Gbody With Hydros | Shocks Removal | New! Deep Cups '83 Regal AKA Ese Regal
ฝัง
- เผยแพร่เมื่อ 2 ก.พ. 2023
- Time to remove the shocks off the Regal. I also install some deep cups to the rear. I've had these cups for a very long time.
Visit our store below. Thank you for the support!!
stillstandingstore.com/
Instagram👇
/ diaze_stillstanding
#83regal #StillStandingGarage #GbodyStillStanding - ยานยนต์และพาหนะ
![ความรักไม่ได้น่ากลัวขนาดนั้น (TRUST ME) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/9np-lAtCRpQ/mqdefault.jpg)
Nice bro thats old school right there cant wait to see the poweballs and rear end work your gona do!!!
Definitely is. I can't wait to upgrade 💯. Thank you for watching 🤝💯
Great videos. Keep them coming.
Thank you 👊💯
Power balls and super deep cups brother
That's the next upgrade 💪💯
Nice bro. Your videos have helped me with my G more than once. Hell yea to many more
Appreciate 💪. Thank you for watching 👊💯
Great info bro, love them G bodies!👍🏾
Thank you for watching 🤝💯.
Definitely a nice car
Thank you 👊 💯
Looks good I had my cylinders like that till I did three wheel and the bolt snapped off so I put powerballs on after that.
Damn 😳 yeah I don't want that to happen. It's crazy because I used to drive this car hard. I definitely need to upgrade that. Thank you for watching 👊💯
Shaaaaooooooooo
🔥🔥💯 Still Standing 💪💯
Nice man, I had shocks in mine but i dont think they were doing much as they weren't heavy duty truck shocks. might look at replacing them with shocks out of a blazer. ext is only to 22" and down to like 14" so it will get you low to the ground. I do have a set of Monroe 32225 because i have 12" rams at the back but they wont allow the car to go low.
Good to know my car isnt the only one that sounds like that in the rear with the squeak noises lol
Good to know. I'll look into those other shocks. It was making the noise because they needed to adjust after putting them back in. If you'll look at the beginning of the video, it wasn't making that noise. I don't like that sound, to be honest, lol
Looks like it time for some power balls on this bad boy
I couldn't agree with you more. It's most definitely time 💪💯. Thank you for watching 🤝.
I’m more of a fan of the blue car you painted the Monte Carlo
I'm dropping a video on the Monte next Friday 2/10/23💯. Be on the lookout out 💪😎
There it is big homie... the people's choice the 79 Monte 😎
Need an update on this car bro I’m planning on getting one by the end of the year, been liking your vids, hope you’re good g
Appreciate it. Haven't done much to the Regal other than buy new front tires. I'm aiming to upgrade a few things by the end of the year. Thank you for watching 👊 💯
@@StillStandingGarage all love blessings to ur family
Saludos 🤝
Saludos 🤝💯
Whoever lifted your car kinda cut some corners it’s not horrible but could definitely have been better. They should’ve used a heims joint instead of welding that piece of pipe or steel bushing to the cylinder. If you can’t grind it off and screw in the power ball you may have to get new cylinders. Good luck with your ride i enjoy your videos.
Yeah they most definitely did and I'm realizing this 18 years later. I used to drive it everywhere and hit the switches on anything and everything lol. It never broke down. Which is why I'm surprised. I'm planning on buying new cylinders when I add the power balls. Thank you for watching 🤝💯
@@StillStandingGaragedamn you’ve had it for that long ? I’ve had my cutlass for about the Same amount of time. Got to get back on it. It’s been sitting in my garage for too long.
Yeah, I bought it in 2001 and had the hydros installed in 2005. Drove it hard for about 2 years and parked it. Tried to bring it back out in 2009, but it didn't work out. So, I finally started on it again in 2020 or 2021, something like that.
The blue Monte Carlo paint job came out CLEAN, a lot of labor, what would a Body Shop charge for a quality paint job, these days. Any idea??? Thanks
Thank you! I really appreciate it. I believe a quality paint job will start at 10k. Thank you for watching 👊💯
Hey brother how’s the difference between having shocks and no shocks? Thx 🙏🏼
The ride is smooth with the shocks. Without them, it's loose and bouncy. Thank you for watching 🤝💯
Them 4 dumps is for standing 3 wheel nice
You know it 💪💯
Im gonna borrow your idea 4 my cutlass
That's what's up 🤝
6 batteries to the back and it’s that slow homie? I have 3 to the rear of my Lincoln ass end hops off the ground
Yeah, it's slow. It's a very old system. I want to upgrade. I've had this system since '05.
Is it safe take hose off while car is lifted or needs to be dropped any help is appreciated
It needs to be dumped. If it's lifted and you remove the hose, oil will go all over the place. The cylinder will be under a lot of pressure.
@@StillStandingGarage thanks for for your help
No problem 🤝
Are your batteries low? Cuz running 6 to the rear it should come up with 2 licks
No, they were fully charged. I have front coils cut down to about 4 or 5 turns in the back. Plus, I have 12 inch cylinders, so it takes more than 2 hits to fully lock up. Thank you for watching 🤜🤛💯
@@StillStandingGarage you welcome homie keep on riding
What shocks are you goin to run? By any chance do you know the mesurement when they collapse? I been wanting to put some on my cutlass but cant find the right ones.
I might not run shocks for a while. I don't know off the top of my head. I'll get the part number off the shocks and send it to you.
@@StillStandingGarage thanks
Here's the part number: Gabriel 61543. They're on Amazon too 🔥💯😎.
@@StillStandingGarage orale thanks bro i appriciate it. Hopefully you can make it to the cruise i sent you the flyer of yesterday on ig.
No problem at all. I'll try to make it 💪💯
What size cylinders do you have on the rear
These are 12s
Come out with more videos Man
I hear you. They're coming 💪💯. Thank you for watching 🤝.
Are the A-arms extended
Yes, they are extended an inch.
Looking good bro
Thank you 🤝
How come you don’t have power balls
That's how they were installed back in '05. I didn't know much about hydros. I just wanted my Regal to have hydros, that's all I knew 😂. Now I'm doing it all myself 💪💯