Orange Footswitch Demo (FS - 1)
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2017
- A Comprehensive demo of the FS - 1 Footswitch
Gear Used:
Amp - www.amazon.com/Orange-Crush-3...
Guitar - www.amazon.com/Fender-Standar...
Mic - www.amazon.com/MXL-770-Cardio...
Footswitch - www.amazon.com/s/ref=nb_sb_no...
I know it's not a big deal, but it does irritate me that clean is light on and dirty is light off
It can use any TS (standard guitar type) cable. Don't get this if you don't have a clean / dirty channel option on your amp head. That's what it's for.
Will this work on cr120 instead of the pedal with the Reverb switch on it
I'm not sure about that one
I thought you would go through plugging it in. Im having problems with foot switch.
It works on a crush 20 amp right? It has a footswitch input
Yeah you'll be good to go!
Does it work if I have a distortion pedal plugged in? I don't know if this is a stupid question, I've never used pedals before
I don't have a footswitch, but i can tell you that yes, it would work, because the amp has 2 channels (clean and dirty) and both of them work with the pedals you have connected
@@bryant_lenny8238 thanks!
It works but I don't know if you need it since you already have a distortion pedal
How do you make it clean to distortion?
The amp has two separate channels which the pedal switches between.
Turn down - guitar Tone -Vol knobs - Amp -Gain cleans up perfectly !
Bought the FS 2 for a Cr 60 and it’s annoying that dirty channel is always lit when activated light goes off. Meanwhile reverb channel works normally.
Will that work on cr120 2x12 combo amp???
I believe if there is a footswitch input then it should would
It has a footswitch input
The footswitch is pretty loud isn’t it
Hi can function on boss katana amp or any brand amp?.
probably not
will it work with a cr 120? assume so but double checking before i buy
yes i believe so with the foot switch input on the back
I have it, it works. But you get the light only on clean channel, when you switch to dirty, the light goes off. Don't know why..
@@Stanslick yeah have that same problem. thinking it is based on what setting the amp was on the first time the pedal gets plugged in
I have a cr120 and I can't seem to get it to work... I have plugged in the back in footswitch that is NOT labeled reverb. What am I doing wrong?
@@kyleyork6041 i woah i knew! doesn’t make sense lol
I wish so bad that the lights were right. My channel is backwards and my reverb is fine.
does it work with crush rt20?
Yes! You would plug this foot switch into the specified input on the back of the amp. There will be a little picture of a foot, that's the input you use.
Quick question, sorry if it's dumb, does the pedal use a TRS cable or does it use an instrument cable?
The footswitch uses an instrument cable
Hello,
got my FS-1 yesterday for my Crush.
I want CLEAN without LED and DIRTY with LED on ... this does not work? 🤔
Is this possible?
Or I am to stupid ... 😆
Regards from Austria
Jürgen
Honestly have no clue as for me I've tried to fix the same problem. I think it is based on what setting the amp was on when you first plugged it in but I may be wrong.
@@jeremymitaux OK ... thank you ... no big problem. ☺
My led Don't light
@@adrianodaniel8177 I would contact Orange or the retail of which you bought the pedal from.
Old comment but in case anyone comes here looking for help, yes this is possible. You need to start out on the clean channel and then switch the channel switch on the amp to dirty. This will activate the footswitch and have the LED turn on when you use the footswitch to switch to the dirty channel.
I mele all my own footswitches for less than ten bucks . They do the exact same thing, look clean and theres no sound dofference. Takes less then 30 min unles youre trying to mdke it look super fancy
What kind of cable does this use
Quarter inch
@@jeremymitaux so I can use the same cable as a guitar? I didn't know if it was a standard line cable or speaker cable due to the LED indicator
@@brandonharris9160 I use a guitar cable and NEVER had a problem! All should be well my dude
0:58 Lithiun ♥️
hahah
0:29 Whatever by Oasis? 🥰
is that just a regular instrument cable?
Exactly, there's a foot switch input on the back of the amp that's labeled as well to connect the pedal.
@@jeremymitaux I have a vr120h. There is also an input for a reverb footswitch. I'm assuming that would mean I need a fual fs1?
@@jeremymitaux I meant two fs 1
@@anthonyderosa7730 exactly
NIRVANA!!!!!!!!
IKR SO COOL
fr
why is inverse?
I just bought the FS-2 and this totally threw me off. Light goes on, you expect it to play the dirty channel. I blame it on british wiring. :-)
yeah that problem really sucks, don't know how to fix it
it does not work with a dual terror
Pretty sure that's working backwards
Too much noise