How to cut in using masking tape (baseboards and door frames) avoid paint bleeding
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- Harry Anstice, decorator for 30 years shows you how to cut un using masking tape his way, quickly and effectively.
- แนวปฏิบัติและการใช้ชีวิต
I have watched this vid numerous times when decorating and this is the best method for a straight edge. Thank you!
That's bloody impressive . I will be trying this method as I hate cutting in .
Hey Harry. Your right, I just needed a bit of practice. Great way to get a straight line. Need to do this a bit more to get it just right. Great tips thanks.
Leonard Martin: You're welcome. I'm glad it worked out in the end. It's a great feeling when you slowly pull the tape away and get that perfect line
🙂.
Harry - this has really helped me. Keep up the good work!! Best wishes. James
Thanks for the great feedback. Happy Easter. Regards H
Elaine Muse: I am so sorry when reading your lovely comment. While replying I accidentally deleted both your comment and my reply. I hope your cutting in goes well tomorrow. Thanks for watching the video. And if you have time do let me know how it went🙂 Regards. Harry
Hi Harry. Great video. My question is...
If using and oil based gloss for wood frames and baseboards, would you still be able to apply same method?
Mandy Gould : Hello. It should work fine as it’s ok to paint oil based paint over water base. But not the other way round. Regards H
So with the Skirting the tape is right next to the wood.
You paint over the tape slightly onto the Skirting with the wall paint. Wait for it to dry
and then carefully gloss over the Skirting and tape and peal away? Whilst the gloss is still wet?
Very strange but your finish is brilliant.
May seems daft but would be nice to see you apply the tape. Other similar videos don't do your method but probably use expensive tape. Your method seems excellent.
No more comments I promise 😅
Hello again. Peel the tape away before the wood paint has dried. But not while it’s new. Wait a little while until it starts to get a little tacky.
If you remove it when it’s completely dry it can occasionally tear.
If you have any more questions it’s no problem to write to me. I tried to cover everything. But you always forget to mention something when doing a demonstration so it’s good that people ask.
Best wishes H
The tape on the door trim should not be installed at half point in the radius of the caulking, but should cover the caulking and go up on the side of the trim about a 1/16". That way when you look at the trim at 90 degrees, you will see a sharp line, instead of a wavering line if the tape covered the caulking partly.
It’s informative and helpful tips like yours put so eloquently that just ad to the quality of the video.
Any additional information or advice from people such as yourself is greatly appreciated 👍👍
Regards H
I took the masking tape about Half a mm away from the caulk to make as straight a line down the wall as possible.
I think what you suggested would work better if the wall was uneven.
But I think it would be a little tricky for a home DIYer.
Luckily the wall was very straight so the finish result was quite satisfactory.
But thanks again for the tip. H
I find what works good to is using a 1'foot guide perfect results everytime..
Hello Harry,
ive just painted my walls and my lines look awful as some of the wall has been missed due to my original tape job, after seeing your video ive realised my mistake of taping the top edge of the skriting first.
my question is - if i paint the top of my skirting with no tape to fix my lines and then tape the wall and paint my skirting will i end up with the same result as this video?
Thank you
@@quaidmccormack Hello.
Probably not. Unless you are going to paint the skirting leaving a small gap away from where you are going to apply the tape.
If you use my method you should always apply the wall paint first. But make sure it has dried thoroughly before applying the tape. I hope I have been able to help. Regards H
Hello again. After I read your message again. I realised that by the top of the skirting you were probably referring to the wall. In which case it would work. But as I said in my last comment let the paint dry thoroughly before applying the tape.
@onceuponawall-harryanstice2529 thank you for your advice :)
@@quaidmccormack Very welcome.
Great vid Harry. Would this technique work if the first coat of white was an acrylic undercoat to ensure that the dark paint on the skirting is fully covered? Am concerned about this making the tape hard to remove and creating an untidy line. I'd then gloss.
Pritpal Warner : Hello. Thanks for the kind comment 🙂Yes the technique would work very well if you used a white acrylic undercoat for the first coat. To avoid damaging the tidy line I always remove the tape before the last coat of paint is completely dry. Regards H
Thanks Harry
Welcome 🙂
Thanks Harry, great tip - How long do you leave between coats? If it is important to remove the masking tape before the paint dries.....do you wait until the previous coat is fully dry before applying the next?....also - I've tried similar technique before and found the masking tape has lifted some of the paint from the wall when I remove it....how can this be avoided? Thanks
Hello. Thanks for writing. I will try to answer you as best I can.
It is always important to let each coat dry before applying the next coat otherwise the paints (if wet) can blend into each other.
But when removing the tape, make sure the paint hasn't completely dried. This helps stop the masking tape lifting the paint when you remove it. Also
sometimes when you remove the tape it can lift the paint if the tapes too sticky. So check when you buy masking tape that it is specifically for interior painting as inside and outside tapes can vary allot. All the very best: Harry
Thanks Harry!
@@terryscott4132 It's called masking tape for dedicated surfaces it comes with 1 day to 60 days, I brought 10 days one. I paid a few dollars more but it's worth it. The results are amazing. Get more confident. @Paint and decorate A to Z by H Thanks For sharing your Wisdom.
the method seems to defy all reason, but results are impressive !
I know just what you mean. I did a demo a while ago and the people watching were thinking w t f until I removed the masking tape.
@@onceuponawall-harryanstice2529 thanks Harry, appreciate the tips. BTW if I want to make the 'line' between paint colours (grey skirting, white wall) where some caulk is located, is there anything to consider? ie line will be right on the caulk
Iain Stewart it shouldn’t be a problem. These joins are caulked. Just make sure the caulk is dry.
Actually makes sense.. The initial and only bleeding happens with the grey first paint. The next 2 coats of woodpaint simply lay on top because there are no open spots where bleeding takes place
this is all fine and dandy but what if we don't want to paint the door frames and skirting?
Hello. This is just a method for getting a near perfect straight line. You can always do it freehand. Or just cover the doorframes or skirting with the tape. The painting over method is just to stop paint bleeding. Have a great weekend. H
@@onceuponawall-harryanstice2529 thank you :) I like your method but my skirting is already painted. I’m in a new build.
@@GothicKittyMadness Very best of luck in your new home 🙂
I wanted to see you paint the skirting near the floor boards…did you push a card sheet underneath the skirting?
Hello. Thanks for writing to me with your query. No I painted freehand. After many years of practice I have a very steady hand. Regards H
I have another video. How to cut in freehand. But that’s wall to ceiling.
Maybe it’s time to upload some more videos 🙂
@@onceuponawall-harryanstice2529 thanks
You might want to mention for your American viewers (and possibly those from other countries) what you mean by masking tape. In the U.S., you do NOT use masking tape (usually a cream color), which is very sticky. You use specially made painter's tape (usually blue or green), which is much less adhesive and removes easily, without taking the paint (or drywall) with it.
Hello. Thanks for writing in. A very good tip.
I used the term masking tape as I thought it would be the most explanatory as a general term.
It is called masking tape or frog tape in the UK. I understand that most countries have different words or spelling for different things eg color/ colour but hopefully the advice is universal.
Thanks for watching my video. Have a great weekend H
@@onceuponawall-harryanstice2529 Well, you technically use painter's tape to mask certain areas, so it is masking tape, making things more confusing! Frog Tape is actually a brand name, but people use it like they use Kleenex, Band Aid or Thermos, Coke or Vaseline when talking about all products in those categories, regardless of brand.
@@nickedmonton8223 just like Hoover becoming a verb 🙂
Hi, does the masking tape have a gap between the skirting board and the wall or is it flush up to the skirting board? Thanks for this video
Hello! Good question. In this case the masking tape is flush with the skirting. But it can be a good idea ( although a little tricky for beginners) to have a gap between the skirting board and the tape if the skirting board is uneven.
Harry Anstice do you have any vids of applying the masking tape? This would be really useful, but many thanks for this video it is very good
Paul Lewis: Thanks for the kind comment. I'm sorry I don't have a video on how to apply the masking tape. You're not the first person to ask about that and it's a very good idea🙂 So I think I should try to upload one soon. All the best H
Harry Anstice Do you paint the wall all the way down to the skirting first and not worry if you get some on the skirting, allow to dry then apply the tape?
Paul Lewis: Yes that's exactly how I do it 👍
Do u have to let the dark paint dry 1st?
Hello. Yes the wall paint should dry otherwise the white paint will bleed into it 🙂. Regards H
hello uploader can I ask, if are you aware of the channel painting and decorating run by two brothers. thanks
PS I have been in this trade for 30 years and I can not be that accurate but not a million miles away, by the time I was too fluff about with yards of masking tape I could have gotten much further on closing up a job. thanks but good upload, interesting but not for me x
@@2010gtoner No problem. Each to their own👍🙂
No . But I will look them up.
www.youtube.com/@PaintingandDecorating
@@2010gtoner Thank you. I have already checked them out.
now i get it, ;) thank you, top tip
Hello Harry, will this work if you use oil based undercoat then oil based gloss? I thought it would dry too thick and you won't be able to pull the tape off without it tearing? Thanks.
Dan W : Hello. It should work. But remove the tape before it drys. Let it get tacky (almost dry) that usually helps to avoid tearing. Regards H
@@onceuponawall-harryanstice2529 cheers Harry. Love the videos, very helpful. Thanks 👍🏻
Dan W : welcome. Thanks for watching.
@@onceuponawall-harryanstice2529 Harry, on your video using the same technique but for the ceiling how would I cut a ceiling in if you haven't got the wall colour. Someone I know has had a leaking bath and its stained the ceiling but they want the whole lot doing.
Dan W : Hello again. Sometimes when I’m painting a bathroom ceiling but not painting the walls I paint freehand. But if you want to use tape but still want to stop paint bleeding under the tape. You can apply the tape then apply a thin line of caulk where the tape meets the ceiling and take your finger round it so that there’s just enough to work as a stopper for the paint. That way you get a nice sharp line🙂
Harry mate. ..I've been painting a hallway wall and on one wall there are no roller marks but on the other there are visible strips. .. is it because of the natural light shining on that particular wall? Any suggestions plz
boaby boy : Hello again. It can be natural light. If it's a wall by a window it can show all sorts of discrepancies. You can check the other wall by shining a torch light at it from an acute angle. But to avoid roller marks on the wall you have to check that the roller is clean before you start. If you put the roller down don't leave the roller un covered for too long as the paint tends to dry first at the ends of the roller thus causing marks. Start from one side of the wall working your way to the other end using long but reasonably light strokes from top to bottom. And never stop for a break in the middle of the wall, keep going until you have finished. I hope I was of some help regards H
Harry Anstice cheers mate great advice as usual 👍👍
What tape is best? My concern is pulling the paint off
Hello. The best one to use is the yellow masking tape as it’s not too sticky. In some countries it’s called frog tape that can also be green.
When buying the tape always tell the shopkeeper what it’s for just in case you buy the wrong one. Regards H
@@onceuponawall-harryanstice2529 ok thanks 👍
Very good but not clear on what paint is dry and when to remove. It’s like I missed a first half
Hello. Sorry that I didn’t explain clearly enough. When I do all the coats I let them dry between each coat. Except for the last one.
I like to remove the tape when the paint is almost dry but still tacky. I find that helps avoid any tearing. Regards H
@@onceuponawall-harryanstice2529 Greatly appreciated, we’re redecorating our living room today!
That must be oil based gloss.. mad coverage
It’s actually water based. Nowadays practically all indoor wood paint is water based.
It does leave a lovely finish. But has a much quicker drying time so less room for error.
Do you do this professionally great results
Yes. And Thank you.
@onceuponawall-harryanstice2529 because I was thinking of doing a few painting jobs for extra cash. Was thinking they might think not very professional looking. Thank you for your quick reply. You deserve more views
Is it easy release yellow frog tape that you are using? Thx
Yes. It is made specifically for this kind of job. Have a great weekend. H
@@onceuponawall-harryanstice2529 if it’s yellow frog tape and the idea behind the technology is when moisture hits it, it seals. So do you ever run a damp rag over the tape seam prior to applying the paint? Thx
@@tundrawhisperer4821 I have always found that you can never completely rely on these new technologies. So I like to paint the first stroke with the wall colour in case of any bleeding. But wiping first with a wet cloth then using the paint technique would be very thorough. But I have never done that myself. I find just painting is has always been perfectly sufficient. But maybe I should give it a try 👍🙂
@@tundrawhisperer4821 When I made this video. The yellow frog tap with the swelling technology wasn’t on the market here. So in this video I didn’t wet the tape first. But it can’t do any harm to do that. I’m just a little bit old school as they say. Have a great weekend.
And I think Tundra Whisperer is such a cool name 🙂
so any bleeding will be filled by the wall colour
Yes the first coat acts as a sort of stopper 👍👍
@@onceuponawall-harryanstice2529 the principle would be the same if i masked the skirting instead of the wall and then started white then 2 coats of the wall colour ?
@@brucedickinson12 Hello again. It could and should work that way.
But personally I would apply the tape to the wall. 👍
i tried it but i think my wall was not dry enough as when i removed the tape some of the wall paint came off as well , cheers though its a great idea ,
@@brucedickinson12 The tape will only take dry paint from the walls if
1 The paint hasn’t fully dried
2 The walls haven’t been primed properly eg painting directly onto a dusty or old wall without the proper preparation.
3 Or the most likely thing. The tape being too sticky or possibly leaving the tape on for too long.
All the very best H
What brush are you using?
Hello. I used a 5cm medium haired slanted paint brush especially designed for painting woodwork 🙂
I recommend Stodoys plans to every beginner and not only.
i don't understand it
Hello. It’s very straightforward. Just watch it again and it will all make sense.
It’s exactly the same principle as my other video’ How to cut in using masking tape wall to ceiling 🙂
@@onceuponawall-harryanstice2529 my masking tape always pulls paint off with it
@@onceuponawall-harryanstice2529 Thanks for replying.
so masking tape on.
paint over in wall colour..allow to sr6 and then paint over in ceiling paint.
however how dp we remove tape and not paint;)
@@christistruth3112 Hello again. Paint the first coat with the wall colour. Then use the ceiling paint. Paint 2 or 3 coats and remove the tape when the last coat is almost dry but not completely dry.
And important to remember to use proper tape for cutting in. Have a great weekend. Regards H
Doesn't work at all
Leonard Martin: I promise it does work. I've been using this method for many years with great results. Maybe you just need a little practice. All the best H
It really does work. I've tried everything to get perfect edges but this is the only thing that works. If you search youtube you will see many videos on this and all teh comments say it works. Not sure what you're doing wrong tbh
It does work
It does. You aren't doing it right.