Just changed out my 2012 ford fusion passenger side. Easier than expected, the video provided all I needed to do the job myself. Thanks for taking the time to video and post. Much appreciated.
I wish you had shown more detail where the bolts and screws and nipples go when installing the headlight. I had an accident that took out both headlights. I am trying to put it back together piece by piece. The problem I am having is that I didn't get to take it apart. The little things are the most important. Your first video rocks brother.
could you do a step by step on just replacing the head light bulb. i see some where you have to take off everything as you did here and some where just a couple of things have to be removed. i am not looking to break anything :) appreciate your time, thank you
I didn't detect any dielectric grease in the LED connector he removed and a great way to spur on corrosion and premature failure do to moisture as well as excessive amp draw
I have a 2010 Hybrid. Do I have to take the whole bumper cover just to change bulb. In the Hybrid the battery sits right behind the light so no way to just reach in there.
Great video, but I think youve only dealt with eBay HIDs.. Your ballast looks like the Typical eBay rebranded chinese junk. Ive had the Morimoto Elite kit on mine for 4 years now, a true $200 kit. And a little lithium grease goes a long way.
Thanks for taking time to make this video. I bought a 2011 Fusion Hybrid and it needs headlights(cracked lens). Looks like the same between 2011 and 2012 hybrid or not.
I need to replace the dust seal cap on back of the headlight. Do you know where I can get it? or can you find out the diameter of the seal cap for me? Thank you.
This was a huge help! Got the headlamps changed on my 2012 ford fusion se with no problems thanks to the good instructions and examples.
Just changed out my 2012 ford fusion passenger side. Easier than expected, the video provided all I needed to do the job myself. Thanks for taking the time to video and post. Much appreciated.
It’s incredible the lengths they make you go through to change a lightbulb
Great tutorial! Easy to follow. Would not have gone near as smoothly or quickly without this.
I wish you had shown more detail where the bolts and screws and nipples go when installing the headlight. I had an accident that took out both headlights. I am trying to put it back together piece by piece. The problem I am having is that I didn't get to take it apart. The little things are the most important. Your first video rocks brother.
Thank you, just replaced a headlight and could not have done it without this video. Piece of cake, great instructions!
One of the better videos I have seen. Thank you very much for a clear, concise demo. And, and, can I have the right sight assy. you took out? 🙂
8:34 it’s a Allen key, I used one on mine worked great
Best video ive seen for replacing the lamp
could you do a step by step on just replacing the head light bulb. i see some where you have to take off everything as you did here and some where just a couple of things have to be removed. i am not looking to break anything :) appreciate your time, thank you
Nice and simple video...the way they should be. Thanks!
I didn't detect any dielectric grease in the LED connector he removed and a great way to spur on corrosion and premature failure do to moisture as well as excessive amp draw
Those scratches look good compared to mine.
This helped so much on my 2011 fusion my bottom fog light was full of water
Very detailed! Thank you for the help!
I have a 2010 Hybrid. Do I have to take the whole bumper cover just to change bulb. In the Hybrid the battery sits right behind the light so no way to just reach in there.
Hey, did you ever find out?
Thanks helped me out to this day 💯💯
Thanks for this video! I just smoked a deer and it took out my passenger side headlight only luckily!
Man i feel your pain hit a coyote over here on the West Coast
Thanks for the video buddy!!
Very helpful. Thank you.
Great video, but I think youve only dealt with eBay HIDs.. Your ballast looks like the Typical eBay rebranded chinese junk. Ive had the Morimoto Elite kit on mine for 4 years now, a true $200 kit. And a little lithium grease goes a long way.
So why did you not say what to do about the corrosion? is it not okay to mess with it and use a electrical spray cleaner>?
Do your front yellow side marker lights blink with your turn signals on your Fusion ?
How long did the whole job take you
Thank you sir, big help.
You should do one how to remove the grill
Thanks for taking time to make this video. I bought a 2011 Fusion Hybrid and it needs headlights(cracked lens). Looks like the same between 2011 and 2012 hybrid or not.
Jeasus i think crocodile dun dee wants his knife back lmfao
Standard Marine Corps issue knife, does it offend or scare you?
Thank you
I need to replace the dust seal cap on back of the headlight. Do you know where I can get it? or can you find out the diameter of the seal cap for me? Thank you.
How about using electro greas to prevent corrosion
Used electrical grease on your connectors and you won't get corrosion
This dude is a back yard mechanic at best.
Long as you got a seal to keep the moisture INSIDE the headlights and a Kabar for when "shit gets nuts", lol.
where can i get the same white bumper at?
My driver side dim light won't work on my 2010 ford fusion. The fuses are good. What can i do
I have i few questions I have a Ford Fusion as well
Shoulda just followed the video in the first place 😂
I’ll buy your headlights
Question...headlight has no power going to it and i cant find any fuses...do i replace the whole headlight?
Matthew Sumpter harness is good. but no power. I can't find the fuses.
fkgolddiggers The fuse box for the headlights is under the steering wheel.
Hey sell me the old ones.
Kristy
lol--wtf dude--just take off resevoir and bamm--u can get to them--none of this bs fender crap lol--