@RussellsFishingTech talks wire diver 101 the ins and outs of what a wire diver setup is and how to run it. What reels, rods and divers wok best. www.salmoncandyfishing.com
My low budget hack foes an entry level wire diver rod is an Okuma Classic Pro Copper rod with a twilli tip on the end. Probably wouldn’t be good for daily use but for a few trips a year it’s been great for me for 2 seasons and only $55 in each rod.
Excellent video Russel thanks! Is there a shelf life on wire? How many years is it good for if you do periodically just cut and re tie the corkscrew (weaker) end? Does the good stuff on the reel deteriorate or weaken over time?
Great videos, thank u for all the tips. Quick question with a Twilli tip set up do you still use a bead at the end like you would for a swivel tip rod?
When you happen to “ corkscrew “ the wire, and you should cut it, is there a knot, or what knot do you tie the two sections of wire together with? Is that section beyond the affected area junk, or can a knot be tied to join the two sections? ( redundant for clarity). Another Great video Russell! Thanks!!
Thanks for the video, great advice. Curious how much mono backer goes on the wire reels? Does it vary at all or just a standard length and the balance with wire to fill the spool?
Long rods are nicer if you run longer leads from ur diver to flasher to keep from having to handline to net. If I’m only running two divers the rods will be 10’6”. Only run the shorter when running double divers per side
Mr Russel, would you point me in the right direction, I’m looking for a track board system, using Cannon down riggers, I’m looking for a 8’ track, I’m just getting back into this, and like all your videos, if you have a store, would love to do business with you, going get rods and reels you recommend, list to you a lot, little here little there. Thanks for all your videos and help, Jeff Howard
I run my high diver on a 4 it’s not about how much you space them they only have a potential to get tangled when u get a fish on the high and it runs into the inside board line but that you can’t control
Pardon my ignorance is a wire diver simply a rod and line counter reel with wire spooled or is there some sort of dipsy type diver for wire? Can I use wire with planar boards?
My question is.......is there a chart for depth when using wire? I cannot figure out how far to let it back on a magnum diver to get the desired depth. There's no chart I've found and I'm new to this
I would guess the size of your boat could be in play and how close the inside divers are to your riggers. You want as much spread between lines as you can get but on a smaller boat like my 15' I find I need my inside divers on a setting 2 to get them out away from my riggers far enough. My high divers will be set to a 3 or 3.5. Another trick to spreading lines, especially if you are using all 4 of the same diver size, would be to use the ring on the inside diver to get a more aggressive dive and spread, and don't use the ring on the high diver so it runs out a lot further back but never gets as deep. They are near impossible to tangle that way.
I liked wire divers...used the thru-the-loop knot thats recommended . I was careful with it in the boat and careful not to reel it up tight. I was using mag divers with big flasher n fly setups. After the second time of getting withing 4-8 feet of the boat and the wire snap off for no reason and me getting to watch $50 in gear swim to the bottom I decided to stick with braid. I feel like I just got kicked in the balls. Not just the $$ but the time n effort it takes to find and obtain said gear. I don't like being that totally pissed off when I'm really trying to enjoy the limited time I get to fish. I really don't like that feeling after all the preparation. Braid low divers for me.
don’t tell ur gf to tighten the drag when letting out line when u get to depth and she looks at ur weird and flips the bail open and blows up ur reel 🤷♂️ little wire diver tip
I was hoping you would do a video on wire divers! Great info - thank you!
Great content my friend. Thanks.
My low budget hack foes an entry level wire diver rod is an Okuma Classic Pro Copper rod with a twilli tip on the end. Probably wouldn’t be good for daily use but for a few trips a year it’s been great for me for 2 seasons and only $55 in each rod.
Thanks Russel!
agree 100% great vid
Excellent video Russel thanks! Is there a shelf life on wire? How many years is it good for if you do periodically just cut and re tie the corkscrew (weaker) end? Does the good stuff on the reel deteriorate or weaken over time?
No it will last years
Great videos, thank u for all the tips. Quick question with a Twilli tip set up do you still use a bead at the end like you would for a swivel tip rod?
yes
When you happen to “ corkscrew “ the wire, and you should cut it, is there a knot, or what knot do you tie the two sections of wire together with? Is that section beyond the affected area junk, or can a knot be tied to join the two sections? ( redundant for clarity).
Another Great video Russell! Thanks!!
If the wire corkscrew cut that section off. Generally it’s right by the swivel those first few feet. I wouldn’t suggest ever splicing the wire
Good video, thanks for sharing. Do you run snubbers with your wire divers? If so, what size/length/brand is best?
Yes warrior snubber ok
im on lake ontario im confused about dipsy settings 1 2 or 3? how much line do i let out what depth will i get running brad or lead core
Thanks for the video, great advice. Curious how much mono backer goes on the wire reels? Does it vary at all or just a standard length and the balance with wire to fill the spool?
Depending on size usually around 100 yards of mono
@@RussellsFishingTech Thank you!
Question for you captain Russel…. I just got two diawa greatlakes wire rods with the roller guides.. how does a guy string that thru those guides??
Long rods are nicer if you run longer leads from ur diver to flasher to keep from having to handline to net. If I’m only running two divers the rods will be 10’6”. Only run the shorter when running double divers per side
Mr Russel, would you point me in the right direction, I’m looking for a track board system, using Cannon down riggers, I’m looking for a 8’ track, I’m just getting back into this, and like all your videos, if you have a store, would love to do business with you, going get rods and reels you recommend, list to you a lot, little here little there. Thanks for all your videos and help, Jeff Howard
Yep call me anytime 9203952079 we will get u the right stuff to fill the cooler
Do you still sell the full roller rods, by Okuma?
How far do you space your high diver to inside board? If on a 3 or 4 setting next to 300 copper.
I run my high diver on a 4 it’s not about how much you space them they only have a potential to get tangled when u get a fish on the high and it runs into the inside board line but that you can’t control
Pardon my ignorance is a wire diver simply a rod and line counter reel with wire spooled or is there some sort of dipsy type diver for wire? Can I use wire with planar boards?
It's only for dipsey divers. It cuts the water nice therefore reaching greater depths with less line out
Are you going to show how to do a slide diver on wire? I did think you could on wire
Yes
Awesome thank you Loving the video series you’re doing
Laker on wire puts close fight as king on planner board
Agreed
You hear of guys putting 15 to 20' of 50# fluoro on the end so you dont get the curly q end?
My question is.......is there a chart for depth when using wire? I cannot figure out how far to let it back on a magnum diver to get the desired depth. There's no chart I've found and I'm new to this
At a 1.5 setting on the diver it’s about 2:1 ratio so 100ft back is 50 down
@@RussellsFishingTech thank you so much
Do you have a link for those plastic beads?
Any 10-12mm bead will work
What settings do you have on your divers when running two wires on each side
I would guess the size of your boat could be in play and how close the inside divers are to your riggers. You want as much spread between lines as you can get but on a smaller boat like my 15' I find I need my inside divers on a setting 2 to get them out away from my riggers far enough. My high divers will be set to a 3 or 3.5.
Another trick to spreading lines, especially if you are using all 4 of the same diver size, would be to use the ring on the inside diver to get a more aggressive dive and spread, and don't use the ring on the high diver so it runs out a lot further back but never gets as deep. They are near impossible to tangle that way.
1.5 inside setting and 4 outside setting
@@andrewkenny742 are you running two wire divers on each side with those settings?
@@heehaw2401 my high diver is braid. Just listen to Russell lol
@@andrewkenny742
I do appreciate your information . I don't have a really big boat either
I liked wire divers...used the thru-the-loop knot thats recommended . I was careful with it in the boat and careful not to reel it up tight. I was using mag divers with big flasher n fly setups. After the second time of getting withing 4-8 feet of the boat and the wire snap off for no reason and me getting to watch $50 in gear swim to the bottom I decided to stick with braid. I feel like I just got kicked in the balls. Not just the $$ but the time n effort it takes to find and obtain said gear. I don't like being that totally pissed off when I'm really trying to enjoy the limited time I get to fish. I really don't like that feeling after all the preparation. Braid low divers for me.
Wire is very temperamental but it catches fish like crazy
Slide divers work with wire ?
Yes you have to set it up a little different and we will do a video on that at some point
don’t tell ur gf to tighten the drag when letting out line when u get to depth and she looks at ur weird and flips the bail open and blows up ur reel 🤷♂️ little wire diver tip