@@erikmarshall6490 does yours have the optional projectors like the Limited and Platinum? Mine does. The right one looks dirty because I hit a deer 2 years ago and it cracked the rear of the housing, so water gets inside. Still works like new. The ones I’m putting in are the same style just a less costly aftermarket version.
How do these new ones compare to the 2013 ford projection beam bulb ,thats is what is on my truck now ,so I am curious about how the wiring is going to be if I want to change them out ,or even if I can because they are factory install.
Hi can you post the link for the reflector change to led morimoto turn signal light? Cant find it for some reason. That's the only thing im missing to finish my order
What is not shown is how to get the wire harness through the rubber grommet. I maybe missing something in the video, but it required my cutting the grommet to allow the wire harness black connector to pass through, then I could hook up the harness and push grommet and LED light back into the truck.
If these bulbs are for your Turn Signals, you will indeed need resistors (One resistor per bulb) when installing! We carry kits for each vehicle on our website, just enter your vehicle info and hit search! www.headlightrevolution.com/
I have a question please..i have peugeot 508 with 35 watt hid bulb..can i change these hid bulbs with 55 watt led bulbs without complications ?? Many thanks
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
Haha I love how you threw my truck in there for the “if you have halogen bulbs” at 1:50. Almost missed her.
😉
Only thing that I’d mention on headlights upgrade
These are all new for projector housings, none mentioned for Reflector housings.
The factory lightning on my 14 FX4 does not suck.
I’ve had it since new and am only now ‘upgrading’ because I want new headlight assemblies.
i also have a 14 FX4. the factory lighting is trash.
@@erikmarshall6490 does yours have the optional projectors like the Limited and Platinum? Mine does. The right one looks dirty because I hit a deer 2 years ago and it cracked the rear of the housing, so water gets inside. Still works like new.
The ones I’m putting in are the same style just a less costly aftermarket version.
My 2014 XTR is shitty all around. I had 2017 FX4 fully loaded few months ago but got totalled out by insurance and had to settle on one i have now. 😢
Now i wish i still had my 14 Raptor.
How do these new ones compare to the 2013 ford projection beam bulb ,thats is what is on my truck now ,so I am curious about how the wiring is going to be if I want to change them out ,or even if I can because they are factory install.
Hi can you post the link for the reflector change to led morimoto turn signal light?
Cant find it for some reason.
That's the only thing im missing to finish my order
What is not shown is how to get the wire harness through the rubber grommet. I maybe missing something in the video, but it required my cutting the grommet to allow the wire harness black connector to pass through, then I could hook up the harness and push grommet and LED light back into the truck.
Good info!
So, if any of the factory 'ambient' lights fail, what kind are they? In the event that this occurs, asking for a '14 Platinum.
Hello I want to upgrade to 3157: GTR I-LED ULTRA bulbs for my 2013 Ford F-150
Do I need to order the anti-hyper flash adapter?
If these bulbs are for your Turn Signals, you will indeed need resistors (One resistor per bulb) when installing!
We carry kits for each vehicle on our website, just enter your vehicle info and hit search!
www.headlightrevolution.com/
Whats the link to the Mirror turn signal lights?
www.headlightrevolution.com/Ford-F150-09-14-XB-LED-Side-Mirror-Lights
Hello, does anyone know if you need a special tool to remove the black clip from a H4 HID High Beam wire, thank you.
You do not.
@@HeadlightRevolution Thank you, I tried to pry them off with two small screw drivers and it will not disconnect.
I have a question please..i have peugeot 508 with 35 watt hid bulb..can i change these hid bulbs with 55 watt led bulbs without complications ?? Many thanks
You would have to change the ballasts, not the bulbs. But this would slowly burn the projector bowls resulting in less light output.
Thank you so much
Will these fit on a 2012 Ford Expedition?
Not sure!
No thanks. I'll just pop the mirror out(like Morimoto shows) and use the connectors instead of cutting wires
Tailgate doesn't have the "tail gate assist"? What kind of $100k+ truck doesn't have tail gate assist? POS Ford lol.
This isn’t no 100k+ truck 🤣 it’s $40k at most
What kind of headlights are on the truck,?
GTR Lighting Carbide headlights! www.headlightrevolution.com/Ford-F-150-09-14-GTR-Carbide-LED-Headlights-Headlight-Revolution?quantity=1