Mercury 200 Water Pump Repair | Mercury 200 Verado Water Pump Repair | Boats.net
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- There are two versions of the Mercury 200 water pump kit, and you’ll need to choose the best one for your motor:
Mercury outboard water pump repair kit with housing: www.boats.net/product/mercury...
Mercury outboard water pump impeller repair kit: www.boats.net/product/mercury...
See how to repair the water pump on a Mercury 200XL Verado in this video from Boats.net. As you can see above, there are two kits offered to do this job. You’ll have to make an assessment as to which kit you’ll use, but the primary drivers will be the condition of the water pump housing and which O-rings and seals you need.
You’ll need to remove the lower unit on your Mercury 200 to access the water pump. Here’s how: • Mercury 200 Lower Unit...
With the lower unit removed, John will show you how to remove the water pump and then perform an impeller replacement on your Mercury 200. Then, we’ll assemble the water pump: we’ll position the gaskets and wear plate and then get the impeller and housing back on.
See where we’re working in this Mercury 200 Verado water pump diagram: www.boats.net/catalog/mercury...
Read how to do this job step by step: www.boats.net/blog/mercury/20...
VIDEO HIGHLIGHTS:
Removing extension - 1:25
Removing water pump housing - 1:45
Disassembling water pump - 2:40
Reassembling water pump - 3:10
Installing water pump housing - 4:25
Replacing O-rings - 5:40
Find Mercury outboard parts here:
www.boats.net/catalog/mercury...
Talk to us:
Twitter: / boatsnet
Facebook: / boats.net
Instagram: / boatsnet
In the video we’re working with a 2009 Mercury 200 XL Verado 4-cylinder outboard motor, but you may have similar steps for your Mercury outboard. If you’re not sure whether these steps apply to your motor, leave a comment and we’ll get back to you.
RELATED VIDEOS
Mercury 200 Verado oil change:
• Mercury 200 Lower Unit... - ยานยนต์และพาหนะ
Wow I’ve serviced my cbr following your clips just came across this for my mercury, your clips are the best on TH-cam I’ll do my impeller with confidence tomorrow after watching you 👍
thank you
Excellent job
Where's the video of you hunting down and extracting the torn impeller fragments from the cooling passages?
I appreciate the simple, concise explanation. Thank you for these videos!
Nice video sir...
What a nice vedeo sir tnks a lot..
great video is it the same procedure to replace the impeller on a 150 verado???
Are you supposed to put the boat in neutral or forward gear before dropping
Hi, thanks for yoir videos. 1 question please. Is it normal that water comes out from behind the oil draining plug when you start the motor with headphones?? Thanks
i took my boat on the lake today, that water was very muddy. after got home and tried to clean the engine, i don't see the water peeing from the engine. i thing it's clogged and how to or what should i do?
How do you remove the white gear case shaft seal at 3:15 seconds? No one on you tube has taken it this far.
Excellent video, thank you very much. One question. My kit came with an extra little O ring, small like a pencil, any idea what that might be for?
A rubber o ring or fiber gasket type O ring?
Hi. You need a workshop manual to build a 1980 hp 175 V Mercury engine (V6). Would you be so kind as to send it to me? From already thank you very much.