Thank you for explaining everything. I’m older and alone and can’t afford a plumber for all the little things that need to be done. This was one of them. God bless…🙏🏻👍🙏🏻
Hey thanks for the video, so many people want the spigot replaced instead of maintained. Glad to know how to maintain my/ my neighbor's properties more. Thank you.
it saves me 250$, just got quote from local plumbers company and after watching this video, goes to homedepot to buy gaskets and fix time takes 15 min!!! saved 240$
thank you man everyone else shows removing entire assembly, mine wouldnt move at all. i was able to repair my leak with your video thank you. btw only cost me 2 bucks
Out of curiosity, with those rubber washers being so cheap, why wouldn't you just replace them both? Preventive maintenance, not reactive maintenance. Still a good video because a lot of people wouldn't know what to do in this situation.
Nice explanation. I'm about to do this to my outdoor faucets on my 1966 house. The faucets look original and I'm assuming the washers might have been replaced once (can't imagine they lasted 54 years). I'm hoping the new washers will last another 30 years.
@@dncndan1 - that is true!! One must accept that Nothing works as easily as it appears in a youtube video - but the steps and the process and the right tools are what you need to get it done
Thanks for this video I had a plumber tell me he would have to cut my brick and replace the whole pipe inside the wall can you buy a new stem mine is stripped???
He used a wrench to turn off on water. I was told it would cost almost $100 to buy a water key. After seeing this video i dont need a water key to shut off my water in an emergency.
Not $100. I paid about $40 - $50 at the orange box store. It depends on far the turn-valve is from street level. Mine is about three feet down so I can’t reach it with a wrench and had to buy the water key. In the far north, they can be four feet below ground, due to the frost line. This guy sounds like he’s in the South, so they’re not buried very deep and he can easily reach it with a hand tool.
You really want me to believe that screw had been in water for 35 years, and it came loose that easy? Be, honest you loosened it prior to showing you unscrewing it, right?
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
Thank you for explaining everything. I’m older and alone and can’t afford a plumber for all the little things that need to be done. This was one of them.
God bless…🙏🏻👍🙏🏻
I've had a leaking faucet for yrs, and your video helped you.
Hey thanks for the video, so many people want the spigot replaced instead of maintained. Glad to know how to maintain my/ my neighbor's properties more. Thank you.
For something so small of a job, perfect explained and perfect video.
it saves me 250$, just got quote from local plumbers company and after watching this video, goes to homedepot to buy gaskets and fix time takes 15 min!!! saved 240$
thank you man everyone else shows removing entire assembly, mine wouldnt move at all. i was able to repair my leak with your video thank you. btw only cost me 2 bucks
Outstanding, glad it all worked out.
Out of curiosity, with those rubber washers being so cheap, why wouldn't you just replace them both? Preventive maintenance, not reactive maintenance. Still a good video because a lot of people wouldn't know what to do in this situation.
Thank you I was able to figure out the stem had to be screwed out. Thank you so much for your help!
Good job taking care of momma.
Nice job. Most plumbers would sell the customer a whole new hose bib.😀
Nice explanation. I'm about to do this to my outdoor faucets on my 1966 house. The faucets look original and I'm assuming the washers might have been replaced once (can't imagine they lasted 54 years). I'm hoping the new washers will last another 30 years.
Great job explaining...few people know what an easy fix it is, just need the step by step. Well done - I'm not a plumber, but have fixed quite a few!
Only problem is a faucet NEVER comes apart this easily.
@@dncndan1 - that is true!! One must accept that Nothing works as easily as it appears in a youtube video - but the steps and the process and the right tools are what you need to get it done
You really should have replaced all of the O-Ring gaskets since you had it apart.
I’ve watched you before. You should have been a teacher. Thank you!
You didn't want to just replace that second o-ring? Seems short sighted.
Thank you so much.for explaining thisnin details and slow.
nicely done..well explained video for the repair.. thanx much
You make it look so easy.. I wonder what will I find if I try to unscrew everything like you did.. Probably will mess it up
Maybe not. Be careful and take your time.
Did all go well?
Thank you for sharing you explained well to understand
Thank you 🙏🏻
Great video
Thank you!! I'll let you know how it goes!!
Do you think you could find the hardware for the faucet, my stem is kinda chewed up from using vice grips,Would make my life easier.
Thanks for this video I had a plumber tell me he would have to cut my brick and replace the whole pipe inside the wall can you buy a new stem mine is stripped???
Awesome. Thanks
Thank you ❤
35 years old lol I had to watch the whole video after that
Thank u…🙏🙏🙏
I’ve got the same issue but cannot get the old screw out
What size washer did you use? 1/2 inch?
He used a wrench to turn off on water. I was told it would cost almost $100 to buy a water key. After seeing this video i dont need a water key to shut off my water in an emergency.
Not $100. I paid about $40 - $50 at the orange box store. It depends on far the turn-valve is from street level. Mine is about three feet down so I can’t reach it with a wrench and had to buy the water key. In the far north, they can be four feet below ground, due to the frost line. This guy sounds like he’s in the South, so they’re not buried very deep and he can easily reach it with a hand tool.
It depends on how hard the valve is to turn… Sometimes a crescent wrench will not do it…
What other tool can i use besides an adjustable wrench?
Does it matter what size wrench to use?
You keep saying pliers. Called an adjustable wrench in my neck of the woods.
Hi! Where would you suggest we find a new piece. I believe the whole piece is broken :(
Maybe a local hardware store if one is available. If not, replacing the entire faucet is a bigger issue.
Most taps have replaceable seats as well...new rubber & seat...jus sayin
Shouldn't the leak stop eventually when u close the shut-off valve? Thank you
The water shutoff valve was for the entire house. When the valve is closed there is no water to anything in the house.
Why didn’t you replace other 0 ring since you got into it?
Replace the whole unit. Those after market o rings don’t hold up well
Using the crescent wrench backwards.
Pliers? looked like a wrench.!
Thank you very much!
❤
Saturday, 2021 0703 1804 EST
Righty tightly lmfao
You really want me to believe that screw had been in water for 35 years, and it came loose that easy? Be, honest you loosened it prior to showing you unscrewing it, right?
Why wouldn't you just change out all the washers at the same time?
Fix or repair? Is there a difference?
they sale the new screw foe that
Fix or replace you mean, fix or repair is redundant
Youshoeer views the easiest fix. Whathappens go these novices when they canteen getyhe handle off?
L)
fall sut why do u guys feels you have to tell a history or short story befor you get to it youre not a movie star