I admit when i opened my box for my taillights i was a little overwhelmed of how installation was going to go but after this video it was piece of cake thanks bud
Thanks for sharing this video. I ordered them from Amazon, installed it yesterday (by installed I mean plug n play lol). They look awesome. 3 compliments from just this morning. I used led reverse light bulbs from F150leds (I got them as gift from them for a review). Thanks again for the video, it helped me make my decision.
After my years of being a automotive tech im not much of a ford guy at all, I like trucks that run. But they make a sharp looking truck. Ane a great video as well
There are no legit third brake lights available. Some looks shady to begin with. Other looks cool but cargo light doesn’t light up the cargo area (read useless) it points to the sky.
I bought a pair of them and my break lights didn’t work with them. Kept on faulting the BCM. Then i didn’t have any turn signals either. I’m not talking about hyper flash either. When clearing the codes and changing back to stock haven’t had the problem since. Pissed me off on the fact of buying them cause they do look sick but just can’t use them
Trey. I knew you were from CA before I saw your LP. I would guess out in SOCAL, the San Gabe Valley? I will have to outfit my 2012 F 150 with those rad head and tail lights. Thanks for posting.
Hey, any chance you could comment on the fit? I just got these and like them a lot however, one of them (drivers side) doesn't quite seat all the way even though all the holes line up. There's a 1/8" gap or a little more where you can see behind the tail light if you get up close. I noticed in your video that the drivers side didn't "click" into place and you gave it a few hits with your hand. Lemme know if you could. Thanks.
Very true. I now have water in my tail lights because you failed to mention that the bulb sockets twist in to the housing of the lights... Super cool. Not.
Craig Campbell Wasn't even Trey's fault...It's yours for not reading the provided directions thoroughly and now you have messed up tailights. Shouldn't even need directions if you know what you're doing but apparently you didn't lmao.
Craig Campbell I hope you’re joking. If you don’t know to twist the bulbs back in their socket, you didn’t pay attention to how you disconnected and probably shouldn’t be doing this yourself
I had led's from Recon and after 4 years they were so corroded that they quit working. I hope the Anzos are better. How is the visibility from the rear? I can tell the brake lights are visible but how about the tail lights of you don't brake?
I can’t believe so many of these manufacturers stay in business with so many poor sealing issues. With halogen not such a big deal but moisture kills LEDs quickly! How hard is it to seal the damn things. I found another set I like the look of and waiting on seller to tell me if I can take apart of if he will ship to me with lens not attached. I will seal it myself with marine sealer and then feel confident good to go for many years. Wish me luck.
OMG, i was wondering till now if I was the only one with these tail lights.... :) Glad to know i'm not. They are great, after 1 year still looking good. The driver side doesn't fit too well, but not bad
How are those Spyder headlights working for you? I have Spyder halo lights on my Ranger, but after about a year the protective coating is peeling off, making it look pretty bad up close. Have you experienced that on your headlights? Axial makes the same style light but are more expensive so I'm just trying to avoid having that same problem on the F150 I'm buying soon.
LOL dude a couple of glaring errors there ya numpty! First you need to clean off any areas you are using adhesive tapes, a good clean and then alcohol! Secondly the sockets that the bulbs used to fit in but now have the connectors need to be mounted to the new housing like they did to the old, you dont leave them dangling and have gaping holes water and dirt can get in!! Take your lights off and use the bayonet mount to clip the bulb holders where they go!!
And what you shoulda of done is show us the difference with the originals on (first, BEFORE YOU TOOK THE ORIGINALS OFF). Then show us your REPLACEments afterwards.
Listen I can tell you right now in a month or so you're going to be hearing some rattling going on in the back of your truck and those resistors are going to be bouncing around because you didn't bother to clean the surface that you're trying to stick them to just saying.
I jus don't like these, them plain leds that are on should be the stop lights, and them BUNCH of leds on should the tailights, I'm jus saying.🤢😳👎 No good.
I admit when i opened my box for my taillights i was a little overwhelmed of how installation was going to go but after this video it was piece of cake thanks bud
Glad it helped
cool to see the functionality of these tail lights, only seen pics online
Use alcohol spray and wipe the area before attaching the hardware
Phil the Mx M .. Ha! I was telling him to do the same but he didn’t hear me lol
Thanks for sharing this video. I ordered them from Amazon, installed it yesterday (by installed I mean plug n play lol). They look awesome. 3 compliments from just this morning. I used led reverse light bulbs from F150leds (I got them as gift from them for a review). Thanks again for the video, it helped me make my decision.
Awesome, I'm glad you're happy and thanks for your support!
Thank you for using the blinker, that’s why I came here before buying me a set
After my years of being a automotive tech im not much of a ford guy at all, I like trucks that run. But they make a sharp looking truck. Ane a great video as well
That’s funny. I’ve had my F150 for 6 years and not had one single problem so far.
@@billierenfro705 man six whole years!? Oh my is that even out of warranty yet?
@@roxastherogue I’ve had a GMC and Silverado and had a bunch of problems out of the GMC and a few on the Chevy Silverado. To each their own, I guess.
@@billierenfro705 hey if you can do what you need to do, I'll cheer you on all day. Its not my place to judge. But really 6 years and no issues?
So headlights and tell lights or aftermarket but yet that third brake light is Factory you need to get the third brake light
There are no legit third brake lights available. Some looks shady to begin with. Other looks cool but cargo light doesn’t light up the cargo area (read useless) it points to the sky.
GREAT! Sold me on it bro. Getting these for my girlfriends truck. Thanks
Love it! Use the link in the description and I get a small % of the sale to help my channel. Much appreciated 👍
Thanks for a great video. I installed my lights and followed your instructions. It went perfectly!
Great video. Cleaning the are for double face tape would have been better.
should of cleaned it off not just wipe the dirt
Have. Should have...
Amazon says it doesnt fit a 2014 ? Who to trust?
Wish they had those for the 04-08
Do they have somethin similar??
Those look sweet on your truck. Seeing this, I may get me a set now!
I bought a pair of them and my break lights didn’t work with them. Kept on faulting the BCM. Then i didn’t have any turn signals either. I’m not talking about hyper flash either. When clearing the codes and changing back to stock haven’t had the problem since. Pissed me off on the fact of buying them cause they do look sick but just can’t use them
We're they ANZO brand? They may have just been defective, it shouldn't do that
Ik it’s been like two years but did these leak any water I’m thinking about getting them
No leaking ever
Those are some nice headlights
Trey. I knew you were from CA before I saw your LP. I would guess out in SOCAL, the San Gabe Valley? I will have to outfit my 2012 F 150 with those rad head and tail lights. Thanks for posting.
Hey, any chance you could comment on the fit? I just got these and like them a lot however, one of them (drivers side) doesn't quite seat all the way even though all the holes line up. There's a 1/8" gap or a little more where you can see behind the tail light if you get up close. I noticed in your video that the drivers side didn't "click" into place and you gave it a few hits with your hand. Lemme know if you could. Thanks.
I seem to recall a slight fitment issue, but nothing big. Just an imperfect body line.
Trey, how are they holding up?
Can you send the link for the headlights you used? Thank you. The tail lights are sweet!
Sure! The ones I have are Spyder, but ANZO makes some too! amzn.to/2nOcPRQ
Nice truck man, I recently bought one with 8’ bed thinking it was unique but.. nope lol. In time I’ll be upgrading lights and suspension.
Did you have a gap in the lense just installed them on my truck and the quality is terrible
I did not. Did you get real ANZO ones?
Where is the gap
Where did you get that adapter boot that you connected the tail lights to?
Did U Have Any Issues With Water 💧 Condensation
Nope. Never did.
Put your twist lock the old bulbs were in back in the housing
Would last one winter here in Canada. The bulb plugins are open to the elements. You would be better off to cut and heatshrink the wires together.
Very true. I now have water in my tail lights because you failed to mention that the bulb sockets twist in to the housing of the lights... Super cool. Not.
Craig Campbell it's not his fault you didn't know what you're doing
Craig Campbell Wasn't even Trey's fault...It's yours for not reading the provided directions thoroughly and now you have messed up tailights. Shouldn't even need directions if you know what you're doing but apparently you didn't lmao.
Craig Campbell I hope you’re joking. If you don’t know to twist the bulbs back in their socket, you didn’t pay attention to how you disconnected and probably shouldn’t be doing this yourself
@@1tocpc hahahah thats the funniest shit ive read inawhile. People really are stupid huh
I had led's from Recon and after 4 years they were so corroded that they quit working. I hope the Anzos are better. How is the visibility from the rear? I can tell the brake lights are visible but how about the tail lights of you don't brake?
where I can get this tail lights for my ford 2014?
amzn.to/2nOpYKT
I missed it! What happened to the 7.3?
Does anyone know what the tail lights look like while driving ?
Hey are these still working for you, lots of complaints out there about them dying out after a few months or from water damage
Be sure to twist the bulb sockets into the housing of the tail light rather than letting any and all rain/snow in.
Hows the waterproofing on these? Do i need to run a bead of silicone around them?
I never had any problems, but it wouldn't hurt.
@@TruckStuff1 hey thanks for the follow up. Im glad you havent had any problems over a year after having them. I think i will run a bead just in case.
Do they still work fine? Didn't have any condensation or water in them after a year? I'm looking forward to buy those.
I no longer have the truck, but after a year I had no problem.
Thkz for the video. Very well instructed. I want a set for my 09 f150...thkz again
You've had these a while now, what do you think?
I don't have the truck anymore, but they never gave me any problems
Have you had any issues with them filling up with water?
I don't have the truck anymore, but in the year or two that I had the headlights, no I had no issues
I was told to put a small bead of silicone before install to be safe.
They looked great! I'm looking into a set. Do you remember what size tires you had?
They were 33s. But I don't remember more than that
I like it brother, looks good as well good job.🇺🇸👍
Thanks man!
These are cool..may switch my aftermarket LEDs out for these
Are they still working? Any moisture/water in them?
Truck Stuff thanks. Having hell of time with LED tail lights keep getting moisture (blown LEDs) or resistor issues (rapid flashing).
Truck Stuff last set were VIPmoto. Looked great but filled with water in first month.
I can’t believe so many of these manufacturers stay in business with so many poor sealing issues. With halogen not such a big deal but moisture kills LEDs quickly! How hard is it to seal the damn things. I found another set I like the look of and waiting on seller to tell me if I can take apart of if he will ship to me with lens not attached. I will seal it myself with marine sealer and then feel confident good to go for many years. Wish me luck.
I have a 09 Ford platinum you think this will all fit for me like it fit for you
Yes
I'm dying to get these!
*edit: 6 days after commenting this, I got them! lol.
How have they held up?
Nice I'm planning on getting the same lights for my truck. It's good to see they don't hyper flash. Have you had any problems since this video
Nope. Been all good
Truck Stuff where or how I can get those lights ?
No condensation issues?
Update please?
As well do running bars with lights
Put led kits and foglight and as well led 3rd brake and license plate lights
Sounds awesome! I would like to see some pictures.
Can you tell me where to buy it?
@alfredo acuna carid.com
OMG, i was wondering till now if I was the only one with these tail lights.... :)
Glad to know i'm not. They are great, after 1 year still looking good. The driver side doesn't fit too well, but not bad
There will b 3 of us here soon lol I just bought a 13 Ecoboost and I’m getting then soon as I can
Those resistors will be bouncing around in there after a few years.
How are those Spyder headlights working for you? I have Spyder halo lights on my Ranger, but after about a year the protective coating is peeling off, making it look pretty bad up close. Have you experienced that on your headlights? Axial makes the same style light but are more expensive so I'm just trying to avoid having that same problem on the F150 I'm buying soon.
Plug and play?
Yep! Plug and play!
force scan??? just buy led equalizers at auto zone for your blinkers flashing too fast
LED equalizer? Umm Load Resistors......
@@TheDriver21122001 yes tool
Bruh u were supposed to put the plugs into it like they were on factory with the bulbs. It's a seal
How much did you pay for them? Just for comparison sake.....
They're around $198-210 on Ebay.
Good looking lights..
These look like they actually belong on the truck and were factory.
LOL dude a couple of glaring errors there ya numpty! First you need to clean off any areas you are using adhesive tapes, a good clean and then alcohol! Secondly the sockets that the bulbs used to fit in but now have the connectors need to be mounted to the new housing like they did to the old, you dont leave them dangling and have gaping holes water and dirt can get in!! Take your lights off and use the bayonet mount to clip the bulb holders where they go!!
look good
Very helpful thank you
Nice lights!
That is gonna suck when you replace the whole unit for a led failure.
Sweet truck
Good vid had to like it
And what you shoulda of done is show us the difference with the originals on (first, BEFORE YOU TOOK THE ORIGINALS OFF). Then show us your REPLACEments afterwards.
If you need to see the factory originals you could always look at your own truck.
there's only 3 LED's one at the point and one on each leg of the backwards "C" shape. send em back... ESPECIALLY FOR $350.00!
Thank you very much i like it 😍
Loooks 👍🏻
روعه
Listen I can tell you right now in a month or so you're going to be hearing some rattling going on in the back of your truck and those resistors are going to be bouncing around because you didn't bother to clean the surface that you're trying to stick them to just saying.
You're not the guy person to point that out. But these were on for a year with no problems. But you're right, I needed to clean it.
No limpio bien el área donde coloco la pieza.que mal
don't you think you should have clean that off with some alcohol before sticking those boxes in there LOL
Probably. But they've lasted years anyway.
You breathing killing me. Star make some exercise 🤣
Nothing like scratching the hell out of your nice new lenses. Not preping surfaces, for the ballasts. Glad your not a professional installer
He's not a professional, just modding his own truck in his driveway. Moron.
I jus don't like these, them plain leds that are on should be the stop lights, and them BUNCH of leds on should the tailights, I'm jus saying.🤢😳👎 No good.