Just like changing the cluster in my xd I had I thought that was an xd cluster you were sticking in Dave 👍👍 I am going to paint my ef white on top and mercury silver lower
Hey mate great progress I noticed when you changed the IAC you had no gasket. That can cause vac leaks and the inlet manifolds are commonn for leaking on the Ford I6. That can also cause idle issues.
G’day , thanks for that but I did actually have a gasket there after cleaning off the manifold face of the old one. Since doing this I discovered that the pcv valve wasn’t working which affected the idle. Thanks for watching and the tip.
Ha ha, yeah that’s slowly progressing as well when time and money permits. Nothing exciting just an evo powered, slightly raked wg front with 16” spoked rims.
Thanks and likewise have a good one. I’ll be busy preparing for a Summernats trip , can’t wait for that as it’s an awesome time to catch up with mates.
Thanks, hopefully on the road in the new year. Will be collecting the new/old rims for it at Summernats and then adding the lowered springs to the front at same time.
I have been looking at ford vans since I seen your first video on the van , And in NSW mate they wont a small fortune for them . And to be honest most are junk . Cheers. (:
Nope, they were absolute pains in the bum to get at, I’ll use it like that until I do 5,000 klm and it’s due for a service and if I have no dramas with dash then I’ll refit them.
I had a '95 wagon once that I got real cheap. The people on the property down the road from me had a Tickford V8 sedan in his paddock that he bought for 300 dollars. However, when he picked it up from the seller, they'd bashed in the front and rear ends, so he didn't want it anymore and gave it to me. The plan was to a front-end panel swap with the wagon and bush panel beat the rear into shape. Sadly that didn't happen. Not sure where those vehicles are now.
@@ablokeinatroopyaustraliawide Well, that was the original plan, swapping the Tickford into the wagon, but I didn't have a shed to do the work, so swapping the wagon panels onto the front of the Tickford seemed the best route. A 'stealth' Tickford...A V8 wagon would have been nice though. Time and travel issues prevented me getting the thing done, sadly.
Good luck with the roadie mate
Thanks, will be ready in first week of new year hopefully.
Just like changing the cluster in my xd I had
I thought that was an xd cluster you were sticking in Dave 👍👍
I am going to paint my ef white on top and mercury silver lower
Nice colour choice, on this I’ll be painting the lower section nemesis grey which was a sierra colour and the same as the svo falcons .
Hey mate great progress I noticed when you changed the IAC you had no gasket. That can cause vac leaks and the inlet manifolds are commonn for leaking on the Ford I6. That can also cause idle issues.
G’day , thanks for that but I did actually have a gasket there after cleaning off the manifold face of the old one. Since doing this I discovered that the pcv valve wasn’t working which affected the idle. Thanks for watching and the tip.
@@ablokeinatroopyaustraliawide Great to hear it’s sorted.
Looking really good mate been lot of fun watching from find to drive Keep em coming
Cheers and Thank you for watching 👍🏻
She’s looking the goods mate ,, looking forward to seeing more.👍
Thanks, will be plenty more to see as the van progresses if I get to do everything I’ve got planned for it.
The van is coming along nicely, but id rather see progress on the hardtail in the background
Cheers mate
Ha ha, yeah that’s slowly progressing as well when time and money permits. Nothing exciting just an evo powered, slightly raked wg front with 16” spoked rims.
Bit amazed that you found the sports dash, and it all works✌
Purchased it off eBay , no warranty and untested so it was a luck of the draw job. I was nervous that it wouldn’t work I can tell ya.
This project is moving right along!
Sure is, hopefully on road in next few weeks.
Thanks for watching
Looken good coober. Have a good christmas and new year mate.🤠
Thanks and likewise have a good one. I’ll be busy preparing for a Summernats trip , can’t wait for that as it’s an awesome time to catch up with mates.
@@ablokeinatroopyaustraliawide 🤠
The van is coming along nicely.👍
Thanks, hopefully on the road in the new year. Will be collecting the new/old rims for it at Summernats and then adding the lowered springs to the front at same time.
Vans looking good an coming on great. Cheers!!
Thanks, can’t wait to get the new rims and tyres on it. Hopefully rego in a few weeks
Ducks nuts,good job
Cheers, thanks for watching
nice sports dash
Thanks, I think it’s much better than the stock one.
I have been looking at ford vans since I seen your first video on the van , And in NSW mate they wont a small fortune for them . And to be honest most are junk . Cheers. (:
Yeah it’s surprising how much they ask for junkboxes….
Did you put the bottom 2 screws back in ?
Nope, they were absolute pains in the bum to get at, I’ll use it like that until I do 5,000 klm and it’s due for a service and if I have no dramas with dash then I’ll refit them.
I had a '95 wagon once that I got real cheap. The people on the property down the road from me had a Tickford V8 sedan in his paddock that he bought for 300 dollars. However, when he picked it up from the seller, they'd bashed in the front and rear ends, so he didn't want it anymore and gave it to me. The plan was to a front-end panel swap with the wagon and bush panel beat the rear into shape. Sadly that didn't happen. Not sure where those vehicles are now.
I was so hoping that was going to end in an engine swap story….. thanks for sharingb
@@ablokeinatroopyaustraliawide Well, that was the original plan, swapping the Tickford into the wagon, but I didn't have a shed to do the work, so swapping the wagon panels onto the front of the Tickford seemed the best route. A 'stealth' Tickford...A V8 wagon would have been nice though. Time and travel issues prevented me getting the thing done, sadly.
Only thing i think of is retoque your heads before a hot day. God bless marry xmas. ))))) mick )))
Thanks and merry Xmas
👍🏻💯🇦🇺