3rd Gen 4Runner: Tundra Brake Upgrade and Lower Ball Joint replacement
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- In this video, I demonstrate the steps I went through to do the Tundra Brake Upgrade (TBU) and install new Lower Ball Joints (LBJ)
Begin Disclaimer
This video is for demonstration purposes only. It is me demonstrating how I performed this modification. I make no warranties, nor do I take any responsibility for damage to your vehicle. Always seek advise or assistance from a trained professional.
End Disclaimer
Parts List:
Lower Ball Joints:
Genuine Toyota (43340-39465) Ball Joint Assembly - www.amazon.com/dp/B00KTJLSQW?...
Genuine Toyota (43330-39585) Ball Joint Assembly - www.amazon.com/dp/B00KTJLAZ6?...
Tundra Brake Upgrade:
Callahan CCK11987 [2] FRONT Performance Grade Red Powder Coated Caliper Assembly Pair Set - www.amazon.com/dp/B01EDCBKE0?...
Genuine Toyota Parts - Disc, Fr (43512-0C011) - www.amazon.com/dp/B00KTIFD5U?...
Genuine Toyota 04465-35290 Front Brake Pad Set - www.amazon.com/dp/B004SL4XAU?...
Genuine Toyota (04945-35120) Disc Brake Shim Kit - www.amazon.com/dp/B00KTIBFQG?...
4Runner Stainless Brake Lines for Tundra Brake Upgrade - adventuretaco.com/product/4ru...
*Information on "bedding" the brakes:
brakeperformance.com/bedding-...
0:00 Introduction
01:42 Front disc brake removal
05:05 Lower ball joint replacement
11:02 Tundra bake upgrade installation
19:34 Conclusion/wrap-up - ยานยนต์และพาหนะ
Man said “its time to give her some love” lmao with sparkling 98 behind him on nice sets of shoes and some nice custom everything
Outstanding video, I really appreciate how clear and concise your instructions were, and how you spoke slowly enough. Some people don’t realize that it’s much easier to absorb instructions when they are spoken clearly and slowly, especially if it’s something that you haven’t done before! 😂 Great camera work too, everything was very easily seen. Hopefully I’ll be able to save up enough for this conversion, thank you! 🙏💪🙌
Certainly does not appear that you have neglected her. One of the best looking 4RUNNERS I’ve seen!
I know, the work is never done
Thank you for the great comment!
Beautiful truck! 3rd and 5th gen are said to be the best generations. I love the 3rd gen. I have 99 4WD limited w/ E locker. Bought the truck with the Caliper upgrade. It’s squeaking and a little spongy, not sure if that’s normal. Going to rebuild the calipers, or I may just have my mechanic do it. Yours is super clean. Ok thanks for the vid
Very nice install video. This is on my project list.
I wish my 97 limited looked like that, very nice 4runner and thank you for making this video.
Thank You for a straight to the point DIY Video 👍💯👍💯. I too have done the tundra upgrade LBJ (oem) using drilled & slotted rotors. No better satisfaction than doing these upgrade myself 💪👍Yazmin..Venice Beach CA ⛱️ Keep Up The Great Work
nice. I did the powerstop tundra kit on my 1st gen Tacoma and it was a huge improvement.
Insanely Clean. Well done sir. Wow.
Great DIY!,In fact I almost bought 2001 3rd gen 4Runner but my wife don’t like the riding comport end up buying 1st gen Toyota Highlander. Now I got the 2021 5th gen T4R ORP love it . Just installed Dr.KDSS pan hard bar alignment kit ,you’re video helped me a lot doing DIY ( save money for having mechanic installed it)..
Liked and subscribed! Thank you for including the torque specs ad well.
The M Clips that return the brake pads away from rotor after brake release. Your suppose to have 2 m Clips for each caliper
With the tundra brake upgrade do the 16 inch wheels still fit or do you have to go to 17 inch wheels ?
VR is Vehicle Right just different terminology vs FR Front right
What wheels are those ?? They look so good on this set up !!
We're did you get them cv axles from with the red and black boots been looking for upgraded cv axles for my 97 LTD 4x4 and Both my 00 LTD 4x4 4runners
CVJ Axles: re manufactured Toyota OEM axles with improved boots: www.cvjreman.com/product/9168-r/
@@theoverlanded appreciate the info helpsna ton
Hi Ed, thanks for the video. Are the Rotors a set of 2? The Amazon link does not say if its a pair or single rotor.
why are you torquing the calipers down when you dot have pads or brake lines connected? You're doing the work twice
What coilovers are you using on the front noticed you got red Springs and there adjustable?
They are ToyTec. Yes, they are adjustable.
@@theoverlanded aww okay thought the looked familiar
Beautiful 4Runner! What roof rack is that? Is it mounted on something other than the factory rack?
It’s from a company called WMI that went out of business awhile ago. It mounts to the factory rack mounts. Thanks for watching!
Where did you get the stainless steel brake lines? I will be dping this upgrade to my 2002 SR5 2wd. Love the idea of stainless steel brake lines.
4Runner Stainless Brake Lines for Tundra Brake Upgrade - adventuretaco.com/product/4runner-stainless-steel-brake-lines-for-tundra-brake-upgrade/
Are those rotors thicker or is it the 307mm vs 277mm ?
What year/make/model did you use for the steel brake tubes from the caliper to the brake hose/line bracket ? I’m doing the tundra brake upgrade on my 1999 Runner using the 13WL caliper and my stock brake tubes from the caliper are too long and extend beyond the hose caliper on the knuckle neck by abut 1/2” or less, even with slight bending/manipulation I can’t line up the flange on the tube to the hose…. Thx !!
Huh. I went with the OEM hard lines from Toyota for my 98 and the worked just fine. The only reason I replaced them was because the twisted on me when I took them off the old calipers.
@@theoverlanded ok kool, yeah, I’m not sure why my originals didn’t work with the new calipers…. Still workin on it though!! Thanks for the reply! Nice rig too btw!!
Will this same work for 2014 camry Se sports? It has 18inch wheels-225/45/18. I saw some videos which can fit highlander brakes to camry but highland calipers are dual piston and tundra was 4 piston
Sorry. No idea.
Are those Calipers for 17" Wheels? Do they fit on 16" wheels?
My wheels are 17”. You’ll have to do the research for your specific wheels.
hello! what brand is that hitch tire carrier?
The tire carrier is Detours of Maine. Not sure if they are still in business though…
@@theoverlanded appreciate the reply!! great looking truck!