Hey my friend tomorrow I am going to talk to a gentleman at a local speed and fabrication shop about putting in a CF Moto 300 SS engine in my papio SS I sent him a picture of my engine and a picture of the 300 SS engine and he says that the difference in size is minimal and that the mounts are exactly the same on the rear and the front the only difference is the top does not have the hanger from the top which can be fabricated very he's going to look over my bike tomorrow to see if the fit will work and if also I can find a good spot for a small aluminum radiator I will let you know what I find out my friend have a great week
Hey buddy. Nice. Hope everything will be ease for your project. If possible, maybe you can document the process and record videos of the journey. I’m sure a lot of papio owners out there eager to see it in action, and maybe it will help a lot of us papio owners in knowing what to do and what to avoid when doing the upgrade. Have fun and stay safe.
@@KondifenRacingSchool you will be the first person I reach out to you tomorrow after I find out if this is going to work or not and if so I will definitely document everything I possibly can about it because I would love to help others put themselves in a position to do the same exact process and avoid most of the errors involved from talking to him it seemed pretty straightforward he thought as long as the cylinder head is not too tall because he believes The jug AKA gearbox is going to be the same size and he didn't seem too concerned about finding a place for a place for a radiator so I'm keeping my fingers crossed until tomorrow he seemed pretty excited as far as the electrical probably matching up and being able to use it hopefully anyway I'll reach out tomorrow
@@Joe-wv3pe can’t wait to hear the update. Thank you for sharing with us. Hopefully everything will turn out well in our favour. #papiolife forever. Hehehe
@@KondifenRacingSchool hey buddy took my papio into that Fab shop today along with the pictures of the 300 SS engine he told me to go cruise around for about an hour and get some lunch and come back and he would let me know so he could do some research and I am happy to say that when I returned he said he could easily swap that motor out the only real concern he had was the exhaust manifold getting in the way of the down tube of the frame in the front but he said he could definitely figure something out for that and said it was just a minor issue as far as the gearbox he said the gearboxes are the exact same size and the mounting positions on the gearbox for the frame are in the exact same spot and a lot of the stuff on my bike we can still reuse he said it wouldn't be too costly but it will cost a little bit so I am going to go buy that used 300 SS engine this weekend and I will definitely document all of this to share with you I'm pretty excited now that I've got the green light so I will be in touch have yourself a wonderful day my friend
@@Joe-wv3pe this is a great news indeed my friend. On behalf of all papio owners, we are looking forward to watch your video and the progress of your build. This going to be exciting. Did the mechanic share the estimate days for the swap to complete? Thank you so much for the info shared. Ride safe buddy and enjoy.
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
😂😂😂😂bederau jap.apa.pun nice bro
😮😮😮😮lepas😅
Memang last entry dive. Dia kata nak merasa. #memangcamtu katanya. Tapi last sekali tu best. Sampai ke kedai kuning geram dia. Hahaha
Hey my friend tomorrow I am going to talk to a gentleman at a local speed and fabrication shop about putting in a CF Moto 300 SS engine in my papio SS I sent him a picture of my engine and a picture of the 300 SS engine and he says that the difference in size is minimal and that the mounts are exactly the same on the rear and the front the only difference is the top does not have the hanger from the top which can be fabricated very he's going to look over my bike tomorrow to see if the fit will work and if also I can find a good spot for a small aluminum radiator I will let you know what I find out my friend have a great week
Hey buddy. Nice. Hope everything will be ease for your project. If possible, maybe you can document the process and record videos of the journey. I’m sure a lot of papio owners out there eager to see it in action, and maybe it will help a lot of us papio owners in knowing what to do and what to avoid when doing the upgrade. Have fun and stay safe.
@@KondifenRacingSchool you will be the first person I reach out to you tomorrow after I find out if this is going to work or not and if so I will definitely document everything I possibly can about it because I would love to help others put themselves in a position to do the same exact process and avoid most of the errors involved from talking to him it seemed pretty straightforward he thought as long as the cylinder head is not too tall because he believes The jug AKA gearbox is going to be the same size and he didn't seem too concerned about finding a place for a place for a radiator so I'm keeping my fingers crossed until tomorrow he seemed pretty excited as far as the electrical probably matching up and being able to use it hopefully anyway I'll reach out tomorrow
@@Joe-wv3pe can’t wait to hear the update. Thank you for sharing with us. Hopefully everything will turn out well in our favour. #papiolife forever. Hehehe
@@KondifenRacingSchool hey buddy took my papio into that Fab shop today along with the pictures of the 300 SS engine he told me to go cruise around for about an hour and get some lunch and come back and he would let me know so he could do some research and I am happy to say that when I returned he said he could easily swap that motor out the only real concern he had was the exhaust manifold getting in the way of the down tube of the frame in the front but he said he could definitely figure something out for that and said it was just a minor issue as far as the gearbox he said the gearboxes are the exact same size and the mounting positions on the gearbox for the frame are in the exact same spot and a lot of the stuff on my bike we can still reuse he said it wouldn't be too costly but it will cost a little bit so I am going to go buy that used 300 SS engine this weekend and I will definitely document all of this to share with you I'm pretty excited now that I've got the green light so I will be in touch have yourself a wonderful day my friend
@@Joe-wv3pe this is a great news indeed my friend. On behalf of all papio owners, we are looking forward to watch your video and the progress of your build. This going to be exciting. Did the mechanic share the estimate days for the swap to complete? Thank you so much for the info shared. Ride safe buddy and enjoy.