Foxbody Team-Z Street Beast Control Arm Install
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- Installing the Team-z street beast. Relocated upper control arms and lower double adjustable control arms.
This video we install and talk about the street beast kit from Team-z motorsports!
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
You’re the reason why I bought my 86 t top and I am so thankful for you and your channel. Thank you and keep up the great work.
Hey if I can influence others to spend money along with me I will! Welcome to the new Fox addiction! Appreciate the comment man.
Slick idea putting the springs in jacking up one side and lower the other. I’ll keep that in the old book of tricks. You son is very polite to says a lot about your parenting good job sir. Me and my 2 sons(9 years old) are going to pull and reseal the 5.0 next week in my car . Gets the kids using their hands and brain 😊
Awesome man! Much thanks. I just share down to my kids what I was taught. My son is a thinker for sure...just need him to want to be more hands on with the cars. I think he'll get there when he gets a little older.
Kick ass control arms, cant wait to see how they perform.
Team Z FTW! I have the anti roll bar to keep from lifting the left front from torque on launch. To drive on the street I just unhook 1 link. You’ll feel like it’s a new car with this kit it works great 👍
Sweet! Glad to hear this
Awesome vid Mike. I suggested the Street Beast arms to you in an older vid and I'm glad to see you settled on those. I will be putting them on my car as well.
Sweet! Yeah you did. A lot of folks suggested MM, panhard bar, etc. lots of good options, but this setup looks pretty slick.
Great video and good job on the kit. Something to look into for my project next year. I need a shopping list of stuff. It is great to see you and your son. Keep up the good work.
Thank you sir!
When I put my control arms in, and they where just lust the regulars, just like the ones you originally had. They where a pain.
But you know I found a little truck. If you jack up on the right side p side of the axle they magically go right in.
No joke, jacking up on the passenger side for both the right and left side control arms gets it done.
You ain't kidding, that suspension work always leaves me racked.
Even when I was younger. Lol the impacts help, before I used to just wrench it lol.
Young Ladd. Another good job, well done.
Why thank you sir! That is key...knowing to rock the axle one side to another, or like you said jack one side up helps the angles.
Beautiful setup, but ass backwards with the install. Curious to see how the uppers go in! Love the channel man, good to see someone learning as they go. Very inspiring!
Appreciate it man. MOst is a learning process, sharing my experiences with others...Ive replaced, removed and installed rear-ends in foxes before. Once other time on this car and never had an issue putting it in lowers first. This was the first time It dawned on me that "maybe" doing the uppers first would be easier.
Good work on the stang as usual. Connor's front teeth missing are fun times. My kids would say they ate a knuckle sandwich for lunch, Hahah. So Cute at that age.
Thank you sir always! Pretty damn cute, I agree...I biased because hes my kiddo, but I do love the age hes at.
Nice to see back to back vids Mike! Missed ya at TMI. Car is looking epic. UNO!
Yeah! How was it this year? Weather was nice. My car was down of course, hoped to have it by then, but just didnt work out.
@@HOUSEOFDULA Pretty good, worth the drive. Was hoping to see more foxes from NTFB's but was good.
Man a lot of folks boycotted it from last year...It is what is, I would have come if the car was ready.
So would you stay with the team z now that you've had it installed? Or would you go panhard torque arm set up?
Hey Mike, I've heard one of the best mods you could do to your car is a Pan hard bar for your rear end. I bought one and haven't installed it yet, they say it makes your car drive like it's on rails.
The bushing tool from Maximum Motorsports is really necessary for removal/install on the car. It's the best $40 you'll ever spend.
Where’d you get the MB plate from on the wall ?! Did you live there ? Just curious. Great videos !
Hell yeah team Z! They’re local to me
I had the same problem with my team z set up the center bolt on the uppers
On the upper in pretty sure they recommend you close them up all the way and then use an angle finger to set it to -2 1/2 degrees
I hope all is well with you and your family after the tornado hit.
Thank you for your concern! We are fine, it hit in the Dallas area, Im more south Fort Worth / Arlington area. We got heavy rain and hail last night, but luckily no damage.
This is my favorite vid right ✅ 🤣 here,,much mush love 💘 ,,,oh maybe 🤣🤣🤣
You the man dula! love this car. You're one of the guys that made me want to make my own channel on my sn95 build. You get a chance check it out.. Rock on man thanks for your vids 🤙💪🏁🐎
Heck yeah man. Appreciate it. Do it! More content the better.
Team Z all the way. Wish Dave would just give me free stuff from his company lol. They have amazing products. I plan to only use there stuff on my fox.
Me too man! I paid full price for this and everything on this channel lol No sponsors here man, not that big yet.
Once again, awesome video!!!
Thank you sir!
UNO, nice install.
UNO
What springs are those car looks great!
SVE Lowering springs. They are made in USA. Been fine for me.
Way to go Mike!
Thanks Brian, appreciate it.
Ah , I just went with the summit arms . Cars pretty much stock to . There’s no way possible that setup not going to be banging and clunking with a lot of road noise. Everyone has different levels of tolerance tho .
This is true. Stock rubber will be the most quiet, but Im willing to be these will be pretty smooth and clunk free! You always have to give and take a little for the price for performance.
These are sweet
Hey biggen. Where bouts are ya located? Im in Greenville east of Dallas. Would love some input on my build.
Hey man! I'm in south Arlington / Mansfield area.
@@HOUSEOFDULA Coolio. Well, yall might shun me. I have a '93 BMW 325is swapped with '89 5.0. B303, GT40 heads Edelbrock RPM intake and will be installing a Holley Super Sniper EFI I just got along with finishing up my On3 single kit I got from Turbokits.com. Have to do some cutting and welding on hot pipes since the Foxbody kit doesnt fit exactly with this car. Car has the C4 trans as well, 3200 stall. And 3.91 original LSD rearend.
Do you think it would be easier to put the uppers in first? I have to do mine this weekend
Well maybe with a lift. On the garage to get the uppers in first you need lift the axle higher up, balancing it on the jack and get your body up in the upper mounts. Might be easier, but on the floor in garage its likely safer to do the lowers each side at a time. Worked for me. Just tilt the axle to get each side in.
@@HOUSEOFDULA I meant into the torque boxes first. Love the build man
@@MrDesdaman - My bad! Man It doesnt matter. Lowers we're much simpler, so yeah knock out the top to get it over with ;)
Bro wall you're talking there's music playing what is it I love it 😎
In the garage background? or at the end when I'm talking? Which part.
HOUSE OF DULA the song in the beginning
Size rear end 8.8?
Yessir
Why does the cut side of the spring have to the back what will it mess up if it's not
The cut on the lower end causes the spring to lean forward. Matching the acute angle of the lower control arms and upper spring pocket. It just lets the spring sit vertical. If it was 180 degrees It could bind the spring up.
@@HOUSEOFDULA ok thx
looks exactly like bmr's control arms
Its my understanding BRM has a "cloned" version of these.
dula coil overs would change everything on your fox and make a world of diffrence.
1st? Who cares I'm here for control arms for my rusty fox
Whats the intro song ?
Am I getting a Chris fix vibe?
Never really noticed and dont really watch a lot of his, but I'll take that as a compliment lol Hes been doin it a LONG time and at 8.5 MILLION subscribers, lets just say he's well off compared to me and doing something right
Should have just got the solid kit
Why? Just curious to hear others opinions.
I’m very very late to see your video. I have solid and will strongly advise against doing so especially if you drive on the street. With running solid my 03 Cobra is horribly noisy and it’s very easy to say one of my worst decisions I made on my car.
This my third time ,😂😂😂😂
Is that not the reason we have kids? To hand you the tools when they are older when working on your fox body mustang!!!
Ju Dula was up ,
Yeah that kit ain't $600 anymore, more like $900 now
Dang, no kidding...man everything is still so crazy right now. 300 buck inflation to do lack of materials sucks.
The mony u $$ they should have in the kit ARP bolts , to bad.😕😐
I agree. A $600 + kit should come with new bolts.
Dude just clean the bolts 😒