Great video I have a 22 Iconic Slive Gen 3 I did the 3 amber light in the grill to be on with the daytime running lights, number read out under the gauges, double honk disable and added the HVAC with the digital readout buy swapping out my HVAC control head and flashing my as built into the new unit also added the ambient lighting cup holder and media area light and glove box light. Forescan is a great tool.
Thanks for uploading this, very helpful, about to program a new key for buddies Fusion he just bought, only has one key and that damn mykey crap was on so he's only been able to drive up to 80mph for the last xouple months and the music volume wont go up past a certain level. Hope it works and thanks so much for doing a very simple to understand look at Forscan, really helped mw understand how easy it is!!
I don’t know if anyone mentioned this already, but you don’t need forscan for a 2021 raptor to disable the double-honk with keys inside, you can disable that in settings.
The 2 lights facing away from each other are your park lights. The amber and red lights on the side of the vehicle, front and back respectively. They come on automatically when your headlights are on, and you will see them lit up on the info cluster
at first global windows didn’t work for me but i just enabled every box for open/ close in the body control module and then separately went into the ddm and pdm and also enabled both open/ close on there and then it finally worked
Thank you for the information and very nice video. could you make a video or tell me how you changed the settings you mentioned you did in your truck? Like blind spot audible shirp, rear fog lights, turn signal flashes, power plug on. What are they actually called or located please! Thank you!
I was mistaken on this statement. If you’re talking about the little bell, when a car is in your Blindspot, that was a different sound, and I thought it was a setting that I had turned on. Sorry about that.
@@bobbygflwith my 2017 Taurus I had to enable it in the dash, it has a windows menu. My car does that from the factory, but only down and vents the sunroof.
I’ve gone through the dash settings and could not find any options to turn on. Thanks for the help. At some point I’ll hook the forscan back up and poke around again.
@@bobbygfl Just off the top of my head if you go into the non asbuild section of the body control module, driver door module, and passenger door module there are all options for global open and close, turn those all on in each of those modules then afterwards with your vehicle turned off and from the outside of the vehicle double press the unlock button and hold it down on the second press until you start to see the windows move. You can either let it go down all the way or you can press unlock again to stop it going partially down. To close the windows do the same thing but with the lock button. So you press once and then press twice but on the second press you’d hold it until the windows start to move then you can let go of the button and the same applies if you only partially wanted to close them as well.
Hi, I swapped my 23 F150 xl 8” screen to the 12” screen with the 12” apim module as well. Screen won’t turn on. Any clue on how to program it using forscan? I don’t see the apim module option. Also have no clue on the coding…
yes, please do a video on the Blind spot warning, “chime”. And if you help with your G- windows, I have issues with them but I got working, now I try to figure out how to get the rear window to open and close.
Yes for the Speedo. Not sure on the plugs. Probably yes because you can set the 110 to be on when the ignition is off. Before you ask, I don’t know where that setting is. I did see it though
Just bout a new 2023 f150 lariat with pretty much all the options, my question is what did you do to have the color app page on your screen. That's way cooler than mine and would love to have that. And the video was very educational thanks
Your video is great and very informative. I have a 2003 Lincoln Navigator and a 2011 Ford Taurus SEL. My interest is mostly for diagnostics, such as misfires, etc.. The Navigator is now 20 years old. With that in mind, will ForScan take care of diagnostics for both vehicles? Thanks for the feedback.
Check the connections at the battery terminal. I’ve seen other videos that show a plug right at the battery that you disconnect that turns off cylinder deactivation and auto start/stop. I don’t have either of those on my truck so I cannot confirm.
Check the connections at the battery terminal. I’ve seen other videos that show a plug right at the battery that you disconnect that turns off cylinder deactivation and auto start/stop. I don’t have either of those on my truck so I cannot confirm.
Hello. Does FORScan work on 2023 f150s I’m trying to make it so that all the exterior lights don’t go on while the truck is off and I open the doors . Kinda of annoying while camping. Thanks if anyone had a simple solution 2023 f150 Platinum.
Thanks just tried it. I had luck changing the silent (dark) mode to enabled and it worked lights don’t come one during opening doors or closing perfect for camping. Only side effect is no horn sound on locking the the truck.
I assume you've found out by now that the switch you thought was for rear fog lights is instead for parking lights. I don't see a rear fog light switch among your light controls. If there was one, it would be labeled with a right facing headlight symbol with "beams" shooting out of it to the right. Light patterns emitted by rear fog lights are very different from those emitted by brake lights. Rear fog lights emit focused beams of light. If your Raptor has the LED-Matrix headlights, another video currently on TH-cam video shows how to use Forscan to enable their adaptive function so that the high beams can be on most of the time at highway speeds while shielding occupants of oncoming and preceding vehicles from glare and discomfort. Instead of automatically dimming the entire high beams when the light system is in automatic mode (light switch labeled with "A"), this coding change causes segments of the LED matrix array to be dynamically turned off and on as other vehicles are tracked as they move and are shielded from glare. I have this feature enabled on a Porsche with LED-matrix headlights.
Call me old school but I cannot understand why anyone would want to modify or even take a chance messing with these systems as much as these newer trucks cost. Each their own I guess 🤷🏻♂️
I felt the same way but it’s like adding an app to your phone and completely reversible back to factory with one click. And the convenience of the personalized changes are really improve the enjoyment of the truck.
@@bobbygfl I get that but if you’re deviating from original factory settings, how do you know the long term effects on various components it could cause? Is it worth the risk?
So are you saying that we dont have to change those 3 sets of 4 digits with 2023? I have a 23 f150. I am trying to figure out which ones I need to learn as there are bunch videos where you have change digits. Also where do I find the new codes to change? Please advise... Thanks for your video.
Google searches seem to be the best way to find latest settings and yes, in 2023 forscan made changes to make it easier. I never used it before the latest version, but this what I learned researching.
@@bobbygfl Thanks. looks like some setting are still codes in 23. I am having hard time finding codes from google. Living it up says to change first 2 in 2nd col. Mine are 0C. Dont know how would I even change them...
@@bobbygfl while i am lookin for 23 codes I found this latest but no help. How do you change value of hexadecimal by 4? 724-01-01 xxxx**xx--LaneChange_Cancel_Blink_Num (LCCBN) Note: increasing your default value by 4 hex each time will increase # of blinks
Have used Forscan on several of my trucks now. I wouldn't say its "fool proof", but it IS rather easy to use.
Thanks!
Try rolling down the window with my on, switch off key shut door and then try lock and 2nd press key to roll up. I fluked this sequence and it worked.
I’ll try it!
Great video I have a 22 Iconic Slive Gen 3 I did the 3 amber light in the grill to be on with the daytime running lights, number read out under the gauges, double honk disable and added the HVAC with the digital readout buy swapping out my HVAC control head and flashing my as built into the new unit also added the ambient lighting cup holder and media area light and glove box light. Forescan is a great tool.
Nice! I need to hook up again and make some changes!
Thank you for the great video! Just did several changes to my new super duty today.
Glad it helped!
I initially thought you said Foreskin LOL, Im on the floor laughing sir... excellent video for diagnostics, thank you
Lol. My wife keeps saying the sane thing
Thanks for uploading this, very helpful, about to program a new key for buddies Fusion he just bought, only has one key and that damn mykey crap was on so he's only been able to drive up to 80mph for the last xouple months and the music volume wont go up past a certain level.
Hope it works and thanks so much for doing a very simple to understand look at Forscan, really helped mw understand how easy it is!!
Thank you! Good luck hope for no hang up’s
this is the video ive been looking for, very informative and very good , thanks a ton
Thank you!
I don’t know if anyone mentioned this already, but you don’t need forscan for a 2021 raptor to disable the double-honk with keys inside, you can disable that in settings.
Nice. Good to know. Thanks for the comment.
Where? I dont see it
No idea
The 2 lights facing away from each other are your park lights. The amber and red lights on the side of the vehicle, front and back respectively. They come on automatically when your headlights are on, and you will see them lit up on the info cluster
Ahh. Thanks!
at first global windows didn’t work for me but i just enabled every box for open/ close in the body control module and then separately went into the ddm and pdm and also enabled both open/ close on there and then it finally worked
Oh nice! I’ll try this. Thank you!
id love if they intergrated a easy to understand trouble shooting codes for your check engine light
That would be great!
Great video. Much appreciated!
Glad it was helpful!
Thank you for the information and very nice video. could you make a video or tell me how you changed the settings you mentioned you did in your truck? Like blind spot audible shirp, rear fog lights, turn signal flashes, power plug on. What are they actually called or located please!
Thank you!
Yes I will
how did you turn on the sounder when you put the signal light on?
I was mistaken on this statement. If you’re talking about the little bell, when a car is in your Blindspot, that was a different sound, and I thought it was a setting that I had turned on. Sorry about that.
Just tried disabling the auto start/stop on my buddy’s 24 f150 and it doesn’t work. Bambi mode and a couple other changes did however
I read you’ll need to buy the devise that plugs in between the switch and the switch wire harness that tricks the truck into thinking is on.
I know it’s a little late, but if you didn’t figure it out, the global open and close windows only works when the vehicle is turned off
This is if it is all programmed properly, I know there are several modules you have to program on the newer f150s to get it to work
Never figured it out.
@@bobbygflwith my 2017 Taurus I had to enable it in the dash, it has a windows menu. My car does that from the factory, but only down and vents the sunroof.
I’ve gone through the dash settings and could not find any options to turn on. Thanks for the help. At some point I’ll hook the forscan back up and poke around again.
@@bobbygfl Just off the top of my head if you go into the non asbuild section of the body control module, driver door module, and passenger door module there are all options for global open and close, turn those all on in each of those modules then afterwards with your vehicle turned off and from the outside of the vehicle double press the unlock button and hold it down on the second press until you start to see the windows move. You can either let it go down all the way or you can press unlock again to stop it going partially down. To close the windows do the same thing but with the lock button. So you press once and then press twice but on the second press you’d hold it until the windows start to move then you can let go of the button and the same applies if you only partially wanted to close them as well.
Hi, I swapped my 23
F150 xl 8” screen to the 12” screen with the 12” apim module as well. Screen won’t turn on. Any clue on how to program it using forscan? I don’t see the apim module option. Also have no clue on the coding…
I’m sorry. No idea
Can you tell me how I can change my temp gauges like trans & coolant to show the actual temperature.
This is all I can find. th-cam.com/video/qQpZJa_dciY/w-d-xo.htmlsi=oO2JY0u1gYaMgntd
For global open, do your window switches click and auto up and down for Windows even when you get go? That's usually the requirement
They go all the way down or all the way up on one short click for that direction.
What module is the Audio Chirp on for the BLind Spot Warning???
I’d need to look again. I think I’ll do a video just screen recording all the options.
@@bobbygfl Awesome ..please do and thanks
yes, please do a video on the Blind spot warning, “chime”. And if you help with your G- windows, I have issues with them but I got working, now I try to figure out how to get the rear window to open and close.
Did we figure this out yet
Did anyone ever figure out which block and digit to change for the blind spot chirp?
Did you find out how to configure the global windows? I have a 2023 F150 and don't know how to do it.
Nope, never figured it out.
Can you make all the 12 volt plugs keep power full time instead of timing out? Also adjust speedometer for 37s?
Yes for the Speedo. Not sure on the plugs. Probably yes because you can set the 110 to be on when the ignition is off. Before you ask, I don’t know where that setting is. I did see it though
Thanks!
Hi Bobby, I bought a Ford Raptor 2018 but had to replace its front radar. However, I believe it must be programmed please help.
I don’t believe forscan can do this and you’ll need to have your dealer flash the cpu. That’s my experience with other brands anyway. Good luck!
Just bout a new 2023 f150 lariat with pretty much all the options, my question is what did you do to have the color app page on your screen. That's way cooler than mine and would love to have that. And the video was very educational thanks
I believe that was factory. I didn’t do anything to change it.
It’s Apple CarPlay. Just connect your iPhone.
I juat want to add the hard wired keyless entry keypad to my 23 XL.
Cool
You have to click unlock 3 times and hold
Thanks!
Your video is great and very informative. I have a 2003 Lincoln Navigator and a 2011 Ford Taurus SEL. My interest is mostly for diagnostics, such as misfires, etc..
The Navigator is now 20 years old. With that in mind, will ForScan take care of diagnostics for both vehicles?
Thanks for the feedback.
Seems like there would be some options.
Thank you for posting this!
My pleasure!
Do you know if you can enable the glare free higb beams or add the heated steering wheel using the new "easy" way?
Yes, I do recall seeing glare free in the easy screen. I don’t recall seeing any option for heated steering.
Do i need the that scanner or can use my snap on or autel pass thu devices
This one is recommended.
Can cylinder deactivation and auto start/stop be disabled?
No, not that I saw
Check the connections at the battery terminal. I’ve seen other videos that show a plug right at the battery that you disconnect that turns off cylinder deactivation and auto start/stop. I don’t have either of those on my truck so I cannot confirm.
How did you turn on that warning alert at time 17:00 for the blindspot?
It didn’t stay on. I’ve tried to turn it back on but can’t figure out how
What setting disabled the door open chime and the start up chime?
I’ll need to do a video showing every line of each menu option.
You dont ever put an asterix. Thats why you messed it up. Number or letter only.
Thanks!
Does using this void warranty?
No
Has anyone figured out how to deactivate that cylinder deactivation on the 5.0L with Forscan yet?
Hope you get an answer!
That's not a forscan mod yet. However most f150 5.0 engine tunes will remove that
Check the connections at the battery terminal. I’ve seen other videos that show a plug right at the battery that you disconnect that turns off cylinder deactivation and auto start/stop. I don’t have either of those on my truck so I cannot confirm.
Hello. Does FORScan work on 2023 f150s I’m trying to make it so that all the exterior lights don’t go on while the truck is off and I open the doors . Kinda of annoying while camping. Thanks if anyone had a simple solution 2023 f150 Platinum.
Yes, it does work on 2023. My guess is it would be in the 360 lighting choices.
Thanks just tried it. I had luck changing the silent (dark) mode to enabled and it worked lights don’t come one during opening doors or closing perfect for camping. Only side effect is no horn sound on locking the the truck.
Hi, i bought f150 raptor 2023, im from Europę, may i use forscan for change Telematics us for Europę, now i cant use FordPass
I wonder why. That’s interesting.
What’s the software? And don’t you need license from ford?
It’s in the description. Forscan.org and no nothing from fire is necessary.
😊is forscan can do bidirectional
? What
SO THIS IS NOT THE AUTHORIZED FORD ISD???OR SECOND HAND..TNX
What is isd?
Your e mail not working.
Thanks
@@bobbygfl So how to DM you if we want to send car diagnostic tool to you.
Ohh. My email is bobbygfl@gmail.com
I assume you've found out by now that the switch you thought was for rear fog lights is instead for parking lights. I don't see a rear fog light switch among your light controls. If there was one, it would be labeled with a right facing headlight symbol with "beams" shooting out of it to the right. Light patterns emitted by rear fog lights are very different from those emitted by brake lights. Rear fog lights emit focused beams of light. If your Raptor has the LED-Matrix headlights, another video currently on TH-cam video shows how to use Forscan to enable their adaptive function so that the high beams can be on most of the time at highway speeds while shielding occupants of oncoming and preceding vehicles from glare and discomfort. Instead of automatically dimming the entire high beams when the light system is in automatic mode (light switch labeled with "A"), this coding change causes segments of the LED matrix array to be dynamically turned off and on as other vehicles are tracked as they move and are shielded from glare. I have this feature enabled on a Porsche with LED-matrix headlights.
That’s super interesting. I have a mac and need to use my wife’s laptop to hook up. So it’s a process lol. Next time I do I’ll check this out
Ooo, the no horn beep is money....I cringe Everytime
Me too!!
Foreskin 2023 Bob, do you spell your name backwards?
Thanks
No more Porsche videos?
Still have it. Have new black lights to install. Just busy. When I do I’ll make a video for sure.
Call me old school but I cannot understand why anyone would want to modify or even take a chance messing with these systems as much as these newer trucks cost. Each their own I guess 🤷🏻♂️
I felt the same way but it’s like adding an app to your phone and completely reversible back to factory with one click. And the convenience of the personalized changes are really improve the enjoyment of the truck.
@@bobbygfl I get that but if you’re deviating from original factory settings, how do you know the long term effects on various components it could cause? Is it worth the risk?
The start stop feature ruined my previous bass amp and it’s about to ruin my new amp if I don’t disable it.
If you work in tech, this is absolutely NOTHING
So are you saying that we dont have to change those 3 sets of 4 digits with 2023? I have a 23 f150. I am trying to figure out which ones I need to learn as there are bunch videos where you have change digits. Also where do I find the new codes to change?
Please advise... Thanks for your video.
Google searches seem to be the best way to find latest settings and yes, in 2023 forscan made changes to make it easier. I never used it before the latest version, but this what I learned researching.
@@bobbygfl Thanks. looks like some setting are still codes in 23. I am having hard time finding codes from google. Living it up says to change first 2 in 2nd col. Mine are 0C. Dont know how would I even change them...
@@bobbygfl while i am lookin for 23 codes I found this latest but no help. How do you change value of hexadecimal by 4?
724-01-01
xxxx**xx--LaneChange_Cancel_Blink_Num (LCCBN) Note: increasing your default value by 4 hex each time will increase # of blinks