau.to/oYM/1AX...
• Pick 1aau.to/oSF/1AX...
• Pole Jack
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Appreciate the video. You guess post alot of useful videos!
+@FML.P.J Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thank you for the video, helped a lot. gonna try it today
I have problems with the minute 4:01 . I think the shield is causing noise with the axle. Is it possible to drive without the shield? I can't seem to put it back correctly.
thank you