Im still wondering where the hell my gf3 ak-p got lost in the warranty department. Been 2 months and excuse now is yall have to get a barrel for it? Yall build these guns, shouldnt take 2 months to get one of your barrels and put it on. Its BS
@@alternate3307 I sent a PSA AR15 upper to them twice. I tested the alignment of the gas tube on it by sliding a bolt carrier (without a bolt) in an out of the upper receiver. With the bolt carrier pushed all the way forward, the gas tube was so far out of alignment and creating so much friction with the gas key that I could not pull it back out with my hand. I had to use tools. I explained that to PSA and they said that was normal and within spec. They sent it back the first time without doing anything to it. The second time they replaced the bolt carrier group and charging handle. There was nothing wrong with those two parts. They might have a lifetime warranty, but what value does that warranty have if they don't actually fix an issue?
i place and order 11/30/2019 send my copy of my foid card and state id and i havent hear from palmetto state armory try to call no answer try to email no response and my order still processing can someone please help me where do i need to go to get some answers ?
@Palmetto State Armory have you guys ever reached out to Cav Trooper 19D here on youtube? Hes a current US Army Cavalry officer. He does a lot of great videos especially on the AK. He champions PSA quite a bit. May be in both of your guys interest. If u haven’t heard of him yet u will. Hes a stand up guy n channel is picking up steam bcuz of it
Ditto. I think they started with the mp5 clone, realized it would be pricey and then went with this instead. I like the ak-v alnost as much as my cz evo. Its bad-ass.
It's *COLD* here today! I've been snuggled-up in front of the fireplace with some of my PSA hardware all day. One of those AK-V's needs a home here, too.
I recently bought one of AK GF3 rifles and have been thoroughly impressed with about 2000 rounds through it so far. Lately I've been been looking at CZ Scorpion but I think I'm going to go with the AK-V for my next 9mm pistol-ish carbine, your quality value and good customer service made the decision alot easier 😃👍
Has anyone at PSA tested to see if Franklin Armory's AK9-C1 binary trigger is compatible with the AKV-9? Could not get a straight answer from Franklin Armory, and this would LITERALLY make the AKV TWICE as fun.
@snoopy dubnation 5.45 ammo is no longer cheap/ readily avaible and 5.45 performs similar to 5.56. AKs chambered in 5.56 are already hard to sell because ARs are so cheap to buy now. I would love to have an AK in 556 but its not gonna happen due to cost, $800.00 AK or $400 AR that shoots the same ammo?
I wish PSA did a build your own type of thing where you could pick and choose what handguards, grips, brace, triggers etc. I would love the MOE plum version but with a black triangle brace instead of a plum brace.
You guys are awesome. I have owned many psa guns. All great quality for the money. I mean, during your sales, you can buy a really sweet ar15 pistol for less than 500 bucks. Your ammo and magazine deals are great. I just got 10 pmags shipped to my door for 84 dollars including tax. Saving up now for a AKV.
LOL.. not a MP5 question.... I really enjoy my AKV at the range.. LOTS of fun. Mine does not cycle Hollow points reliably. FMJ in brass or steel case it does great. Is this normal? BTW.. I REALLY enjoy the AKV and the reasonably priced magazines.
Does anyone else's AKV bump fire sometimes if you don't pull the trigger all the way to the back? This is my favorite at the range, I just get looks when it rips 3-5 rounds.
That left side receiver bolt release was one of the selling points for me, but I need a hammer to pound on it just to release the thing, it is so stiff..Impossible to work with.The irons are also way off from the factory. Everything is super tight. It has a quality feel to it, overall, but mine definitely has some weird quirks, and I will have to keep messing with it before I completely trust it.
This rifle is quickly becoming my favorite gun. It shoots so flat so quick I can hit what ever is in front of me and i mean fast. I have some videos on my channel if you wanna see them . Whoever made this gun did an incredible job. I love the folding triangle brace it fits in a sling back pack that is medium size. Just a wonderful gun highly recommended! Thanks Stomp Strong!
You should sell the od green,plum,fde,and grey stock sets on your akv9s on the psa site just in case someone wants to change theirs out to something different..
I also like the AK-V mags offered in different colors AND a clear polymer mag ! The steel reinforced feed lips are tits ! Why buy any other brand of Scorpion or AK-V type mags when one can get these exceptional 9mm mags from PSA ?
When are they back in stock. Saw y'all had some in OD green just last night and then this morning thier gone so when will they be back in stock in larger quantities????
Just picked up my railed AK-V and have shot it a couple of times at the range. I am happy with my purchase. Now one issue I am having is with opening the dust cover. I am getting a sore thumb after pushing the dust cover release on the spring assembly. Have any suggestions. My Romanian NAK 9 is easier to open. Thanks.
Major question I have is how could I mount a ZenitCo PT-3 stock on the AK-V? The AKV doesnt have a 5.5mm Rus or 4.5mm Arsenal hinge that allows the attachment of the PT-3 stock and I cannot find any custom adapters from any manufacturer that would allow me to use the stock that I really want.
I love this gun. I'm wondering if anyone else is having a problem with aluminum ammo. I had several jams when using aluminum, not a single problem with brass.
Hi, i was just wondering, in which way can we keep track of the PSAK-E, PSA5, PS9 Dagger, PSA JAKL updates? I had no idea of this products being created until i saw the videos from the SHOT Show, and would like to be well informed so I don't miss out on the purchases.
We have a carbine version that is in stock as often as we can make it. Click the NOTIFY ME icon on this link to get an email when more become available. palmettostatearmory.com/psa-ak-v-9mm-carbine-rifle-black.html
After shooting 500 rounds through my AKV, I noticed a lot of build up on the muzzle brake. After scraping it out I noticed lead and metal jacket pieces, so I assume I am getting muzzle brake strikes. I wanted to suppress this gun but I am worried about baffle strikes. I watched a video on this gun where they had baffle strikes due to the threading be off. What do I need to do going forward ?
Just got one and new to AK platform. My safety lever goes up past cover and it will fire. Thinking this is not normal. Is there an easy fix I can do or do I need to send it in to PSA to be fixed?
"And by the way, we did all that and kept the price point competitively lower than even the c-competitors"; freudian slip there in the stutter? after all, the name of your competitors also starts with a "K" sound... Either way, love it, the AKV seems to take the cake for AK Pistols.
I like the concept, I don't love that you made it with proprietary magazines. How about making a Tokarev version using PPS magazines? (for those of us who bought 10,000 rds of 762x25 when it was 5c/rd ) ?
If they ever did build one in 7.62 x 25, your ammo is probably corrosive, and you would need to send it to Rob Ski to throw in his swamp to properly clean it!
Just ran my first 100 rounds in my AKV. The dust cover has a good amount of aluminum eaten up off the shell deflector/ ejection port. Is it normal wear?
Been having a problem with the ak-v after shooting a mag, bolt holds open, put new mag in, send the bolt home, and doesn’t fire. Look in and the round looks like it didn’t go in the whole way. Is it a problem with the mags or spring not sure. Any ideas?
PSA has outdone themselves with the AK-V! Now the world needs a PSA AK-102 with PSA or Magpul steel reinforced Bulgarian style magazines!!! No magwell adapters allowed please :) A true purpose built American 5.56 AK is needed that doesn't cost everyone $2,000 to buy.
Learn more about the AK-V and see available options here: palmettostatearmory.com/ak-47/ak-v.html
Im still wondering where the hell my gf3 ak-p got lost in the warranty department. Been 2 months and excuse now is yall have to get a barrel for it? Yall build these guns, shouldnt take 2 months to get one of your barrels and put it on. Its BS
@@alternate3307 I sent a PSA AR15 upper to them twice. I tested the alignment of the gas tube on it by sliding a bolt carrier (without a bolt) in an out of the upper receiver. With the bolt carrier pushed all the way forward, the gas tube was so far out of alignment and creating so much friction with the gas key that I could not pull it back out with my hand. I had to use tools. I explained that to PSA and they said that was normal and within spec. They sent it back the first time without doing anything to it. The second time they replaced the bolt carrier group and charging handle. There was nothing wrong with those two parts. They might have a lifetime warranty, but what value does that warranty have if they don't actually fix an issue?
When can we get more info on the AK-556?
i place and order 11/30/2019 send my copy of my foid card and state id and i havent hear from palmetto state armory try to call no answer try to email no response and my order still processing can someone please help me where do i need to go to get some answers ?
@Palmetto State Armory have you guys ever reached out to Cav Trooper 19D here on youtube? Hes a current US Army Cavalry officer. He does a lot of great videos especially on the AK. He champions PSA quite a bit. May be in both of your guys interest. If u haven’t heard of him yet u will. Hes a stand up guy n channel is picking up steam bcuz of it
What about the PSA MP5?
That's all i care about.
Same
Ditto. I think they started with the mp5 clone, realized it would be pricey and then went with this instead. I like the ak-v alnost as much as my cz evo. Its bad-ass.
Still in the works. No official release date yet.
@@PalmettoStateArmoryVideos You have until Jan 1 to sell it to Virginians....
PSA MP5 update. _Please and Thank You._
Keep up the good work my friends.
Still in the works. No official release date yet.
Love PSA's product, service, pricing. Keep it up and you'll keep customers for life. AMERICA
Their whole philosophy of an AR in every home ( my words) makes me warm inside. ♥️🇺🇸👍
It's *COLD* here today! I've been snuggled-up in front of the fireplace with some of my PSA hardware all day. One of those AK-V's needs a home here, too.
The AK-V is my favorite 9mm by far.
Glad to hear that!
@@PalmettoStateArmoryVideos I have 40+ AK-V mags, can you please make a Mag Speed Loader or Mag*Pump so i can load my mags faster?
I got a question for you PSA, where's that MP5 clone you guys been workin on?
Still in the works. No official release date yet.
2020 THEY OUT NOW
Brian Beasley was lll
@@PalmettoStateArmoryVideos The riots will continue until we get what we want.
I recently bought one of AK GF3 rifles and have been thoroughly impressed with about 2000 rounds through it so far. Lately I've been been looking at CZ Scorpion but I think I'm going to go with the AK-V for my next 9mm pistol-ish carbine, your quality value and good customer service made the decision alot easier 😃👍
I'd like to see the AKV in 45 ACP,
My ak v is my favorite gun
It’s so awesome
I so badly want one of these. I’m starting my saving fund for it now. AKOU convinced me.
Rob Ski is the shit
Long time customer here ive built 11 psa guns and only one issue ever. Dissapator upper...keep it up PSA
WHEN ARE YOU GOING TO OFFER YOUR MP-5 CLONE!!!!!!!??????? I can't wait to buy one!!!
STILL IN THE WORKS. NO OFFICIAL RELEASE DATE YET.
Great video. Thank you PSA for all you guys do!
I'll have to get one,palmetto is awesome.
By far my favorite PCC.
Has anyone at PSA tested to see if Franklin Armory's AK9-C1 binary trigger is compatible with the AKV-9? Could not get a straight answer from Franklin Armory, and this would LITERALLY make the AKV TWICE as fun.
But what about the 545 and 556 aks real questions!
Not gonna happen, end of story.
@snoopy dubnation 5.45 ammo is no longer cheap/ readily avaible and 5.45 performs similar to 5.56. AKs chambered in 5.56 are already hard to sell because ARs are so cheap to buy now. I would love to have an AK in 556 but its not gonna happen due to cost, $800.00 AK or $400 AR that shoots the same ammo?
@@sugarland77478 Well, that's complete horse shit.
Both are still in the works. No release date set for either one at this time.
I wish PSA did a build your own type of thing where you could pick and choose what handguards, grips, brace, triggers etc. I would love the MOE plum version but with a black triangle brace instead of a plum brace.
Will PSA create an AKV variant and magazines in different calibers, such as 10mm or .45 ACP?
Yes 10mm would be awesome!
💛
@@RKPTMcCoyBros 10mm is a great pistol caliber. Ammo is kind of expensive. If you want more power than a 9mm AKV, why not just buy a 7.62 x39 AKP?
agreed make 10mm
You guys are awesome. I have owned many psa guns. All great quality for the money. I mean, during your sales, you can buy a really sweet ar15 pistol for less than 500 bucks. Your ammo and magazine deals are great. I just got 10 pmags shipped to my door for 84 dollars including tax.
Saving up now for a AKV.
When is the 10mm version coming out!? 😀
How did you fit so much awesome into one platform?
LOL.. not a MP5 question.... I really enjoy my AKV at the range.. LOTS of fun. Mine does not cycle Hollow points reliably. FMJ in brass or steel case it does great. Is this normal? BTW.. I REALLY enjoy the AKV and the reasonably priced magazines.
This gun is a goal for me next year along with another m&p (3.6 compact)
I bought the 2.0 compact 3.6" and it is incredible. Smokey mountain knife works has them for $375 or $380 no tax. You wont regret it
What's the life expectancy of the rubber buffer (in number of rounds) before replacement is required?
Does anyone else's AKV bump fire sometimes if you don't pull the trigger all the way to the back? This is my favorite at the range, I just get looks when it rips 3-5 rounds.
I just got the rifle version in nutmeg..I'm pretty excited..keep up the good work.
Hey Chris from PSA I've a question about the AK-V. When is that AK-74 going to be ready?
That left side receiver bolt release was one of the selling points for me, but I need a hammer to pound on it just to release the thing, it is so stiff..Impossible to work with.The irons are also way off from the factory. Everything is super tight. It has a quality feel to it, overall, but mine definitely has some weird quirks, and I will have to keep messing with it before I completely trust it.
Palmetto has been killing it in recent years.
This rifle is quickly becoming my favorite gun. It shoots so flat so quick I can hit what ever is in front of me and i mean fast. I have some videos on my channel if you wanna see them . Whoever made this gun did an incredible job. I love the folding triangle brace it fits in a sling back pack that is medium size. Just a wonderful gun highly recommended! Thanks Stomp Strong!
What sling is used with the AK-V triangle side-folder?
Do a q and a on the AKP. I love mine.
You should sell the od green,plum,fde,and grey stock sets on your akv9s on the psa site just in case someone wants to change theirs out to something different..
Can you do a video on removing the standard magpul furniture. Removed the upper but can get the lower handguard off.
Do a video of the AK-P
MP5 update!!!!!!!!!!
Still in the works. No official release date yet.
This would be awesome in .40sw. Please make it in this caliber for LEOs.
What kind of hollow points have been tested in the AKV and do any of them work without jamming
any plans to make a 16” barrel version so that it can be used in USPSA PCC division? braces still aren’t allowed
I love that you guys designed the magazines with steel reinforced feed lips. Any plans to make 10 or 20 round magazines ?
I also like the AK-V mags offered in different colors AND a clear polymer mag ! The steel reinforced feed lips are tits ! Why buy any other brand of Scorpion or AK-V type mags when one can get these exceptional 9mm mags from PSA ?
Great information! Thank you!
Thank you
I really love the PSA lineup !!
I plan on buying 3 of your guns in the coming year (please keep the prices low)
👍👍👍
Looks like a great Boogaloo gun for when the Poop-Flinging Gremlins come!
🤗♥️👍 it does, doesn't it. 😎
When are they back in stock. Saw y'all had some in OD green just last night and then this morning thier gone so when will they be back in stock in larger quantities????
Just picked up my railed AK-V and have shot it a couple of times at the range. I am happy with my purchase. Now one issue I am having is with opening the dust cover. I am getting a sore thumb after pushing the dust cover release on the spring assembly. Have any suggestions. My Romanian NAK 9 is easier to open. Thanks.
Rubber deteriorates from heat and time. Will the rubber bumper be sold by PSA ?
Love PSA
Can you guys make a flared magwell pleaseeeee. Like the TACCOM AKV MAGWELL. They don’t make them anymore since they are understaffed.
We need the PSA-5!
After seeing all the new products from you guys at SHOT Show 2020, I have one simple question. When can I move in? :D
Major question I have is how could I mount a ZenitCo PT-3 stock on the AK-V? The AKV doesnt have a 5.5mm Rus or 4.5mm Arsenal hinge that allows the attachment of the PT-3 stock and I cannot find any custom adapters from any manufacturer that would allow me to use the stock that I really want.
Will the AK-E include a combo front sight gas block, railed top cover, side folding rear trunnion/stock??
When will these be back in stock? I'm ready. 😉
Will be here Thursday. Thanks PSA, shipped way faster than I was expecting. Ordered April 1st, shipped April 7th. 👍🏻
I love this gun. I'm wondering if anyone else is having a problem with aluminum ammo. I had several jams when using aluminum, not a single problem with brass.
Does PSA sell the other styles of AK-V furniture so that we can customize our own AK-Vs?
Vince Flores The AK-V uses AKM parts, so you can slap whatever you want on it.
Excellent QA. I got a question a question. What is the barrel length?
10.5"
WHERES THE MP5????
Still in the works. No official release date yet.
Palmetto State Armory your words hurt
When will we see a 4.5mm folding option?
Thanks for confirming the magwell is aluminum!
Hi, i was just wondering, in which way can we keep track of the PSAK-E, PSA5, PS9 Dagger, PSA JAKL updates? I had no idea of this products being created until i saw the videos from the SHOT Show, and would like to be well informed so I don't miss out on the purchases.
Will an ak binary trigger work in the akv? Just bought an AKV off of your website today
Is this considered an SBR? Does it need a tax stamp?
Is there going to be a rifle model coming?
We have a carbine version that is in stock as often as we can make it. Click the NOTIFY ME icon on this link to get an email when more become available. palmettostatearmory.com/psa-ak-v-9mm-carbine-rifle-black.html
If I got a tax stamp for the pistol, could I slide a regular stock on the buffer tube and is it commercial or mil-spec? Thanks!
Will a Trijicon RMR in a low picatinny mount co-witness the iron sights on the AK-V to any usable degree?
Can we get a OA-93? PSA version. You guys still have the AR-9 right? Did you switch to the AKV-9
Man can’t wait for my Plum AKV to get here 🙏🏽
When will you have the psa medal handguard available? It's been out of stock for 2 months.
What would the effect be if you lightened the charging pull?
After shooting 500 rounds through my AKV, I noticed a lot of build up on the muzzle brake. After scraping it out I noticed lead and metal jacket pieces, so I assume I am getting muzzle brake strikes. I wanted to suppress this gun but I am worried about baffle strikes. I watched a video on this gun where they had baffle strikes due to the threading be off. What do I need to do going forward ?
PSA M249 Para SAW please and thank you.
Will yall ever think of producing RPK's ?? I would love to have a PSA-RPK with a side mount rail
Just got one and new to AK platform. My safety lever goes up past cover and it will fire. Thinking this is not normal. Is there an easy fix I can do or do I need to send it in to PSA to be fixed?
"And by the way, we did all that and kept the price point competitively lower than even the c-competitors"; freudian slip there in the stutter? after all, the name of your competitors also starts with a "K" sound... Either way, love it, the AKV seems to take the cake for AK Pistols.
I just received my brand AKV and found that the gas tube is wiggling with clunking noises.
Can the AK-V use any AK drop in trigger? Any recommendations on which trigger upgrades?
What's the trigger pull weight on the alg models? Heard many many issues with doubles etc.
Can you pleeeease do a run of more PSA scorpion specific mags!?!?!?!?!
They are available now through this link: palmettostatearmory.com/psa-ak-v-9x19mm-35-round-u9-patterned-magazine-5165448274.html
PLEASE PLEASE PLEASE release the 5.45x39 pistol already
Do you plan on making a extended bolt release?I am left handed.That would be a nice add on part.
I like the concept, I don't love that you made it with proprietary magazines.
How about making a Tokarev version using PPS magazines? (for those of us who bought 10,000 rds of 762x25 when it was 5c/rd ) ?
CZ mags aren't proprietary at all.
If they ever did build one in 7.62 x 25, your ammo is probably corrosive, and you would need to send it to Rob Ski to throw in his swamp to properly clean it!
When will they be back in stock???
When will be an AK-V 16 in barrel rifle for California market?
I need this gun in my life
Get it here: palmettostatearmory.com/ak-47/ak-v.html
I'm planning on getting a second one they're that awesome
Just ran my first 100 rounds in my AKV. The dust cover has a good amount of aluminum eaten up off the shell deflector/ ejection port. Is it normal wear?
Does it come with a sticker?
Sub MOA Yes they all do.
@@Klyce LOL! It's a joke. LOL! Everyone asked 3 questions to PSA. Where is the MP5, where is my sticker, and where is the AR that takes AKV mags?
@@j.m.8193 The first guy to completely cover his gun safe with PSA stickers, WINS!
kevin wilson 😂 that would be hideous and hilarious.
whens the psa rpg 7??
JoshIsParty Best comment yet! Or the PSA M249
Been having a problem with the ak-v after shooting a mag, bolt holds open, put new mag in, send the bolt home, and doesn’t fire. Look in and the round looks like it didn’t go in the whole way. Is it a problem with the mags or spring not sure. Any ideas?
Do standard magpul AK grips fit on the AKV? All furniture compatible ?
PSA has outdone themselves with the AK-V!
Now the world needs a PSA AK-102 with PSA or Magpul steel reinforced Bulgarian style magazines!!! No magwell adapters allowed please :)
A true purpose built American 5.56 AK is needed that doesn't cost everyone $2,000 to buy.
That's all great but and stuff where is the 10MM?
What is the buffer made out of and can you we buy spare ??
How long will that rubber buffer hold up?? Seems like a part that needs to get changed regularly?
Why would you think that? They sell a field kit for 20 bucks that contains the buffer if you're worried, but I've never heard of one wearing out.
When will it be back in stock
my akv has no "mac bracket" but it says it was made 9/10/20 on the box am I missing something?
Only 100 difference now. Still a nice gun
Is the gas system similar or the same compared to the vityaz