@@phillipthomas3824 I purchased the one titled "Vicrez Demon Wide body Fender Flares + Side Skirts vz102191| Dodge Charger 2015-2023" I think whats important is the "vz102191"
Okay great. Did you get the 305 wheels with the kit? Also have you had any problems when hitting bumps if so what would you suggest to avoid that..? How do you feel about 275s in front 305s in the back?
@@phillipthomas3824 I purchased the Vicrez rims but bought tires separately. My tires are 305's all around (Atturo AZ850 from eBay). I highly recommend the 305 and would not put the 275. I do have minimal rubbing on bigger bumps and would recommend cutting just a little further (horizontally) on the cuts. The height of the cut was enough just a very tad bit more both left and right could have been cut to avoid the little rubbing I have here and there
Waiting on my 19 scat pack and I’m definitely looping your video to install mines! You did awesome job and I can tell you really appreciate your car! 👏🏾👏🏾👏🏾
I have some video from when someone hit me and damaged the driver front panel that I want to show the repair how it came out. Also, eventually I will get back underneath and cut more off of my fenders so I was going to show how it pulls off with the 3M tape and reapplies
$2258 for body kit and rims, $900 for tires, $800 for paint, $230 for tire install, and some extra money on supplies to install. Came out to right at $4,300
Yea all of it depends on just how low you are paired with how bad your road situations are. I had minimal rubbing here and there but it certainly did rub
@Nate Nope, she drives straight as could be. The only thing I notice more since the wider tires tho is that Dodge camber in the rear. I notice even factory chargers and challengers have that slight tire tuck into the fenders wearing more on the inner tire than the outer. May eventually get that addressed
@@itz_drowsyyy223 rarely. And the little I’ve had only touches the tires without actually hitting hard or making marks on them. I will be getting under to cut again eventually and will post another video of that process of how to cut once the kit is already mounted. I’ve been telling people to not be scared to cut more on the original project. Kit hides the cuts anyway👍🏽
I dont, apparently the kit was supposed to come with it mine just did not so I made do with some from auto zone. I've only had to pull a panel back a bit to add some tape in one section on the rear panel. Light rubbing here and there but overall it's in the same exact shape as it was the day I installed
Great job man, I have a 21 scatpack and I'm going for the 700 flares only kit, if I may ask why buy side skirts? Are they not the same? My factory skirts off my scat look identical to those
Thank you! And sweet man, I haven't even heard of that kit yet. But as far as the side skirts, on the Vicrez kit, the flares have a flat step to make a fluid transition to the fender flare. Without the new rocker panel the fender flare sort of just hovers over the OEM flare and doesnt tie into the car at all. Other kits may look different but for the Vicrez kit this was the way to go to make it look more factory
Yea I seen the flare plus side kit skirts kit I was wondering how my flare only install would transition onto my oem side skirts dam might as well go the full option it was like a 300 difference only 🤙thanks for the info
@@Memogarcia2007 def. I have the 305's all around on the 20 x 11" rims. If your car is lowered you will rub tho, which is why the option is cut your fenders is the preferable one. If you cut enough and do it right the first time you wont have any issues and no regrets. I have minimal rubbing and its only when the roads are so bad it makes my suspension go down more than normal. And even then the rub is light, doesnt even mark the tires. That being said I will eventually cut a little more when I know the rub is happening
Hello sir, first off nice job on the swap l’m doin my swap now and my tires front tires are rubbing on the backside are yours doin same or did U trim or anything please I’m desperate need of information thank u god bless!!
You must be a bit lower than I am. My car is on H&R lowering springs. With the cuts I made in the video, the car does not rub 98% of the time. I only get light rubs on bad roads and things like that. You should be able to cut more on both the car and the kit to eliminate the rubbing you are getting. Some guys bag these cars on these kits so I know its possible to get it to not rub for you
Thank you! No spacers! The rims purchased from Vicrez are offset on their own by -2.5mm which is how it's getting this stance I assume. Not just a normal 11 x 20 rim, but one with this offset. That rim mounted up with the 305's give it the factory look
No issues with turning. On a typical drive I don't normally rub but it does rub lightly when there's a bad pothole or big transition in the road. I will eventually cut more, it just hasn't been all that bad so I'm taking my time.
@@charliebernis177 ok. If I’m not planning on lowering the car you think I’ll get away without any rubbing in the rear without cutting?, with the 20x11 wrap in 305/35 tire?
@@biggadread8286 which model do you have? some come lower than others. If you have an SXT, GT, or even RT at factory height you should be ok without cutting
Looking fire my guy and i have question if i go widebody what size wheels do i need with it because stock scats comes with 20x9.5 so what wheels size ?
If you have a charger that you are adding the widebody to, the wheels not only need to be 20 x 11 (all 4 wheels) but mainly the -2.5mm offset is whats important. This will give it the right stance and fitment
This dude just save a lot of people thousands. And he did a perfect job.
Appreciate the words 👊
I was really expecting you to miss rust proofing your cuts, you didn’t. Impressive work.
Thank you Rusty!
It looks like it came like that from the factory. Good job👍🏻
Great compliment, appreciate that!
Take notes youtubers, this is how a video should be done! 🎉
Thank you for the compliment!
Hey I’m thinking about do it to my 22 R/T just bought it for graduation a couple months ago. What kit did you use exactly. This looks perfect
@@phillipthomas3824 I purchased the one titled "Vicrez Demon Wide body Fender Flares + Side Skirts vz102191| Dodge Charger 2015-2023" I think whats important is the "vz102191"
Okay great. Did you get the 305 wheels with the kit? Also have you had any problems when hitting bumps if so what would you suggest to avoid that..? How do you feel about 275s in front 305s in the back?
@@phillipthomas3824 I purchased the Vicrez rims but bought tires separately. My tires are 305's all around (Atturo AZ850 from eBay). I highly recommend the 305 and would not put the 275. I do have minimal rubbing on bigger bumps and would recommend cutting just a little further (horizontally) on the cuts. The height of the cut was enough just a very tad bit more both left and right could have been cut to avoid the little rubbing I have here and there
bro you did that not gonna lie
appreciate that!
Is that a compliment? Man I’m confused
@@love2fight205 it is where I'm from lol
@@love2fight205 😂😂
Clean charger
driveway bodywork makes it so much better, makes some of us think we could give it a try on ours rides but probably not :P
Lol thank you! If I can do it you can too 👊
Man you made that look effortless lol solid job
I appreciate that!
Waiting on my 19 scat pack and I’m definitely looping your video to install mines! You did awesome job and I can tell you really appreciate your car! 👏🏾👏🏾👏🏾
I definitely do! Holler at me on insta if you have any questions before you start 👊
To those using the kits, especially the full kit with bumpers, know that you need new suspension or cut away fenders
Did you try it??
One of the cleanest r/t’s I’ve seen u gotta be pushing 400 hp by now
You joking right lol
@@michaeldelcid9033 🤣🤣 still a nice compliment tho
best charger rt i have ever seen, im getting one a the end of the year
Much appreciated! get you one 👊
Excellent body work and install of kit, it looks amazing and improved the cars look. Oh, nice music too it made the video.
Very much appreciated!
I built a wide body kit for my uncles 2015 RT. Turned out really good, but took me around 60 hours to complete. Wish I would've just bought a kit
Wow, that sounds cool tho. Would like to see how that turned out!
this vid made me smile at 3:40 this morning while i walked into work
🙌
🔥 … should get 315s for the rear will definitely look more aggressive
Might try that on my next set 😎
BRO THIS SHIT SO HARD 🔥🔥I was planing to do this but I might get the challly but I like the charger look too😭
Def get a charger
Get a charger fashoo, them challengers mad ugly imo😂
@@rsenszn not the widebody
@@rsenszn true
@@tokieoluv1372 I can give the widebody a pass
Real pro ! 💯🔥 you actually did a video from start to finish . Most videos I see , don’t . Looks 🔥🔥💯
Very much appreciate the compliment!
You did your thing brother just the video I needed to see to confirm. I need to add the widebody kit
Hell yea do it, thanks man!
What’s the tire set up you went with
@@Bruceafool Atturo Az850's - 305/35r20 on the Vicrez wheel
Great job, I definitely want it for my car!
👊👊👊
amazing work... you did it perfectly in the end
Very much appreciated!
So clean! Don't even need to get the wide body bumpers , saving $$$ on that🙌🏻
Exactly! Thank you 👊
Outstanding job. Love my wide body scat pack
Thank you sir!
Came out dope. One of the best videos out rn
Also, nice work and attention to detail.. I am going to have to have a shop install mine, I am not as slick.
Not a bad way to go! Def takes some commitment to time lol.
Nice!!! See that's how I need mines installed, with cutting in the fender so it won't hit when u put the 305s on it
Beautiful job, it looks amazing 👏 😍 👌
Thank you!🙌
Bravo 👏 I need to find me a tire setup on my truck on stock rims
I’m not paying the song no mind at all man lol I’m looking into buying a charger RT myself so I’m locked in to what you doing
i love the song choice btw. way better than some obnoxious music
Lol thank you!
Came out pretty clean.
Appreciate it!
Beautifully Done🙌 !!!
Much appreciated!
Came out Fabulous 👌🏾 👏.. Great Work
thank you very much!!
Job well done I'm speechless
Glad you liked it!
Fire vid 🔥, but what instrumental is this
Awesome job bro.....thats looks great....badass Charger....kool vid subbed 👍🏼💪🏽👊🏼💯🎯🔥💨
And for that I subbed back! Thank you!
@@charliebernis177 appreciate that bro 🙏🏽 💯
i can’t wait til i get mines i’m adding a wide body. & doing a swap
What you swapping?
@@charliebernis177 imma put the 6.4 in there
@@therealmaredadon3517 now we talking. that is all im missing and I need it
That shot look good !!
@@razeekguyton5774 👊🏽😎
🔥🔥🔥 Transformation!!
Any plans on uploading more ?
I have some video from when someone hit me and damaged the driver front panel that I want to show the repair how it came out. Also, eventually I will get back underneath and cut more off of my fenders so I was going to show how it pulls off with the 3M tape and reapplies
What was the total cost and you did a nice job
$2258 for body kit and rims, $900 for tires, $800 for paint, $230 for tire install, and some extra money on supplies to install. Came out to right at $4,300
Time to upgrade badges
Boy you snapped
Did you debadge?
@@derrickdesilva4205 I had takent the HEMI badge off and replaced it with the 345 sticker on the side but left the badges on the trunk lid
Love the wheels
Same, nice and deep
You did that sir....looks sick!!!!
Thank you!!
I need mine done now🤣🤣… how close are u to SC?
@@KM-xn5kj I'm a little ways away.. Louisiana!
Looks good I just hope it holes up in bad weather car washes
Mine in particular is garage kept and hand washed only so 😅
Looks oem to me!! Awesome work
Thank you!
clean as hell bro 🔥
hell yea I appreciate that 🤝
That's one of the best sports cars 😉 out there still I have 2012 TL fwd tech package straight sounds but I think my next SUV gonna be the dodge SUV
Excellent video man!!🙏🏾💪🏾🔥
Thank you very much! I actually referenced your video a few times before committing to the project 🤝
@@charliebernis177 That’s awesome! It turned out great for you man! Looks amazing!
Great video! Can you send link for kit? Just bout my scat and didn’t want to pay the extra for wide-body
I have a vicrez widebody kit, but have had major issues with rubbing trying to run 305s all around.
Yea all of it depends on just how low you are paired with how bad your road situations are. I had minimal rubbing here and there but it certainly did rub
Amazing work! What lower kit did You use ??
Thank you! I'm on H & R springs
@Nate Nope, she drives straight as could be. The only thing I notice more since the wider tires tho is that Dodge camber in the rear. I notice even factory chargers and challengers have that slight tire tuck into the fenders wearing more on the inner tire than the outer. May eventually get that addressed
@@charliebernis177 does your tires rub at all over bumps?
@@itz_drowsyyy223 rarely. And the little I’ve had only touches the tires without actually hitting hard or making marks on them. I will be getting under to cut again eventually and will post another video of that process of how to cut once the kit is already mounted. I’ve been telling people to not be scared to cut more on the original project. Kit hides the cuts anyway👍🏽
@@charliebernis177 where did you buy this kit from? I’m looking to do it for my 2016 hellcat
You have a link to the rocker panel clips. How was the kit held up? Car looks great btw
I dont, apparently the kit was supposed to come with it mine just did not so I made do with some from auto zone. I've only had to pull a panel back a bit to add some tape in one section on the rear panel. Light rubbing here and there but overall it's in the same exact shape as it was the day I installed
I take it the center caps from OEM wheels don’t swap into the vicrez wheels? I am about to order the 2020 widebody kit and wheels.
They claim to fit! I just haven't done it yet. Definitely needs them tho
so unique and cool
Awesome video!! Well done sir!!
Thank you much appreciated!
Bro you can do this as a side job….. so how much ?
Amazing job!
Thank you very much!
Clean
👊
It looks damn good. There goes the neighborhood for original Wide bodies owners🫡
Lol not sure about that, it's still an RT at the end of the day. Just makes it custom I guess👊
Car looks amazing 🤤 looks straight from factory , do you have spacers ?
Much appreciated! But nope no spacers, wheels are offset -2.5mm
@@charliebernis177do you have srt spindles? If not how are your 20x11 wheels infront not rubbing
@@GDinerothe rim itself has a 2.55mm offset which brings it away from the driving components behind the wheel
Very impressive.
How come yours look better then the factory widebody. Nice job
lol I wish! thank you 👊
That looks great, nice job!
Thank you very much!
Great job man, I have a 21 scatpack and I'm going for the 700 flares only kit, if I may ask why buy side skirts? Are they not the same? My factory skirts off my scat look identical to those
Thank you! And sweet man, I haven't even heard of that kit yet. But as far as the side skirts, on the Vicrez kit, the flares have a flat step to make a fluid transition to the fender flare. Without the new rocker panel the fender flare sort of just hovers over the OEM flare and doesnt tie into the car at all. Other kits may look different but for the Vicrez kit this was the way to go to make it look more factory
Yea I seen the flare plus side kit skirts kit I was wondering how my flare only install would transition onto my oem side skirts dam might as well go the full option it was like a 300 difference only 🤙thanks for the info
@@Memogarcia2007 yes def go with the skirts too! no problem 👊
Last question man lol will I be able to run 305s all the way around no rub?
@@Memogarcia2007 def. I have the 305's all around on the 20 x 11" rims. If your car is lowered you will rub tho, which is why the option is cut your fenders is the preferable one. If you cut enough and do it right the first time you wont have any issues and no regrets. I have minimal rubbing and its only when the roads are so bad it makes my suspension go down more than normal. And even then the rub is light, doesnt even mark the tires. That being said I will eventually cut a little more when I know the rub is happening
might have to take my car to u to widebody it for me it was flawless😂
👊👊
beautiful car
very much appreciated
That looks great man
Thank you I appreciate that 👊
Hello sir, first off nice job on the swap l’m doin my swap now and my tires front tires are rubbing on the backside are yours doin same or did U trim or anything please I’m desperate need of information thank u god bless!!
You must be a bit lower than I am. My car is on H&R lowering springs. With the cuts I made in the video, the car does not rub 98% of the time. I only get light rubs on bad roads and things like that. You should be able to cut more on both the car and the kit to eliminate the rubbing you are getting. Some guys bag these cars on these kits so I know its possible to get it to not rub for you
props to you for doing it... but once you cut into the car nope not for me... i couldnt hack up my ride like that... ill just stay skinny body...
Lmao I can respect that position
The guys at vicrez didnt cut the fenders on the challenger
🔥
You're very brave too
Yeah might just have to pay someone but looks dope ! 😂
Lol could always do that, thank you 👊👊
Very nice 👍🏽 job homie
Very much appreciated🤜
Great job and it looks good
Thank you! And same to you, you have the car I would love to have. So nice
I need the tires and that kit your using I’m finna go buy it mopar finna install it for me
Atturo tires, they are legit. And kit is from vicrez.com
I'm going to have to get me a stool like that just to clean the rims of all the brake dust
I actually like the song 😂
lmao I'm glad somebody does!
Man she looks real good 🔥🔥🔥❤️💪great job 🙌🤤
Appreciate that!!
Nice ! Which kit is this?
From Vicrez.com. The kit without the aftermarket widebody bumpers
Cleannn bro !!!
Appreciate that!
Where did you get the kit from
vicrez.com
Looks bad ass
appreciate it! I agree
Nice work! I got one on my challenger and now am intrigued, are you using spacers to bring the tires out more or just the 305/35R20?
Thank you! No spacers! The rims purchased from Vicrez are offset on their own by -2.5mm which is how it's getting this stance I assume. Not just a normal 11 x 20 rim, but one with this offset. That rim mounted up with the 305's give it the factory look
@@charliebernis177around how much did the rims cost you?
rims were around $1200 if I remember right @@Vendo-ml8xo
Thanks Broooo My Dream Car A WideBody😳🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
yessir mine too! 👊
Daaamn bro, looks fire!!! I love your wheeels and how they look, what are their specs? and where do i get them?
Thank you! Mine are 20" x 11" with -2.5mm offset. These are from Vicrez.com and specifically they are the "Hellcat Widebody Style Wheels"
@@charliebernis177 thanks boss
Very nice. Is your car lowered?, and if so do you have any rubbing at all on speed bumps or when turning?
No issues with turning. On a typical drive I don't normally rub but it does rub lightly when there's a bad pothole or big transition in the road. I will eventually cut more, it just hasn't been all that bad so I'm taking my time.
But yes, it's also lowered on H&R Springs
@@charliebernis177 ok. If I’m not planning on lowering the car you think I’ll get away without any rubbing in the rear without cutting?, with the 20x11 wrap in 305/35 tire?
@@biggadread8286 which model do you have? some come lower than others. If you have an SXT, GT, or even RT at factory height you should be ok without cutting
@@charliebernis177 I have the 329 scatpack
Great job, man. I am thinking about doing this to my 2015 Scat Pack. What is the exact kit # from Vicrez that you used?
Vicrez Demon Wide body Fender Flares + Side Skirts vz102191| Dodge Charger 2015-2022
was it stressful at all btw it looks amazing
Not really tbh just time consuming. The project went well just took lots of time to make sure I did it correctly
@@charliebernis177 thx for the response might have to buy one for my car when its delivered
Is there a reason you didn’t change the front bumper?
Personally didn't want to stunt too hard. Wanted a widebody but didnt necessarily want people to think it was something it wasnt
i think its funny whats concidered a widebody now a days lol
I don't make the rules, only try to play by them
Looks good!
Appreciate that!
Man where are u located. I want this done to mine as well
🔥🔥🔥🔥🔥
Good job 👏 👍 appreciate the video
Thank you kindly 👍
Inspirational.
nothing to it but to do it
good job, looks great
thank you sir!
By cutting the fender wouldn’t that weaken the structural durability and rigidness..???
I guess if you cut majority of the fender off, or around the whole fender well. Def not with the little I cut tho
Looking fire my guy and i have question if i go widebody what size wheels do i need with it because stock scats comes with 20x9.5 so what wheels size ?
If you have a charger that you are adding the widebody to, the wheels not only need to be 20 x 11 (all 4 wheels) but mainly the -2.5mm offset is whats important. This will give it the right stance and fitment
@@charliebernis177thanks man you answered my question with this as well
Decent!!!