That window tint was easy it’s the ones that are years old and have baked in the sun that are annoying to remove because they break into pieces. Especially if it’s on the rear window where you can damage the heating element
I recently removed tint off a 2007 civic, both rear doors with the back glass.. it was like dandruff and sometimes i got lucky and had a stripe going! Only for it to cut off at every heating line lol
I would advise using plastic blades at least or some #0000 steel wool, car windows are usually tempered and have a curve to them so when putting a flat blade onto a curved surface you’re most likely gonna leave tiny hair like scratches throughout the window. New blade absolutely, just be careful because those metal blades WILL NOT BE. Lol.
Mist it tape black plastic over the inside put it in the sun and it will come right off. Best way to remove the rear window tint. The method in the video is the preferred method for side windows but like he said not for the rear. You will damage the defrost and radio antenna. A lot of cars have the radio antenna in the rear window with the heating elements.
Windex is the best thing to use to take off window tint just pray a lot of Windex over the inside of the window where the tent is I've been doing it's like 40 of my cards already let it sit for like a second then put the razor towards the top of it if it was on there for a long time let the razor get under the tent let it be a little bit and just start spraying the Windex as you peel it in a come right on back front all around
What about the back window ? Windex with a trash bag over it and some sunlight ? Some people use orange cleaner or something like that and some heat sun or heat gun
You can do the rear window like this, but you have to tilt the razor blade back and drag it across the window so it doesn't cut the electrical grid. Takes just a little more time.
Yah all nice and easy if it has been on there less than a couple years … sun baked window tint that is cheap sucks it just falls apart had to charge $150 to remove took 3 hours with a heat gun and steamer. Worst tint ever to remove
Most windows are curved one way, others both ways, so a razor blade will etch into the window if the curve is 90deg to your swipe. Don't ask me how I know 😢
@@kelraf9227 yeah I see it can be pricey, especially for the back windshield but that section is understandable because there’s a chance the defroster can be damaged. There is a level of care and skill to it.
That window tint was easy it’s the ones that are years old and have baked in the sun that are annoying to remove because they break into pieces. Especially if it’s on the rear window where you can damage the heating element
Spray soke Ammonia on it and let it sit a min, then start peel and spray as you peel an itll come off easily
@@gofastgang7284I tried that so many times and it won’t budge.
This is exactly my problem now I got the dark tint off and now I have this clear blurry film left on my back window and need to get it off. Any ideas?
I recently removed tint off a 2007 civic, both rear doors with the back glass.. it was like dandruff and sometimes i got lucky and had a stripe going! Only for it to cut off at every heating line lol
@@TheEFmyster same
Bro... Your voice belongs in music
I knew I could rely on the comment section to mention his voice haha
Definitely wasn’t expecting that voice when I first saw his face
No homo 😳
I would advise using plastic blades at least or some #0000 steel wool, car windows are usually tempered and have a curve to them so when putting a flat blade onto a curved surface you’re most likely gonna leave tiny hair like scratches throughout the window. New blade absolutely, just be careful because those metal blades WILL NOT BE. Lol.
Great tip on blade safety, well done! 😊
Will you show how to remove tint from back window?
Steamer
@@cameron5717😂😂
I work in detail. STEAMER and a razor blade just don’t Cut Into your Lines on the back window or your gunna need a Whole new back window.
Sledgehammer
@@elsey1976there’s always one person lol 😂 🤦🏻♂️
Mist it tape black plastic over the inside put it in the sun and it will come right off. Best way to remove the rear window tint. The method in the video is the preferred method for side windows but like he said not for the rear. You will damage the defrost and radio antenna. A lot of cars have the radio antenna in the rear window with the heating elements.
I'm enjoying watching your video. I run a tint shop in South Korea. The video is very informative as the same tinder.
Man if only it was that easy removing tint on older cars , I was scraping for awhile when none of it would peel
Whisper in my ears bro. Damn that voice is majestic af.
No diddy
Windex is the best thing to use to take off window tint just pray a lot of Windex over the inside of the window where the tent is I've been doing it's like 40 of my cards already let it sit for like a second then put the razor towards the top of it if it was on there for a long time let the razor get under the tent let it be a little bit and just start spraying the Windex as you peel it in a come right on back front all around
What about the back window ? Windex with a trash bag over it and some sunlight ? Some people use orange cleaner or something like that and some heat sun or heat gun
Thank you dude! Used right mic, right voice. PERIOD…..!
If glue is giving you a hard time use brake cleaner, that thing works magic I use it on multiple occasions and works.
Shut the hell up
Always make sure a place your face as close to the blade as you're scrapping the glass to be sure you don't scratch the glass.
There’s razors that won’t scratch the glass
You have an AMAZING voice! Can you sing on the next video? 😏
Definitely a voice for radio etc...
Young man is well spoken. Not the usual hood shit.
Thank u for saving me money I truly appreciate it.
He’s so pretty with a handsome voice
'you'll bury that in your arm'.... Sadly, I've done that but with a cardboard box. Lol
If you inspect the glass with a bright led there will likely be scratches from the blade, and yes, even a new blade. I would try plastic razor blades.
scraping sideways doesn't allow the razor to lay flat in the curve of the window
When removing glue I make a pass across the bottom then scrap up not down .
You can do the rear window like this, but you have to tilt the razor blade back and drag it across the window so it doesn't cut the electrical grid. Takes just a little more time.
Thanks bro, this helped out so much 🙏🏼
Yah all nice and easy if it has been on there less than a couple years … sun baked window tint that is cheap sucks it just falls apart had to charge $150 to remove took 3 hours with a heat gun and steamer. Worst tint ever to remove
This guy looks like Elvis Presley a little bit. Like he could be his grandson. I can't be the first to mention that.
Pulls window too hard*
Breaks window*
Use stainless steel blades, not carbon steel. I'm surprised he didnt mention this.
Great video, concise and to the point! No bullshit!
U can also use goo off spray and it'll take all the sticky off as well
Your voice is awesome bro, you could be next Kane Brown
deep voice dude!
Face: baby
Voice: that black dude who was a werewolf in the movie the underworld
It NEVER comes off like that man.
My kid when he thinks the plastic wasnt removed when i got the car:
Nicely done.
That looks like a pretty fresh tint job what about when it is old and has be baking for years.
If there is ton of dried up glue just get some bug/mosquito spray and rag then clean with windex after
I want to see how you remove tint off a car back glass that breaks in pieces. Tint that a steamer dont help. What do you do.
Most windows are curved one way, others both ways, so a razor blade will etch into the window if the curve is 90deg to your swipe. Don't ask me how I know 😢
I did it on the back window now what do I do 😭
No more rear defrost
ATR adhesive remover, that’s all that needs to b said
The spray part had me confused. How's that work again? Seems complicated.
Hey buddy I don't know what you should or shouldn't do but I just saw an ad from temu using your video for their product
He looks and sounds like the late legendary Peter Steele Type o negative frontman ok back to window tinting
Also don’t flip the razor blade over after scraping on one side. You’ll be pissed
Could you do a video on removing windshield film?
No
Thanks seth Everman
Good looks 👌🏼
Tint on the door at the end, bro fumbled on the goal line
Thanks for telling everyone to use a fresh blade and not to use an old one. But you forgot to tell them that the old blades will scratch the glass.
Thanks for showing us
Thanks!!!
“Fresh” window tint
You can use all purpose cleaner. To
Bruh..you are in the wrong trade...
Music studio is waiting for you 🎶
This truck is also a 2023 , it won’t work like that on anything older than
Lmao how to take of fresh tint you just put on or by look of the car could only be a year old, but thank you.
Where’d you get the razor blade holder from?
What do you do for back window without steamer ? Aside from putting it under the sun.
How I stop those peanut shape bubbles from appearing after I finish the rear window
Bro what kind of shaver is that looks nice
What do you use to scrub the window? I see in your videos you have a little white scrub pad. What is it and where can I find it?
Dude, is your arm ok?!?
I NEED TO KNOW WHAT WILL HAPPEN ON THE BACK
Trash bag method with heat from sun
damage the defrosters
Thanks :)
Do you have to use windex or the baby shampoo mix works also ?
Bhai ka challan kat gaya🤣
Nice! Where can i get that hat though? Send me a link.😅
Yesterday's tint comes off easy... try 1997 tint...
What about the back window
Why does my tiny crack and chip when I try to peel it 😢
now do this on a car with tint thats a few years old.
What about 20 year old tint that is flaking
Booyah 👊🏽 😁 👍🏽 🇺🇸
Wait so what will happen to the back window with this method?
Did you accidentally cut yourself ? Is that how you know about that little tip?
How about the old ones with the bubbles
His voice is off. I am curious if this is his actual voice or a voice over
So what do you do if you have bubbles rear windshield and the 2 layers of film separate from each other
80$ just for removal is crazy
Aw man... i need to know how to take it off the back window...
Question can I use plastic razor blades for the windows to remove all the glue on glass it’s my first time bout to tinted my windows
A crowbar works too.
Seems like it was a redo job… that tint came off like it was on there a week or two (not hatin) 😅
Yeah if the tint isn’t 20 + years old 👍🏼
😮 fabuloso
If it's old tint that wont happen
What’s your method for doing the back window?
Sponge pad
I literally was like yeah let me get rid of my pesky window tint and immediately went ▶️😮⏸️🤯
I won’t need a heat gun to remove?
Am I supposed to remove the factory tint layer example my Chevy has a clear layer in the bottom corner it says GM shatter do I remove that or no?
This video didn't show me how to remove Windows 10 😢
In my place my uncle got fined 6000 for a tint
Windex works
Every car you do is frameless
Window tint on thee nor
How much do shops typically charge to remove tint?
I asked my local shop and they said 200. I'm definitely doing it myself 😅
@@kelraf9227 yeah I see it can be pricey, especially for the back windshield but that section is understandable because there’s a chance the defroster can be damaged. There is a level of care and skill to it.
@@MichaelBrianInc i just did my front two windows... not too bad. Definitely scared to do the back. Gonna do a lot more research 😅
Thanks captain obvious.
Not all windows you can use blade specially on Lexus New models SUV if you use blade you are done man 😂
Use a heat gun. Took me 5 minutes and no glue left.