ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Render cleaning Somerset, K-rend clean, steam cleaning, kerb appeal restoration. Subscribe for more
ฝัง
- เผยแพร่เมื่อ 3 มี.ค. 2019
- When the render is looking dirty on your home. When it is covered in Black fungi, red Trentepohlia or green algea. When it has a lot of lichen spots attached to the surface. There are ways in which the natural beauty can be restored and return the kerb appeal. Cold pressure washing is not advisable as that can cause permanent damage to the very soft surface. Pressure washing alone will not deal with the root cause of the problem because it only cleans but fails to kill any organic growth attached deep in the pores of the surface. With a combination of correct cleaning solutions to treat the root cause and the use of low pressure heated steam to remove any dirt from the surface, you will be able to restore the surface to a good and clean condition whist minimizing any risk of damage. The process remains the same for cleaning painted render, cleaning k-render, cleaning monocouche render. Kerb appeal can increase the value of your house when selling. Kerb appeal can be a powerful negotiating tool if your buying a neglected home. acleanerexterior.co.uk/
![เจ้าผู้เดียว - ดิด คิตตี้ [OFFICIAL MV]](http://i.ytimg.com/vi/q0NLCYKBOTo/mqdefault.jpg)
Wonderful job and such care taken with their property! Love your work!
That was an encouraging video. You cleaned a place in severe need and worked through the difficulties. The paving looked wonderful afterwards as well.
Thank you
Looks like magic! Great job
Great job lads 👏
Great video mate !!!
Absolutely fantastic!!! And I love the music too! Awesome job guys.
Thanks.
Great work
Great finish well done
P Lyons Thanks. Good to give the clients a reminder of the job
Good video thanks , nice music also 👍🏻
Bennetts Removals of Barry and Penarth Thanks
Great!
Nice work pal
Amazing
👍Really amazing! Nice video!!!
Thank you! Cheers!
What a wonderful job you did
It’s easy when you enjoy your work.
Could you please tell me which equipment do you use?
Good Job I noticed you was using a gardiner pole what hose did you run through the pole and what about the nozzle where can i get one . I take it the Hotbox runs along side your pressure wash and you was using it on the lowest throttle
That’s an old system now. Machine had a steam valve fitted to lower pressure and reduce engine for flow. We then designed and built or own machines.
Free quote, so how much was this one at the time to give us a basis please ?
What type of cleaner do you use to kill mold and algae?
white vinegar
👍👏
amazing results guys... What machine do you use to get your steam? looks like very low water volume.
It is a briggs and Stratton machine. 30lpm with a steam valve. it will run 150c at about 5lpm when we need it. Digital thermostat. Machine built to our spec. All of my machines are one off builds
@@acleanerexterior9238 who does your builds??
What do you do to prevent the mould coming back
A biocide maintenance spray application should eradicate the need for steam. Spray and go process.
it looked quite streaky
backyardbasher The final result was perfect. No streaks
How to contact the person , I will like a quote for cleaning.
Would normal pressure washing not be sufficient ?
No. It would cause permanent damage to the substrate. You can see a clip where the client had made an attempt
Hi guys, what nozzle did you use when steaming the dirt away and clean Fascias please
All depends on the size of the pressure washer. In this case we had onsite a 25lpm machine which is way to powerful to clean render unless you fit a steam valve as we did. The machine was running on tick over to reduce flow rate and the steam valve adjusted to drop pressure. Pressure was around 60 bar and i believe the nozzle was 25040. Temp was around the 100c mark. We now run electric purpose built units with another new unit in the final design stages.
Show me now 2022 video how it looks
I will when the client books in a maintenance clean and it willed a continued plan in place to stop it getting this bad again in the future.
do you have a plug in steamer?
I run 3 steamers. Two truck mounted and one portable
Why no hypo etc all over then just tackle the worst bits with the steam as steaming is so sloooooow
I prefer to use less chemical where possible. The building still required steam with or without gallons of oxidiser
Is that a steamer attachment or a complete steamer machine?
Russell Brooker We have a great range on our hotbox and the combination of steam valve on the washer allows us to tweak the heat, flow or pressure accordingly
What chemical did you use, was it a biocide or SH?
Combination of both. Bio at the start of the job. Few days to work and then steam and oxidiser to remove the black stains. Patience is the key on the bad ones.
@@acleanerexterior9238 yes I think patience is the key, I did a similar one recently, Algoclear pro which cleared one wall really nicely but took two applications over two weeks, but one wall just isn't happening, I'm back there next week and will put a weak hypo solution on it, that should do it but it's frustrating when one bit looks great and the other just doesn't
A soft wash would have been faster no ??
This was a combination of Softwashing and steam to remove the dead organic growth.
how come there is moulding everywhere ? constructions issues, it seems, inappropriate materials.
Just Mother Nature working. No construction issues.
song?
Faedraelina T Sorry but I can’t remember. It came from a royalty free site widely available on the web. Will try and look it up. Maybe Shazam can throw some light on it
Délicate Attention - Bertysolo
Oh hell naw
Wow great video! Check out my pressure washing when you have a chance
It needs painting after I couldn’t put up with the dirt never buy rendered house ewww
Unfortunately some people don't care they don't mind living in a s hole
Does not need painting. Finished results was good as new. Once cleaned, it’s very easy to maintain. This type of clean is relatively new in the UK which meant that people didn’t know how to keep the clean. We give clear instructions on how to maintain the finished result.
Best never to buy a rendered home many are covering multiple problems
Nice job, but that's one awful looking 'house'.
Not wearing a mask - you´d have to close your business right away here.
Why?
Silent movie "fucking useless"