Very very nice video sar Sir aapane Delta ki kafi sari power supply riper ki he uasme comen problem pfc section ka he to uasapar Ek video please 🙏🏻 🙏🏻🙏🏻
Sir. Where do you get all this boards? They all seem to be same maker and model and they are all same dirty inside ;) Great job. You are an amazing teacher!
Salaam alaikum, nice investigation as always. Please at 08:47 you find a faulty diode with marking 5IN. Included in video description as well. I cannot find any datasheet for this marking. Can you help?
Hi. Thanks for great video. What is it called the soldering gun that u are using. It's solder n suction together in one? And also the copper mesh that aucka the lead, what is it called? I have a few power supply not working. 1 has a problem when power ON, no output wait for about 15min then has output. Why?
desoldering gun is WELLER WR3M rework station copper wire is called DESOLDER WICK or DESOLDER BRAID if your power supply is starting very late, might be VCC capacitor problem or might be startup circuit problme
Dear Mr. Haseeb, when you clean flux from circuit board, can you use 90% isopropyl alcohol or must it be 99% alcohol? 99% is hard to find in my city, and quite expensive at the one location that sells it. Thank you and thank you for sharing your knowledge with us.
Haseeb how it's possible that this worked with PFC mosfet installed in the wrong way? I suspect that the gate was grounded, and source was connected to PFC IC. Vgs treshold is relativly low (at several volts) so mosfet was practically conducting 400V to PFC IC the moment it left factory...
i think it is already got a repair attempt from some one. as the soldering is visible on PFC MOSFET, and secondary power section power mosftes were also re-soldered i think by mistake of repairman, the mosfet blasted the remaining circuit as the FAIL sticker is placed by the end user, when any items gets malfunctioned during operation so this fault was not from factory. it is human error of technical repair team
Sir i am dealing with a falty supply 12v small one. When is outputing low current is working without noise but when is outputing normal current for my tv box is making noise and causing to freeze my device. When i connect it to a lower current device it wasn't noisy. Is it high chance to be chip problem?
Good evening sir. Today I have tried to repair one LG double door inverter refrigerator pcb . I can't find a datasheet for one ic. When I try to find in internet, but can't find the sheet. Kindly help me in this please. Thank you sir. The IC number is ATMLH851 45DL CN 185105K. This the full numbers printed on the ic. I have sent you picture in what's app. Please take a look. The last three digits are of my mobile no is 462. Thank you. Kindly help me sir.
How did you recognized the burnt resistor values ?
He already had the same smps model.
I have approximately 25 same model power supplies
I think 7 or 8 repaired.
I got values from similar model power supply
@@HaseebElectronics Got it 👍 thank you
Another excellent repair, thank you Sir. The camera view is very good! You make the soldering look easy on those tiny SMD components.
it is my pleasure
Excellent thanks for sharing this informative video
Very very nice video sar
Sir aapane Delta ki kafi sari power supply riper ki he uasme comen problem pfc section ka he to uasapar Ek video please 🙏🏻 🙏🏻🙏🏻
yes brother
i have around 25 power supplies. i will share a detailed comparative study and its faults
Informative vedeo. Thank you so much. God bless you. What is the main reason of mosfet shoting in smps. Pls describe.
First time I've heard you say, "Oh my god!" lol.
May Allah reward you brother
thank you very much sir,you are the best teacher...god bless.
You are most welcome
I love your job❤
Thanks for videos. What is your cleaning fluid you use with the toothbrush?
Normally I ues isopropyl alcohol 99%
I also use electronic contact cleaner 99 grade
Thinner
Sir. Where do you get all this boards? They all seem to be same maker and model and they are all same dirty inside ;) Great job. You are an amazing teacher!
Salaam alaikum, nice investigation as always.
Please at 08:47 you find a faulty diode with marking 5IN. Included in video description as well. I cannot find any datasheet for this marking. Can you help?
wa alaikum salam brother
5IN is SOD123 package MMSD4148 switching diode 100V 200 mA with TRR 4.0 nSec
Nice work sir
Thanks brother for sharing........
Simply great!!! Thank you.
it is my pleasure
Respected sir, very brainy job.very easily diagnosed. Very very good 👍. sir where this SMPS is used. Good day sir 😊
selamun aleyküm hocam maşallah süpersin RAMAZANINDA MÜBAREK OLSUN
ve aleyküm selam. Hayırlı Ramazanlar
Mr. Haseeb, good day. Can you post an audio amplifier (1000w-2000w) repair video? Explaining the working principle one by one in detail
Good morning 😊👍🏻
Good Evening
Hi. Thanks for great video. What is it called the soldering gun that u are using. It's solder n suction together in one? And also the copper mesh that aucka the lead, what is it called? I have a few power supply not working. 1 has a problem when power ON, no output wait for about 15min then has output. Why?
desoldering gun is WELLER WR3M rework station
copper wire is called DESOLDER WICK or DESOLDER BRAID
if your power supply is starting very late, might be VCC capacitor problem or might be startup circuit problme
Informative vedio
Attention Risk electric shock . Good video !
Yes
In case of small carelessness, There is big risk of fatal electric shock
Safety and attention must be observed all the time
Dear Mr. Haseeb, when you clean flux from circuit board, can you use 90% isopropyl alcohol or must it be 99% alcohol? 99% is hard to find in my city, and quite expensive at the one location that sells it. Thank you and thank you for sharing your knowledge with us.
Please explain rhe active pfc circuit
Love you sir g ❣️😘😘😘😘😘
Love you brother
God bless you
👍
Haseeb how it's possible that this worked with PFC mosfet installed in the wrong way? I suspect that the gate was grounded, and source was connected to PFC IC. Vgs treshold is relativly low (at several volts) so mosfet was practically conducting 400V to PFC IC the moment it left factory...
i think it is already got a repair attempt from some one. as the soldering is visible on PFC MOSFET, and secondary power section power mosftes were also re-soldered
i think by mistake of repairman, the mosfet blasted the remaining circuit
as the FAIL sticker is placed by the end user, when any items gets malfunctioned during operation
so this fault was not from factory. it is human error of technical repair team
Nice
Hello.. what is PFC what means?
power factor correction, i will make a detailed theory + practical on this topic very soon
👍👍👌👌🙏🙏
How to connect STR module on this type SMPS.?
AT 4.20 LOL😂😂
what is vcc?
vcc voltage is supply volatge for pfc controller NCP1654 and smps controller UC3845 ICs
these volatge are working voltage for these ICs
Legal
السلام عليكم
متكمل الفيدوا كلة بالعربي ولا صعب
Sir i am dealing with a falty supply 12v small one. When is outputing low current is working without noise but when is outputing normal current for my tv box is making noise and causing to freeze my device. When i connect it to a lower current device it wasn't noisy. Is it high chance to be chip problem?
Please mension the parts no. When u measure and or change jazakallahu khairah
Ohh My GOD, very Good video
Thanks a lot 💕
Good evening sir. Today I have tried to repair one LG double door inverter refrigerator pcb . I can't find a datasheet for one ic. When I try to find in internet, but can't find the sheet. Kindly help me in this please. Thank you sir. The IC number is ATMLH851 45DL CN 185105K. This the full numbers printed on the ic. I have sent you picture in what's app. Please take a look. The last three digits are of my mobile no is 462. Thank you. Kindly help me sir.
th-cam.com/video/7BiJjhWx9G0/w-d-xo.html