Thanks MrDavcan. I searched around on how to pull it apart and couldn't find much so figured it out myself and decided to video. Hopefully it helps a few folks out.
I made it on my VX. It is very similar as the FX exepted the fact that the shaft drive doesn't come with the nozzle and the propeller. The installation is a little bit different but very common as your FX.
That hose and valve is for the sprayer that shoots out of the rear deck. It's so I can turn the sprayer on and off. Used another piece of hose so I could keep the original in one piece.
Do you have to put rubber plate back on or can you leave it off ?? I ride in salt water and it just is in the way for washing the ski down after a ride
hey all, hoping someone can help, everything went well till i try to put shaft back into the hole at the back, it goes in so far but then no further and is like a spring pushing back out, almost like air is trapped and forcing the shaft back out when i try to push it in. we did put grease in the grease nipple at back of engine and think maybe it took too much and maybe that is what the problem is, what do you think? please help. yamaha gp1200x 1999 2 stroke
I assume that black plastic fender behind pump is a brake right? My friend bought a waverunner and when he was using it last year, he had trouble docking. That thing just kept running ahead on idle. The one I rented held still on idle. So is there maybe some line adjustment on it?
That black fender use for break old model don,t have break or neutral you gonna play with reverse and fwd while docking unlike the newest model they have neutral.
Hello my dear friend, how are you? I have a Jet Ski Yamaha 1300 slow speed when launched by a weak speed to launch strongly after a few seconds increase its speed something little please help me solve this problem
Awesome guide! Was able to get my wear ring assembly swapped out in 45 minutes round trip. Really appreciate it!!
No worries. Glad it helped
Thanks mate;) I have the service manual, but seeing it done makes it so much less scary! Good Job
Thanks MrDavcan. I searched around on how to pull it apart and couldn't find much so figured it out myself and decided to video. Hopefully it helps a few folks out.
No worries Phil West. Glad it was useful to you.
I made it on my VX. It is very similar as the FX exepted the fact that the shaft drive doesn't come with the nozzle and the propeller. The installation is a little bit different but very common as your FX.
That hose and valve is for the sprayer that shoots out of the rear deck. It's so I can turn the sprayer on and off. Used another piece of hose so I could keep the original in one piece.
Haha thanks junkyardhemi. Unfortunately the sun has wrecked it a bit. Needs some touching up now.
Thank you
nice camera shots and useful explanations! why i there a piece of garden hose with a plastic valve though ?
Cheers Grant.. top video.. Really helpful. :)
Thanks for the video
thank you!
Do you have to put rubber plate back on or can you leave it off ?? I ride in salt water and it just is in the way for washing the ski down after a ride
A lot of people i know removed theirs without a problem. It’s really does just get in the way.
good job !!
How long do jet pumps last?
Did u use any sealant?
Kick ass TOOL tat!
hey all, hoping someone can help, everything went well till i try to put shaft back into the hole at the back, it goes in so far but then no further and is like a spring pushing back out, almost like air is trapped and forcing the shaft back out when i try to push it in. we did put grease in the grease nipple at back of engine and think maybe it took too much and maybe that is what the problem is, what do you think? please help. yamaha gp1200x 1999 2 stroke
Nickel chrome .Merci
I assume that black plastic fender behind pump is a brake right? My friend bought a waverunner and when he was using it last year, he had trouble docking. That thing just kept running ahead on idle. The one I rented held still on idle. So is there maybe some line adjustment on it?
That black fender use for break old model don,t have break or neutral you gonna play with reverse and fwd while docking unlike the newest model they have neutral.
Can’t go on after 6:30 it is so hard and full of seasalt, do you got recommendations to get it off?
Hi Grant great DYI could you please tell me if you use gasket goo when you put pump back together. ????thanks Gary
Hi Gary, no I didn't use gasket goo when reassembling the pump. Have heard since that you're supposed to though.
OK THANKS, again it was a great DIY Cheers Gary in Australia
Hello my dear friend, how are you? I have a Jet Ski Yamaha 1300 slow speed when launched by a weak speed to launch strongly after a few seconds increase its speed something little please help me solve this problem
What was torque on the 4 bolts?
Ehh from memory it was around 80nm by the specs. Could be wrong there. It was a while ago. I didn’t torque them though. Just did them right.
Hope you don't mind, I linked to your video from jetboaters.net/index.php?threads/yamaha-jet-pump-disassembly-from-grant-browne-youtube.446/