Video was extremely helpful, thank you. Some recommendations (2020 Charger) : On the rear, when you pull back the bumper, you will also notice an additional bolt at the bottom by the removed clips. It's 9/32 approximately and looks like it's holding a diagonal piece. When you remove this, you gain about another six inches of flexibility for the bumper to pull back to get to the screws. Purchase some torque star sockets, as using a lengthy screw driver creates a PITA situation VS. using a ratchet, T25 bit, and a small right angle approach. When doing the front, rotate the steering wheel to the opposite side for more wiggle room.
I didn’t buy this brand, so I’m not sure if it requires the same or not, but did use this video to install my smoked white LEDs (front and rear) but I had to use the T25 screw to thread the new LED side marker lights. This video was extremely helpful
Been asking for these for a few years ever since I got my 18 and replaced the interior and headlight bulbs with DD products. Literally bought a set off Amazon Monday and I get the email about these today...smh.
Idk if I have this brand, I bought my charger pre owned with them already installed, I was having issues with my tpms driver from not reading all the time, dodge told me it was the aftermarket led lights causing this. Would you consider that to be true?
Hey there! If they are our lights, they will have a little DD stamp in one of the corners. If they do, please reach out to us at contact@diodedynamics.com, or give us a call at 314-205-3033 M-F CST.
Yeah one thing I’ve learned after owning a Camaro, two Mustangs and now a Charger is that these types of “easy” installs NEVER go as quickly as they make it look like.
That rear light are so fuk@## painful to remove, anyway don't know if this problem are for anyone But don't know if this brand or ALL the brand but I just have my second problem in 3 years with this type of lights I bought my from a different company and the first time was in the front and now my rear right side marker gone together with the right taillight. I read that apparently this lights create some kind of interference and knocked out the taillighs. I got crazy looking for information and I came across with a few videos about this. I'm piss and disappointed because this ARE THE LIGHTS THAT DODGE SHOULD INSTALL in our vehicles from FACTORY and not this ridiculous stupid one Fucking Dot. Come on dodge!! This lights that we all want and we are willing to break or hands specially on the rear installation are beautiful brighter at night and the really make the car looks incredible better than the stupid dot. Just want to you guys know if you have a problem in a long run there are a big possibility that this is the problem, and you may ended reinstalling back those ugly one dot lights.
Hey Orlando! Are you saying that the rear sidemarkers you installed for us had caused interference with your tail lights? We've never heard of this issue.
Yes, these are price for quality compared to cheap options on the market with low performance and reliability. Our product is designed, engineered, tested, and assembled in the US using the highest quality manufacturing processes and components. th-cam.com/video/tfBnCliLniM/w-d-xo.html
Mine lasted about 3 weeks before they messed up. Passenger front went completely out and driver rear light is only halfway lit. Won’t recommend these to anyone.
Hi Nick! That sounds super strange. We offer a three year warranty for any freak factory defect on these. Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to send you replacements.
Finally someone who gets straight to the point. Thank you!
was having trouble removing the oem markers in the rear thankfully came across this video, thanks!
Glad it helped!
Video was extremely helpful, thank you.
Some recommendations (2020 Charger) :
On the rear, when you pull back the bumper, you will also notice an additional bolt at the bottom by the removed clips. It's 9/32 approximately and looks like it's holding a diagonal piece. When you remove this, you gain about another six inches of flexibility for the bumper to pull back to get to the screws.
Purchase some torque star sockets, as using a lengthy screw driver creates a PITA situation VS. using a ratchet, T25 bit, and a small right angle approach.
When doing the front, rotate the steering wheel to the opposite side for more wiggle room.
I didn’t buy this brand, so I’m not sure if it requires the same or not, but did use this video to install my smoked white LEDs (front and rear) but I had to use the T25 screw to thread the new LED side marker lights. This video was extremely helpful
Where can you get a white leds ?
This freaking guy…..makes it look so damn easy lmfao
This video great i didnt want to remove the rear tire to do this. The front is a hassle but can be done.
How great you guys make them AFTER I get rid of the charger
We're sorry to hear that!
Diode Dynamics they look amazing tho. I’ll be sure to tell all my charger buddies to stop going to oracle and get these from you instead
@@grimeyfuture Thank you for the kind words and support!
Thanks you !!! Just put mines in myself from this video !!!
mines?
Been asking for these for a few years ever since I got my 18 and replaced the interior and headlight bulbs with DD products. Literally bought a set off Amazon Monday and I get the email about these today...smh.
Rear marker removal should be the same process for a 2016 chrysler 300 right?
It should be similar. We do know the back of the housings do have different clips, so please be aware of that!
@@diodedynamics swapped em on tuesday!! HUGE difference , thanks for the reply! take care
@@alexg9131 We're glad you're enjoying them! Thank you for your support.
Would the process be the same for a widebody charger? Thank you 😊
Yep!
Idk if I have this brand, I bought my charger pre owned with them already installed, I was having issues with my tpms driver from not reading all the time, dodge told me it was the aftermarket led lights causing this. Would you consider that to be true?
Hey there! If they are our lights, they will have a little DD stamp in one of the corners. If they do, please reach out to us at contact@diodedynamics.com, or give us a call at 314-205-3033 M-F CST.
If they are smoked, are they still red and amber?
Yep! The lights inside are.
@@diodedynamics awesome! Last question if i have the zl1 rock guards on…i have to remove them in order to get to everything for install correct?
@@Thetruth1120 You shouldn't have to. You should just have to loosen part of the fender liner.
th-cam.com/video/t7Q2t0H2Rjg/w-d-xo.html
Smoked is best you get a lot clarity on the led versus others it’s shows very clear on mine during the day even
peeling back the bumper is so stressful
It can be, however we do have a great number of authorized dealers and installers worldwide as well that could do it for you!
@@diodedynamics i managed to do it!! they look amazing 🙏 so much better than OEM
@@JuniorWA Alright! Glad it worked out for you!!
@JuniorWA how the hell did u manage to get the bolt out Jesus I'm struggling 🤣
Anything for 2019 / 2020 challenger??
Hey Joe! Unfortunately, we don't offer these for the Challenger. However, we do hope to offer them in the future!
ITS THE SAME FROM 2015 AND UP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Will local dealer have the 2015+ Dodge Charger LED Sidemarkers?
Hey Shane- they might! You can check our Dealer Locator Tool to check.
www.diodedynamics.com/find-a-dealer
Installed them , came out good looks awesome . But the install was hard for me 😅😂
Sorry to hear that! Glad you were able to get them installed
Yeah one thing I’ve learned after owning a Camaro, two Mustangs and now a Charger is that these types of “easy” installs NEVER go as quickly as they make it look like.
are this road legal?
Yes these are road legal! 🙌🙌
And it wasn’t no 3:15 to install this guy have someone do all the work pretty boys don’t get dirty….
I actually did install them! And thank you for calling me pretty.
Installed and love em
Thank you
That rear light are so fuk@## painful to remove, anyway don't know if this problem are for anyone But don't know if this brand or ALL the brand but I just have my second problem in 3 years with this type of lights I bought my from a different company and the first time was in the front and now my rear right side marker gone together with the right taillight.
I read that apparently this lights create some kind of interference and knocked out the taillighs. I got crazy looking for information and I came across with a few videos about this. I'm piss and disappointed because this ARE THE LIGHTS THAT DODGE SHOULD INSTALL in our vehicles from FACTORY and not this ridiculous stupid one Fucking Dot. Come on dodge!! This lights that we all want and we are willing to break or hands specially on the rear installation are beautiful brighter at night and the really make the car looks incredible better than the stupid dot. Just want to you guys know if you have a problem in a long run there are a big possibility that this is the problem, and you may ended reinstalling back those ugly one dot lights.
Hey Orlando! Are you saying that the rear sidemarkers you installed for us had caused interference with your tail lights? We've never heard of this issue.
No way they should be 200 dollars
Yes, these are price for quality compared to cheap options on the market with low performance and reliability.
Our product is designed, engineered, tested, and assembled in the US using the highest quality manufacturing processes and components.
th-cam.com/video/tfBnCliLniM/w-d-xo.html
Mine lasted about 3 weeks before they messed up. Passenger front went completely out and driver rear light is only halfway lit. Won’t recommend these to anyone.
Hi Nick! That sounds super strange. We offer a three year warranty for any freak factory defect on these. Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to send you replacements.
OP, did you buy these from diode dynamics? Or did you buy the Amazon ones?
@@leov36 yea. Hard to trust Amazon for certain types of products. Lots of scams and copycat versions