It's time to put my Regal back together and drive it. Visit our store below. Thank you for the support!! stillstandings... #83Regal #StillStandingGarage
Sweet I've been working on my sons 65 SS impala for a few years now doing 98% of all the work myself it has been in our family since the 1980s got a few videos of in on my you tube channel under my name along with my hobby builds ill be doing more videos on the 65 SS soon
Don't know how late I am ..in 2013 I had a 87 limited and got bumper fillers for rear on eBay. They were fiber glass. They fit pretty good holes we off not a big problem. They came primer. .over all i was satisfied. Ran about 500$ but that was back then. Keep up the good work. .
That's whats up! I didn't have luck with mine... I'm looking at gbodyparts. com for their fillers..hopefully they work out for me. Thank you for watching 👊 💯
Hey I have been looking for this set up, 2 pumps 6 domes . can you do a video how you plumbing the domes and wiring it ? I’m sure you going to help a lot of people like me looking for this set up . Thanks 🙏🏼
@Still Standing Garage clean ass regal also can u explain the double dump for rear for individual corners and how to wire it up also how much them bad ass batteries cost bro whats the cca on them and their reserve??? thanks clean regal
Got a 79 regal tried mounting the front hubs but I don’t have enough stud coming through what studs do you recommend and what length and kneel diameter for my knockoffs to be able to be mounted
I haven't swapped any of mine. You'll have to buy a set and install them. I would measure what you have right now and determine how much longer you want them.
I have a 12 prong switch for each corner. You can get creative with it as long as you understand how everything works. It's best to draw up a diagram to ensure you're routing everything properly so you don't fry anything. Thank you for watching 🤝💯
Sweet 🤙I pulled my lowrider out last fall and went hoping only did 24" and my kandy has gone to hell. But it has a big block hanging out of the hood and it still runs great 👍. So I'll be restoring it on the channel I recently started but I think I'm going to slap a couple other cars together before the restoration. Check me out if you're interested. I have other shit going on too. A couple turbo cars my big bass escalade and I paint as well. I subbed cuz you know we still sanding mane🤙
Around 35 to 40 psi... I know some run them pretty high to get a better hop, but for me I'm just happy I got it back up and functioning. I'm planning on redoing the whole hydro system in the future. This one here is super old now and very tired.
Oh nice! Yeah I'm thinking of upgrading to some power balls so I can fit some super deep cups...I want to sit as low as I can... I ordered the deep cups, for now, since I still have square tubing at the end of the cylinders on the axle.
@@StillStandingGarage okay nice yea power balls is what i have i put the deep cups so the cup can completely sit over the power ball and sit lower i also cut the pre-cut coils. I like sittin low
It depends if the frame is still straight. If it was reinforced and it's still good I would say it's worth it nowadays. Prices have really gone up on these cars and some are too much in my opinion. I would also make sure the motor and tranny are still good. It also depends on what you have planned for it.
Hell yeah it sounds good. I just might throw some on mine. I wonder if it would sound good with the Original 2 bbl carb. Or would I have to switch to 4
That's the plan...looking to do this once I replace the rear cylinders and reinforce the rear end...check out the latest video, I go over that when I remove the shocks...thanks for watching 💪💯
Some questions i have Ok gotta friend of the family that has a 1987 regal for sale 4500 but needs tlc like new upholstery, paint and maybe some new parts it runs but not perfect. I love in cali and just became class a driver so when i get my 10k bonus i wanna get it and put money in so how much am i lookin at for hydraulics?? Dont need it to bounce to the moon but i want front and back not side to side so if u have any idea what am i looking at for new set of hydraulic system and is it worth it
I have the seme problem this are not the original the ones i got are fibers glas cut them and put them in the car with the fander them put resin use a baby blanket dond use the fiber calas the shiit ich
The hydraulic switches are music to my ears
Same here 💯💯💯
Almost 20 years just sitting and looking pretty 👍🏾
I'm glad I kept it and tried my best to keep it out of the weather 💪🔥💯
He’ll yeah ready to cruise, looks good in the sun light.
Thank you 👊💯
Love the switches my friend would love to be cruising this whip.
It's a great feeling 💯🔥
Dope video! Always wanted a car with switches. Glad the regal finally seeing some sunshine.
Yeah it's a great feeling to be driving it again 💯
Homie put in a lot of work and it’s only the beginning…. Sweet vid bro.
Thank you 💪Definitely got a long way to go 💯 It's getting there...thank you for watching 👊💯
Looks awesome!!!😎👍 I really want to build a regal on switches when I get my own house with a garage- your car is a big inspiration!!! 👍😎
That's whats up 💯💯 Thanks for watching 🙏
@@StillStandingGarage 5
Love it!! It’s coming Along! 💯🔥
Thank you! Feels good to drive it again 😎
Well done! I enjoyed the whole video.
Thank you for watching 💪👊💯
Sweet I've been working on my sons 65 SS impala for a few years now doing 98% of all the work myself it has been in our family since the 1980s got a few videos of in on my you tube channel under my name along with my hobby builds ill be doing more videos on the 65 SS soon
Nice ride! I'll check out them videos for sure 👍🔥💯
Wheels look nice on the regal ..nice to see u took it out for a drive both regal
And Monte coming along real well 👍🏻
Thank you!! It felt really good taking out for a bit.... thank you for watching 🙏💯
Don't know how late I am ..in 2013 I had a 87 limited and got bumper fillers for rear on eBay. They were fiber glass. They fit pretty good holes we off not a big problem. They came primer. .over all i was satisfied. Ran about 500$ but that was back then. Keep up the good work. .
That's whats up! I didn't have luck with mine... I'm looking at gbodyparts. com for their fillers..hopefully they work out for me. Thank you for watching 👊 💯
Love it might put hydros on mine after paint check out my regal hopefully finish painting this weekend
That's what's up 💯...I'll check it out 💪💯 Thank you for watching 🤝
@@StillStandingGarage was able to spray the regal now just have to put back together thinking of hydros next any tips is appreciated
Nice! I would say to just take your time and do it right the first time
I Want To See The Finished Work! Good Job!!!
Thank you 🙏 💯
i’m in love with this car
Me too 💯💯🔥
My 87 cuttlass is juiced up i love it
Nice!!!
Dope bro dope comming along
Thank you 👊
Nice!!!! It's alive!!!!!
It was about time 💪💯
Good shit I haven't drove mines either in a while gotta get it going also
It be like that sometimes. It's a good feeling when you get back on it after a long time... thank you for watching 💪💯
15:05 that’s pretty clean compared to the Midwests rust belt
Nice ride
Thank you
Dope video man 🔥 I’m get myself a 87 regal soon man
Appriciate it!! That's bad ass! 💯
Sickk🔥
💪👊💯
Goals
👊💯
Awesome
Thank you! 🙏
That's a sick car bud
Thank you 👊
Ooh shit son! Let’s go!
💯💯😎
Bad ass compa
Gracias 🙏🔥💯
Bro, can you please explain the 4 dump set up a bit more? Thanks!
Once I start upgrading the hydro system, I'll definitely document all of it and explain as much as I can 💪💯. Thank you for watching
Hey bro can you do a video on how you have those four dumps plumbed up and wired
Yeah that will be a future video. Thank you for watching 👊💯.
i need to get me a monte looks good homie 💪🏽💪🏽🔥🔥
Gracias 👊💯
I believe someone makes those bumper fillers in metal...
Ima look into those
Hey I have been looking for this set up, 2 pumps 6 domes . can you do a video how you plumbing the domes and wiring it ? I’m sure you going to help a lot of people like me looking for this set up . Thanks 🙏🏼
I'll try and make one... I have a few videos on the Regal I need to upload but that'll be after the Monte is cut and buffed.
@Still Standing Garage clean ass regal also can u explain the double dump for rear for individual corners and how to wire it up also how much them bad ass batteries cost bro whats the cca on them and their reserve??? thanks clean regal
Awesome video i wood love a video of the suspension how the hydro's was installed and how it works
That would be a good video
@@StillStandingGarage that way give someone an opportunity to see what it does maybe they might want to try it for their car
You had no switches has me wanting to do a Cadillac like we talked about before
That didn't come out right. I meant to say you hitting those switches
I hope it doesn't annoy you me texting you so much it's that you're motivating me I want to work on my car
did you have to shave the calipers? what about spacers if so what size?
I didn't have to shave mine, and I didn't use any spacers. Thank you for watching 👊💯
@@StillStandingGarage hell ya thats great to hear
Can you make a video on how to wire 4 dumps to one pump or can you upload a wiring diagram?
Once I start upgrading the hydro system I'll definitely document all of it and explain as much as I can 💪💯. Thank you for watching 🤝
Chrome those grills and the ones u don't use u can get lana loot fedii lol $$
I know right! They go for a lot nowadays 💰🔥💯
Got a 79 regal tried mounting the front hubs but I don’t have enough stud coming through what studs do you recommend and what length and kneel diameter for my knockoffs to be able to be mounted
I haven't swapped any of mine. You'll have to buy a set and install them. I would measure what you have right now and determine how much longer you want them.
For your back corner switches are they 3 prong or something else? And is three wheeling only possible with a 3 prong switch?
I have a 12 prong switch for each corner. You can get creative with it as long as you understand how everything works. It's best to draw up a diagram to ensure you're routing everything properly so you don't fry anything. Thank you for watching 🤝💯
Dang where do u live alaska?? No rim shops
Lol... everyone was out and the ones that had a set wanted a ridiculous amount for them...they were trying to capitalize on the situation
Whats the instermantal behind it ?
19:07
Looking good so far. What brand of spokes did you get? That's not something that needs to be cuttin' corners on...
They're china's.. They're holding up so far
Sweet 🤙I pulled my lowrider out last fall and went hoping only did 24" and my kandy has gone to hell. But it has a big block hanging out of the hood and it still runs great 👍. So I'll be restoring it on the channel I recently started but I think I'm going to slap a couple other cars together before the restoration. Check me out if you're interested. I have other shit going on too. A couple turbo cars my big bass escalade and I paint as well. I subbed cuz you know we still sanding mane🤙
Nice! Sounds like you got a lot of content coming I'll go sub to your channel and check them videos out... thank you for watching 🤝💯
Crazy question what's the PSI you run in your wheels
Around 35 to 40 psi... I know some run them pretty high to get a better hop, but for me I'm just happy I got it back up and functioning. I'm planning on redoing the whole hydro system in the future. This one here is super old now and very tired.
donde consiguistes la tapa del aceite de motor me puedes mandar el link?
Ese se me hace que lo compre en el Autozone.
She so gangsta bro
We need an update bro
Have a few other videos on the Regal after this video. Check them out. Thank you for watching 👊💯
Get the super deep cups thats what i put on my cutlass and it sits low
Oh nice! Yeah I'm thinking of upgrading to some power balls so I can fit some super deep cups...I want to sit as low as I can... I ordered the deep cups, for now, since I still have square tubing at the end of the cylinders on the axle.
@@StillStandingGarage okay nice yea power balls is what i have i put the deep cups so the cup can completely sit over the power ball and sit lower i also cut the pre-cut coils. I like sittin low
How many tons are your pre cuts?
I believe they were 1 with like 2 loops, should have gotten 2 tons
Oh ok yeah I've been looking at them 2 ton pre cuts
therea 81 regal wit swiches already car looks alright you think its wroth 8k
It depends if the frame is still straight. If it was reinforced and it's still good I would say it's worth it nowadays. Prices have really gone up on these cars and some are too much in my opinion. I would also make sure the motor and tranny are still good. It also depends on what you have planned for it.
What motor is in this regal
It has a Buick 231 3.8 V6
You can fix that easy
Is it a v6 with duals?
Yes it is
Hell yeah it sounds good. I just might throw some on mine. I wonder if it would sound good with the Original 2 bbl carb. Or would I have to switch to 4
Yeah it'll sound about the same... I had mine installed before going with the 4bbl
What size cylinders are you running in front and rear?
8s in the front and 12s in the rear
Do you know if those hood shocks work for trunks also?
They do. I have some long ones for my trunk. I have a video on my Instagram page.. hit me up on there and I'll send you the video 💯
@@StillStandingGarage that’s cool man can you send me the link please
instagram.com/p/CR7dGXUhzXi/?
Where do u buy ur bumper fillers at?
The next set I buy is going to be from gbodyparts.com
Where’d you get the rims?
Galaxy Wire Wheels
Did you try tire rack
I didn't but I eventually found some
@@StillStandingGarage you might want to stock up LOL
Just wow! I love you cars brother!! Really do!
Thanks 👊💯
Come check out " Drop Shop Garage " for more really cool car videos ..
What color you going with big dog
I'm thinking of keeping this one white but add some pearl.
Oh yeah that's gonna nice bro... Great work, and pls keep the video's coming...
Thank you! And I appreciate you checking out my builds 👊🔥💯
Are the rims 13s?
Yes they are
Use power balls guy
That's the plan...looking to do this once I replace the rear cylinders and reinforce the rear end...check out the latest video, I go over that when I remove the shocks...thanks for watching 💪💯
ayuda homie tengo un 92 regal
Como te puedo ayudar?
Some questions i have
Ok gotta friend of the family that has a 1987 regal for sale 4500 but needs tlc like new upholstery, paint and maybe some new parts it runs but not perfect. I love in cali and just became class a driver so when i get my 10k bonus i wanna get it and put money in so how much am i lookin at for hydraulics?? Dont need it to bounce to the moon but i want front and back not side to side so if u have any idea what am i looking at for new set of hydraulic system and is it worth it
I would say to plan for 3k to 5k for a nice set up with arches reinforced
I sell badass accessories door vents door lock tank plugs switch extentions that will look good on your car bro
That's whats up... got a website?
I'm looking for someone to install hydraulic on a regal. Inbox me if you can help with that
Hey what's up! I don't do installs at the moment.
Who does? I'm located in Georgia. I just want something simple. Fbss
You'll have to research it for your area. I'm not very familiar with Georgia fabricators.
Sell me your stock wheels
I can't I still need them
Orale, let me know when you ready
I have the seme problem this are not the original the ones i got are fibers glas cut them and put them in the car with the fander them put resin use a baby blanket dond use the fiber calas the shiit ich
I found some better ones on gbodyparts.com. That's what I'm planning on buying. Check them out. Thank you for watching 🤝💯