One suggestion please: Step back. When you show the finished product on a level with new shoes, step back so we can see the side view from about 20-30 feet back. Up close does no justice to see how the entire truck sits. The most important part of the video is the finished product and you don't show it but from a close distance and an angle. Everyone looking to sow how it looks "level" can't see it. But, thank you for the in depth way you showed how to remove all the subparts to assemble in case we are doing it at home. Cheers.
I love the look of that tire and wheel set up. These strut spacers are so much nicer than the preloaded kits because your stock shocks don’t require extra spacers to avoid over stretching.
Steve, I have been beating myself up on getting new rims and tires for my 2019 Ram this is the type of video I needed to decide! Great video! Thanks!! Stay safe bro, from the Burgh!!
I put the Bilstein 5100 2.5” leveling struts on my 2012 1500 and I am very pleased with them. Had spacers on before but took them out and swapped for the Bilstein. Much better ride and the perfect amount of lift in the front. Not sure if they’re out for the 2019 yet, but definitely check them out for the rebel.
I got the the same Moto Fab level in the 2.5 inch . They don’t have coilovers out yet that I’ve seen. The ride isn’t bad with the leveling kit. I wish I had a good shop around me to work on my truck.
Luis Ulloa It’s not a rough ride with the level kit. I noticed more of a change in ride when I put a Duratrac tires on. It could also be all the potholes here on the Illinois roads.
Luis Ulloa , if you only put on the leveling spacer kit, only change you will have is due to a center of gravity change. There is no change to the spring rate or amount of travel. Start adding wheels and tires as well and you cannot tell what change made the ride different
Great video. I just bought my first RAM last month. It is a 2019 bighorn with the blackout package and led lights. I seriously love this truck. I am considering a lift with tires and wheels in the future. I just subscribed and can't wait for more of these type of videos. Thank you!
i know this is an old video but it was my inspiration for my rig last week...nittos, ballistic rage 20x10 -19mm...motofab 2.5, RC running boards.... thanks brother
Mopar Rock: Did you do your wheels and tires? I was thinking of doing the same exact wheels 305/55R 20s and a 2" Mopar leveling kit for my 2020 Warlock. Just wondering how you made out? If you have factory flares or not and what's the "poke" of the tires from the fender? Thanks!
@@jeffshultz3883 unfortunately I cannot post a picture here. Also the “poke” is slight maybe a couple inches but it turned out perfect. Looks awesome. Just added the bakflip tonneau cover and bedrug.
@@mopar5447 That's fine! I don't need a picture.l was just looking for some help as I have never done this to a truck. I have always wanted a truck like yours but something was always more important. Mortgage, College, Orthodontist and the list was endless. My last daughter gets married in two weeks!!! Now it's time for something I want for a change. I appreciate your time to reply and your help is valuable. Thanks! You're truck is very very nice!
These guys are good. That leveling spacer setup wears out fast unless u change the upper control arm. The geometry is off. Bad angle on the ball joint. I don’t care for that method. But customer wants it right.
Thanks for taking us along. Often think about leveling my 17 Ram, just worried about throwing out the geometry and premature wear. I don't know a hell of lot about this stuff lol. Anyway, Good luck in a year and half, hear's to 100k subs by then ;)
What’s wrong with doing top hat spacers Obviously the only concern is the UCA at this point but if u install say a RC UCA rated to a 6”lift and Motofab 2” or 3” top hat spacers would that be proper or still something wrong with that
It's so hard to figure out what offset to go with. I've seen from -12 to -24 I just want the tires to line up with my factory fender flares or just slightly past. 2014 Laramie
I'm assuming it's not a issue that you have to rotate the strut 180 degrees for the new spacer bolts to line up??? So the strut is going back on in the opposite direction???
I am doing al most the same setup with Fuel Vapor rims 20x10R20 -18. Can I ask - Can you put 33x11.5 on this rim or would it have to be 33x12.5? I think thinner is better for the snow and turning.
@@BEASTProjects probably ..its really hard to find good shops around to work on your truck... but i just traded my 2014 for a 2019 bighorn loving it so far!
Great video…very informative! So you say this is not the route you’re going with your Rebel, can you share how you’ll lift the Rebel? Just curious, that’s all. I just saw a video of a Mopar 2” lift kit, any experience with this kit? Thank you.
Just purchased a 2019 Ram 1500 2wd new body style and I plan to put on a 2.5 front leveling kit with 35x12.5 tires on 18x9 wheels! Does anyone have any knowledge as to if this would cause any rubbing? If so what can be done to combat that issue? Also, will I absolutely need to purchase to control arms? And why? (First time truck buyer & first time dealing with large wheels/tires and any type of leveling kit)
These guys are awesome! I could use a garage like this up Northern Pa. It's about 2+ hour drive from home but it might be worth it! Did ya retire yet? Or two many toys to buy yet?
Glad I found this video. Realized you and JP are in my neck of the woods, and I am looking for a good shop for some mods. for my '19 Ram 1500. Have you heard anything about leveling w/ Air Suspension?
well there went the warranty out the window a dealer will not even consider touching it with that type of lift kit they wouldn't even work on mine because I had 10 inch wide rims on it
Thats shitty...my dealer where i bought my 19 has always been good about anything warranty related. And i have these exact spacers and no muffler on my truck. It really depends on the dealer. If they wanna be dicks they can be
Hi, I stumbled across this video last night. Great video 👍 My local shop will be installing the 2” ReadyLift billet spacers on the front end of my 2018 Ram 1500 next month. Question for you (sorry new to modifying) Should I also get the shop to install the ReadyLift UCA’s or will the spacers be good enough? Thank you...
Steve, the consensus on using these on a 4th gen is that they ruin the ride, and its "The Cheap" way to level it over using a set of say Bilstein 5100 adjustable struts. Could you ask the fellas there why these spacer kits work on the 5th gen, and not so well on the 4th gen? Yours isn't the first channel I've seen on doing the space on a 5th gen.
Travis, it’s the customer’s preference. It won’t be the direction that I will be going with the Rebel. I’ve had the Bilsteins on my 2012 1500 & liked them.
@beast hey man been watching your channel and loving it so far Was wondering if you could take a moment and answer a question that's driving me crazy! Please help lol thanks I have a 2019 5th (new body) gen ram big horn and I'm looking to order a 2.5 level kit with 22x12 wheels my question is am I stuck with 33s or can I put on 35s? I dont mind rub at full lock and wont be off roading at all. Do you think I can clear 35s with just the level kit? Thanks for your help thanks for all the content also
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs PSG )](http://i.ytimg.com/vi/zM25REvnJW4/mqdefault.jpg)
The JP Shop always has some good music playing
Agreed! Thanks for watching
One suggestion please: Step back. When you show the finished product on a level with new shoes, step back so we can see the side view from about 20-30 feet back. Up close does no justice to see how the entire truck sits. The most important part of the video is the finished product and you don't show it but from a close distance and an angle. Everyone looking to sow how it looks "level" can't see it. But, thank you for the in depth way you showed how to remove all the subparts to assemble in case we are doing it at home. Cheers.
My concern would be the undo stress on the ball joints. Changing the control arms would be my choice.
I love the look of that tire and wheel set up. These strut spacers are so much nicer than the preloaded kits because your stock shocks don’t require extra spacers to avoid over stretching.
I really like these new rams!
Sweet! I put a 3.5 inch lift level kit on mine with Moto Metal M0984 Shift black 20" rims, and 35" BF Goodrich KO2's
Have you had any issue so far with 3.5 inches lift Level kit?
Nice video steve 👍
This setup on the 1500 looks very cool 😎 👍
Steve, I have been beating myself up on getting new rims and tires for my 2019 Ram this is the type of video I needed to decide! Great video! Thanks!! Stay safe bro, from the Burgh!!
Awesome man, glad I can help!!
4x2 truck with mud tires. I am speechless 😂😂😂
No one cares
I like this a lot!!! Simple straight foward!!! Nothing crazy but made it their own!!!!
Great video!!! The wheels and tires and stance looks awesome!!!
I put the Bilstein 5100 2.5” leveling struts on my 2012 1500 and I am very pleased with them. Had spacers on before but took them out and swapped for the Bilstein. Much better ride and the perfect amount of lift in the front. Not sure if they’re out for the 2019 yet, but definitely check them out for the rebel.
Had them in my 2012 Ram 1500 too. Loved them!
I got the the same Moto Fab level in the 2.5 inch . They don’t have coilovers out yet that I’ve seen. The ride isn’t bad with the leveling kit. I wish I had a good shop around me to work on my truck.
TA Goodfellas what difference you feel?
Luis Ulloa It’s not a rough ride with the level kit. I noticed more of a change in ride when I put a Duratrac tires on. It could also be all the potholes here on the Illinois roads.
Luis Ulloa , if you only put on the leveling spacer kit, only change you will have is due to a center of gravity change. There is no change to the spring rate or amount of travel. Start adding wheels and tires as well and you cannot tell what change made the ride different
Great video. I just bought my first RAM last month. It is a 2019 bighorn with the blackout package and led lights. I seriously love this truck. I am considering a lift with tires and wheels in the future. I just subscribed and can't wait for more of these type of videos. Thank you!
Welcome to the family!!
I have the exact same truck. Went with the rough country 2' kit and 33x12.50. I love it!
@@jonathanfoster6586 Sounds great! Ram did a great job on these new trucks.
Great all around video, the genuine enthusiasm is outstanding. Informative, and entrainment.
Thank you 🙏🏻
Never leave the pistol behind.
New to the channel love it so far cant wait till you do the video on the console safe 👍
Next video, promise..
damn fits perfect...this is what I was wondering off duty carry federal here...perfecto!
i know this is an old video but it was my inspiration for my rig last week...nittos, ballistic rage 20x10 -19mm...motofab 2.5, RC running boards....
thanks brother
Thanks for watching!
Mopar Rock: Did you do your wheels and tires? I was thinking of doing the same exact wheels 305/55R 20s and a 2" Mopar leveling kit for my 2020 Warlock. Just wondering how you made out? If you have factory flares or not and what's the "poke" of the tires from the fender? Thanks!
@@jeffshultz3883 jeff yes I did the wheels tires and motofab 2” leveling kit. I love the look. Trying to paste a picture for you if I can.
@@jeffshultz3883 unfortunately I cannot post a picture here. Also the “poke” is slight maybe a couple inches but it turned out perfect. Looks awesome. Just added the bakflip tonneau cover and bedrug.
@@mopar5447 That's fine! I don't need a picture.l was just looking for some help as I have never done this to a truck. I have always wanted a truck like yours but something was always more important. Mortgage, College, Orthodontist and the list was endless. My last daughter gets married in two weeks!!! Now it's time for something I want for a change. I appreciate your time to reply and your help is valuable. Thanks!
You're truck is very very nice!
Whoo hoo more mods always means more knowledge 👍🏻
Oh my God I’ve had to do the Heimlich maneuver twice on infants. It is the scariest situation in any persons life.
Great video! That setup looks pretty sweet.
Thanks Ben
Great looking combo! 👍🏻
These guys are good. That leveling spacer setup wears out fast unless u change the upper control arm. The geometry is off. Bad angle on the ball joint. I don’t care for that method. But customer wants it right.
Thanks for taking us along. Often think about leveling my 17 Ram, just worried about throwing out the geometry and premature wear. I don't know a hell of lot about this stuff lol. Anyway, Good luck in a year and half, hear's to 100k subs by then ;)
Thanks Den
Im worried about the same thing
he'll be back for fender flares in no time
Love the 21 pilot music at the shop sir..👌
Great video bro 👍🏾.
What’s wrong with doing top hat spacers
Obviously the only concern is the UCA at this point but if u install say a RC UCA rated to a 6”lift and Motofab 2” or 3” top hat spacers would that be proper or still something wrong with that
Sharp! Got my parts in for the filter delete already from Dirty Diesel's. Everything looks great! Just gotta get some time for the install..
Sweet!
I wish you would actually show the whole truck.
Perfect set up.
Nice look what about for the limited but I'm concerned about the air suspension
It's so hard to figure out what offset to go with. I've seen from -12 to -24 I just want the tires to line up with my factory fender flares or just slightly past. 2014 Laramie
Do I see a ram beasts garage in the future 🔮🙈
Wait... is that a Brian Regan reference at 1:30? LOL. Also, great vids, subscribing!
Welcome to the channel!
I definitely wouldn't of cheaped out and did the Readylift or similar with the UCA.
Yeah those 10 wides look great, I may go 12 though.. My wheel choice would definitely be Hostile Zombies..
Looks great
Damn that is really nice 👍🏿 bro 💯
This is what I wanna do to my ram. W after this is it required to do a alignment??
Nice set 👍🔥
I did same thing but I did Zero off set
And it was flush with fender but mine is LARAMIE so I have fender flares
Why do you need a leveling kit? Whats the purpose? What’s wrong with stock air susp?
Love the channel
Thanks Bobby!!
Looks just like my ram. Except I got the 2.5” kit.
I'm assuming it's not a issue that you have to rotate the strut 180 degrees for the new spacer bolts to line up??? So the strut is going back on in the opposite direction???
Cheers!
Got my first amsoil oil box from beastsynthetics, changing it this weekend!
Thanks Alex!!! Love it!
do you recommend an upper a arm replacement with that kit or does it not need it.
Not a bad idea...
@@BEASTProjects thanks great job with the channel
🙏🏻
I can't wait to throw a set of 33s on my 2014 ram
i would like to the part where he cut out the inside of the fenders. i have same exact whiles and tires and size and i cannot barely turn.
Doesn’t the strut have to go back in the same orientation in , I noticed the shock was turned around 180 degress
Without the leveling kit, for example a model with air suspension, would this set up rub?
I am doing al most the same setup with Fuel Vapor rims 20x10R20 -18. Can I ask - Can you put 33x11.5 on this rim or would it have to be 33x12.5? I think thinner is better for the snow and turning.
Looks goods
Looking (images, videos) at Dodge trucks with the lockable bed storage, it looks to me that a canopy can't be installed?
Will it rub if you put 20x10s with a -22 offset instead of -18 with the same tires and leveling kit
I installed this leveling kit on my 2014 ram in less than a year i had to replace a shock an a control arm.!
The installers probably didn’t loosen the control arm bolts & damaged the bushings.
@@BEASTProjects probably ..its really hard to find good shops around to work on your truck... but i just traded my 2014 for a 2019 bighorn loving it so far!
Put Kings on!
Did your transmission act up when you put on bigger tire?.
Did this set up rub at all or need any Trimming
Great video…very informative! So you say this is not the route you’re going with your Rebel, can you share how you’ll lift the Rebel? Just curious, that’s all. I just saw a video of a Mopar 2” lift kit, any experience with this kit? Thank you.
There’s video on it, check out the playlist. Thank you 🙏
@@BEASTProjects ok I’ll check it out. Thanks for the lightning response!
Do you loosen the upper control arm after the strut is removed?
What size tires are they? Not 33 I mean are they 285? 305? By 55? 60? What? Thank you!
Just purchased a 2019 Ram 1500 2wd new body style and I plan to put on a 2.5 front leveling kit with 35x12.5 tires on 18x9 wheels! Does anyone have any knowledge as to if this would cause any rubbing? If so what can be done to combat that issue? Also, will I absolutely need to purchase to control arms? And why? (First time truck buyer & first time dealing with large wheels/tires and any type of leveling kit)
These guys are awesome! I could use a garage like this up Northern Pa. It's about 2+ hour drive from home but it might be worth it! Did ya retire yet? Or two many toys to buy yet?
Thanks Jeff, I can retire now, but I’m in search of a new job to start my 2nd career in the private sector. Wish me luck!
Do you need to run a lift kit in order to fit those size tires and wheels,on a 5th gen ram ?
Good video
Thanks Scott!!
I have a 2019 ram Laramie and live in PA. Looking to do rims and tires next. Would love the help as to what to do next if interested. Blacked out ram.
How big do you want to go?
what is the reason that you changed only the front Why didn’t you change the rear or is it not necessary to do this?
People like the leveled appearance
I am about to Level my 2022 1500 with a Motofab kit. Do you guys recommend 2 or 2.5 for TRUE level?
What should I expect to pay a shop to put on a leveling kit like this?
What is the size of the rim and tires and what brand is the tires?
I had a simple concept of a Jeep Scrambler with the standard non-scrambler interior hard and soft tops (but modified) with a custom made trunk. ;-)
What is the name of the song in the intro of the video
Glad I found this video. Realized you and JP are in my neck of the woods, and I am looking for a good shop for some mods. for my '19 Ram 1500. Have you heard anything about leveling w/ Air Suspension?
They’re doing one this week. I’m going to do my best to get in to check it out.
Was there a lot of trimming needed? Im going with the same package
well there went the warranty out the window a dealer will not even consider touching it with that type of lift kit they wouldn't even work on mine because I had 10 inch wide rims on it
Thats shitty...my dealer where i bought my 19 has always been good about anything warranty related. And i have these exact spacers and no muffler on my truck. It really depends on the dealer. If they wanna be dicks they can be
Hi, I stumbled across this video last night. Great video 👍 My local shop will be installing the 2” ReadyLift billet spacers on the front end of my 2018 Ram 1500 next month. Question for you (sorry new to modifying) Should I also get the shop to install the ReadyLift UCA’s or will the spacers be good enough?
Thank you...
It’s not a bad idea to install the upgraded UCA’s.
looks are one thing, what about how it performs?
Steve, the consensus on using these on a 4th gen is that they ruin the ride, and its "The Cheap" way to level it over using a set of say Bilstein 5100 adjustable struts. Could you ask the fellas there why these spacer kits work on the 5th gen, and not so well on the 4th gen? Yours isn't the first channel I've seen on doing the space on a 5th gen.
Travis, it’s the customer’s preference. It won’t be the direction that I will be going with the Rebel. I’ve had the Bilsteins on my 2012 1500 & liked them.
Info about the safe please. Did I missed a video about the Rebeld?
In the video description
Was this truck a 4x4 or 2x4? I’m looking for a leveling kit for my truck but mine is 2x4.
4X4
Any issues with the upper control arms Geometry?
Have you seen or heard of anyone installing a pro comp nitro kit on their 19 ram? Its a 2.5” front and 1.5” rear.
I haven’t
Great video, could you run a 33x12.5x20 on a stock rim With a 2.5 level kit? Or would you need a spacer?
Thanks, 33X12.5" will fit w/ the level, but always take the wheel off-set into consideration.
They must pay police officers well up there lol, ours in Mississippi ain’t affording any Cummins ha
Need a level kit for 2019 ram 1500
Do u have a link? 2wd
Hit up the JP Shop
2wd
If i add blocks to my 2017 ram. Should i be worried about my ball joints coming apart?
yes
Nice truck, if it was mine bigger lift and 40's
1234 _8314 if it was yours...
I put some 24s on mine
How much did all that came out to $$$$
@beast hey man been watching your channel and loving it so far
Was wondering if you could take a moment and answer a question that's driving me crazy! Please help lol thanks
I have a 2019 5th (new body) gen ram big horn and I'm looking to order a 2.5 level kit with 22x12 wheels my question is am I stuck with 33s or can I put on 35s? I dont mind rub at full lock and wont be off roading at all. Do you think I can clear 35s with just the level kit? Thanks for your help thanks for all the content also
Thank you for watching! It's definitely going to be tight with 35's on 22X12 Wheel with only 2.5" Leveling kit, but I've seen people do it.
Hello! Do I need to do a wheel alignment after I lifted 2 inches my truck front and rear
Yes
Hey nice video any rubbing or having to cut any wheel well stuff ?
Some minor trimming of the lower front bumper valance.
What is the safe info ?
I used RAMBEAST on the Locker’ Down site and it shows as an invalid code.
i have a 2017 ram 1500 2WD. is there a leveling kit for it that i can use?
Contact the Jp Shop, 610-458-1977
Hi.. nice video. What is the music track you used?