MIP DRIVESHAFTS // for the Traxxas Slash 4x4 “ULTIMATE BASHER BUILD”
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- In this video I install MIP X-Duty Driveshafts (# 18140 Rear) and (# 18150 Front) as well as a Tekno Big Bone Center Driveshaft (# TKR6855) onto my Traxxas Slash 4x4 “Ultimate Basher Build”
Check out the ChicagoLandRc website -
chicagolandrc....
Use Code : chicago10 for 10% off of your purchase at checkout
MIP X-Duty Driveshafts (Front and Rear) for Traxxas Slash 4x4, Stampede 4x4 and Rally - Part # 18150 and # 18140 -
chicagolandrc....
MIP Hex Drivers Metric (2.5)(2.0)(1.5) -
chicagolandrc....
Tekno Big Bone Center Driveshaft for Traxxas Slash 4x4 -
amzn.to/3N4ACoR
Those are the toughest driveshafts made for Slash 4x4…… when assembled correctly.
Thanks Nolan.
I do like how strong they are…I don’t like the lack of a pin hole in the stub axle though
need to be a rocket scientist to build these axles
Basically lol
Now after watching the video, I see the included grub screws are long now! Upgraded since I bought mine! 😊
Ok….that’s a good thing they included longer grub screws
I have the mip’s on my slash and have not broken them but the set screws come loose. I bought some long set screws and drilled the traxxas output shaft holes larger for the set screw to go clear through and no more problems.
Oh ok I gotcha
omg this is the ONLY brand that i haven't yet tried on the Traxxas HOSS. that **** *** ******* **** **** RC and me gonna have a come to jesus moment. 😂🤣
Yeah we will see how they hold up
Thank,s for this vídeo! I enjoy with your Chanel! I whaching from Spain!
Appreciate it man!
I would strongly recommend getting the Traxxas metal axles! Recollectively have broken the MIP! Snap them right at the ball..
The only problem with the mip axle’s are the pins do come out from driving and bashing… I fixed mine by putting clear fingernail polish on both sides of the pins… it’s working great so far..
I put red lock tight on the grub screws holding the pins in place so I’m hopeful they won’t come out 🤞
Good choice. I use these on my 6s slash. I have broken the axle shaft where the wheel mounts twice. But I still think they are the strongest avail.
That’s surprising you’ve still broken them……I’ve heard they are nearly indestructible….but I guess everything is breakable
@@RCKnockout yeah. It may have partly been user error. I'm not sure. But it involved the set screw cutting into axle shaft either from loosening or shifting somehow.
@@modzilla74 I gotcha…..it’s alright, stuff happens…..at least it came with extras
I got a copperhead cuz you had one and I melted it on 4s😭 upgraded to mamba monster x and 1717 motor but now it eats driveshafts every single run, dropped 80 on the mip I hope they hold up
That’s a bummer….I wonder if you received a faulty one…I haven’t had any issues with mine…I can tell you whenever you do add more power the weakest part of the car ends up breaking…really requires upgrading everything lol
I haven’t broken a tekno shaft. I had them on my hoss. Ran 8s a few times for shits and giggles. No issues. Also liked the bigger bearings for the hubs
I could see how the bigger bearings could be a benefit
@@RCKnockout I have a 6s slash running tekno shafts all around. It’s a little over 100 with shafts,cups,hub carriers(front,rear),bearing,etc. Haven’t broken anything. Super easy install. The shafts will handle 8s without a doubt.
@@Jobro_Ya_Know I thought the Tekno shafts were cheaper than that actually?
@@RCKnockout they are about 44 a set. I forgot about the hexes and battery tray extender. Just under 90 for front and rear
@@Jobro_Ya_Know oh I gotcha
I heard that the new MIP’s are different now. I also run the techno no problem as of yet.
I didn’t know the MIP shafts are different now
@@RCKnockout I bought mine back about 7 years ago. Oh ya that grease should help them not to rust. Mine did didn’t come with the grease either. Sorry about the break I was waiting for the big jump too…
@@keeponrcnbrianmiles4207 alright thanks for the info!
I run the mip for the 2wd great drive shaft's
Good to know!
Thanks for the great vidoes. Im just getting into the rc world. Got a traxxas slash 4x4. Drive shafts are expensive but think be worth it. Just went through a set of the traxxas upgraded plastic ones. Seems like all of them break at the ear of the yokes. Not sure if rocks are hitting them or just the torgue of 3s battery power. Was wondering if you had a vidoe on shock positions. Still trying to figure out best position for a better ride and handling. Thanks again for all your information.
The more leaned down the shocks are the better it will handle so the inner most hole on the shock tower and outermost on the suspension arms…..yeah the plastic gets fatigued and breaks right at the ear of the yokes…..that’s a constant issue with those style of plastic driveshaft
Same place mine were breaking.
Yeah it’s definitely the weakest part of the driveshafts
Try the Tekno M6 when these break
These better not break lol
What’s better drywall tape and shoe goo or gorilla tape
Shoe goo works a bit better….but not by much in my opinion….I usually do the gorilla tape cause it’s easier and way less messy
I notice you haven’t upgraded the plastic shock caps. I have seen on many other videos this is a top upgrade. What is your opinion?
Well I haven’t had any issues with mine tbh
Thx for the upgrade vid. I gotta get better driveshafts for our rustler 4x4’s
What are you using instead of the slipper clutch
Thanks! I’m using the Traxxas Hoss center diff
Thx I’ll have to get a couple
@@rccat6059 no problem
so where does the weak point shift to?
Wheel hexes spinning is usually the biggest problem now
The screws keep on losing up even with blue thread locker
Yeah you might wanna try orange lock tight
So did you order more Locking Hexs and not sand them down as much? Do they work?
I did…..they do work….it still is kind of a pain with these driveshafts though
I had them all i like the tekno ones better
Interesting…..what was the issue with the MIP?
I would just brake the end of stud axel off all the time where the wheel bolts on i only use mine for heavy bashin and the mip ones are a heavier axel so i would blow bearings out faster with mips the tekno ones i have yet to brake one yet and i send mine at skatepark only thing that happens with tekno is bone gets a lil bent but who cares they work fine but both are better then the plastic ones!
@@RippinSupplyCo I gotcha