Charger 15-23 Wicker Bill Install Guide | ZL1 Addons
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- This is our two-piece Wicker Bill for the Dodge Charger. Made of 3/16 Lexan with black sub wicker and a clear smoke center section. Comes with all mounting hardware and instructions.
Product Fits:
- Charger 15-23 SRT Hellcat, SRT, Daytona and Scat Pack
- Charger 20-23 Widebody (All but the Hellcat)
- Will NOT fit the new 2020 Charger Hellcat or 2021 Charger Redeye Widebody spoiler
Product Listing: bit.ly/3myufN5
We want to see how you drilled the wing and installed the screws❤
Just bought a wicker bill and this video is a great tutorial! Thank you
Just bought mine; thanks for black friday 20 percent off
Installed mine today. It looks good 👍🏻
Does this come with a rivet gun if not what rivet gun is that in the video?
They have a option where u can buy all the tools u need
Is this the standard, dark tint or polished one in this video?
Just beautiful .
Nice job looks good 👍🏼
I ordered mine but i guess the rivets and screws where lost or not packaged
How come regular RT isn't listed in fitment list? It has the exact same spoiler as the Daytona.
if it's the same exact thing then this will fit on ur RT...
I need this same one for my Daytona, what are the options? I'm a little confused, sorry..
Your Daytona has the same spoiler as the SRT, so you can choose the standard or the Stealth. Checkout the site for material options/choices. zl1addons.com/collections/dodge-charger-wicker-bills/products/wicker-bill-for-charger-spoiler-type-hellcat-srt-and-srt-scat-pac
Hi! I would like to get this wicker bill for my Dodge Charger 2021 Scat Pack. I see you guys are in California, I am actually not too far away. Will this wicker bill fit on my Charger Scat Pack?
Outstanding. Where are these installers located?
Threaded insert riveter
@@cooljs12I think he meant the shop.
What size is the riv nut gun tool?
Will this fit a 2023 GT?
Hello ... We have 2006 2 Top Banana Chargers R/T .. I am looking to a wicker bill on mine ... I have scoured the internet to see if I can fin a kit like this one but no luck ... Do you know if this setup will work on a 2006 Dodge Charger ??? Any hep would be greatly appreciated ... Sick Car by the Way
I want to put my dodge durango it is possible that the size will give my car?
So does that 1st hellcat spoiler piece just stick on with double sided tape? The ones on eBay are all stick on and that seems crappy. Is there a way to bolt it in? Or have someone put pressure on top while I screw a few screws in the bottom from inside ?
I lost a bolt due someone tampering with it one night do I need to get a whole new bill or can I just replace the bolt ?
Is this exact spoiler not available anymore on your website??
It is just bought one
Will this fit the 2020 GT?
It’s look phenomenal but aren’t you afraid to lose some speed? Corvette c7 also lost speed because of it
Still have my stealth wickerbill in the shipping box from February. Is this something I can install on my own? Not a single shop in my area knows what a wickerbill is or install it.
That is something you will need to determine based on watching this video.
Easy Peezy lemon squeezy
Will this fit a 2020 Dodge Charger R/T ?
Yes
Great tutorial.... just bought mine!!!
Where did you buy yours I’m trying to buy one. I already ordered the middle piece but I need the rest
juan vargas Zl1addons.com
onecarworld
Does severe weather mess up the wicker bill?
Where did talk find the river nuts for this ? I can’t find any
What is the size of drill bit you used
3/8"
What size is the rivnut? M5?
Serious question...the flat washer, does it go between the spoiler and the wickerbill or under the tapered plastic washer on the outside?
The flat washer goes between the bolt and the wicker bill.
Is that the 25% or %50 tint?
Thats nice 😎
I just need the ribnutts to instal it 🤣🤦🏻lost em 🤣🤦🏻
where did you get those different looking screw bolt washers that comes with a star head? whenever you order them i received mine with regular black washer and screw bolt
That is our stealth hardware.
Compatible for 2020 WB Scatpack Charger?
How much does this cost?
I have a 2012 r/t without a spoiler on it right now. Would a newer bill fit my car?
You would need a spoiler to mount the wicker bill.
I have the rivet gun but I can't find that other piece, where did you get it from??
Did you end up finding it? I can’t
If I decide to upgrade to the stealth hardware after it’s already been installed, can I just remove the standard hardware and put the stealth in or they wouldn’t work?
Yes.
What size is the drill bit ?
3/8" is what we suggest.
Question this one you installed in this video was it the Standard or Dark, also what's the difference between the Standard or Stralth
It was a polished edge, the difference between the Stealth, and the Standard is that the Stealth Wicker will fade into the edge of the spoiler, while the Standard is more of a squared off look.
@@zl1addons162 So the Stealth its much nicer correct?
Will this fit a 2019 sxt charger
Only if you have the SRT spoiler.
What kind of rev nut tool is that
It's our rivnut tool we offer.
Does automatic car washes kill the spoiler?
Thats what i want to know.
We suggest removing the wicker through auto washes.
ZL1 Addons ok thanks for the reply. I’m gonna buy a cordless drill so I can take it off for my regular automatic car washes I get 3 times a week
@@kevinbarrett2050 regardless of wickerbill or not . Dont take your car through an automatic car wash .
@@kevinbarrett2050 unless its 100% touchless
Where are you guys I need mine installed
Poway, CA
Help! What is the size of the riv nut itself?
1/4"-20
Just got a 2020 scat pack charger which version would work for me?
This will fit your vehicle.
Were can I go to install this
What size is the rivet gun
1/4"-20
1,000th like 🤘
does this fit the charger GT? i’m pretty sure it’s the same but i wanna ask to be safe
Ryan Dailey did you ever find out?
It will if you have the 1-piece spoiler.
Do u need that rivet gun or u can do it without that ?
Must use a rivnut gun to install the rivnuts.
@@zl1addons162 what size insert is needed for the rivet gun? And does it come with the rivet fittings? Thx
what material is it made out of?
We use Lexan to make our Wicker Bills.
Does it fit the 19 Charger RT?
If you have the 1 piece spoiler, yes.
Yes. 2019 R/T has SRT body style treatment
guessing that also goes for dodge charger rt 2020 ,
@@JohnSmith-nl2us
so the entire spoiler and wicker bill add on comes up when you open the trunk right ?
Correct
🤦♂️ that’s a pretty stupid question man. Geez
JASON JACKSON lmao well i guess you don’t know that they come in either one whole piece or 3 pieces
xjacobx 20 lol nope. I learned that today and was kinda disappointed, especially knowing how cheap and easy they are to make on a CNC machine Or hell even a 3D printer.
xjacobx 20 really man. They just seem so freaking flimsy and cheap. And that’s kinda not surprising in this day
Will this fit on a RT?
If the RT has the 1 piece spoiler.
** 3/8th inch bit