This repairing tutor vedio is so detailed and professional, after watching I got deeper knowing of my boosted board and its motor. But there’s not a “factory” for me to DIY.
Hey dude. Boosted boards is shutting down. We need you to teach more people this method so we can keep our boards going. Any chance you could also help us crack their proprietary battery management system code?
not sure if you saw but theres an easy-ish way to reset the RLOD without sending your battery in or soldering, its a video uploaded by user NomadNed, go take a look....shorting 2 pins on the bms circuit will trip it to reset.
Very simple tutorial! I will just do this each time my motor gets loose. just kidding, I'm not trying to be toxic. Too bad I wont find anyone like you here in Barcelona when my Boosted breaks 😭
Im pretty sure he even said the bad bearing is what caused the rod to get smaller. The bearing was busted up, so did not spin freely and thus made the rod smaller in diameter. Source: th-cam.com/video/tcegApIP000/w-d-xo.html So he cleared it up alright, the bearing causes the issue of the rod getting smaller.
@@ipasthemaster I plan to exchange the original boosted board truck motor mount with haggyboard.com/collections/haggy-drive-system/products/haggy-drive-system-2-in-1-street-and-all-terrain-version
I have three boosted mini x with 6 messed up motors with this problem, I don’t have the time or equipment to fix this myself, who can I pay to have my motors fixed in this fashion ? I’ll pay for labor parts and shipping cost
I used several types. These where steel rods, not alluminium. Most of them I bought on Aliexpress. Some where chrome-plated and had a very nice finish. Normally the rods where sold as 3d printer parts
IPAS PROJECTS after your shaft replacement did you find to last longer than BB shafts? Under replacing procedure you have used set on new bearings as we’ll correct? I’m concerned about boosted service now Days and trying to prepare for that common issue. Even was trying find aftermarket motors but no luck i guess probably would be possible if we had some schematics for wiring.
Hi man! Are you able to fix the motors? Would love to pay for your service - I have a 3 of those that would require repair ! Can I reach out to you somehow?
Sorry, making those shafts took me a pretty long time and machining is not really my thing. It was ‘just’ a project. I stopped riding and think about selling everything. I’ve read on reddit that there is someone fixing motors commercially.
On an expensive board like this! All this motors shit storm issue was on Low quality bearing, boosted seriously.... An excellent experience is to unmount the motor of a booosted V2 "the motor with a black shiny paint", comparing the Bearing beetwen the 2 motors
Or I can spend $100 for someone to do this for me. It’s gonna cost me thousands for any of those tools. Lathes aren’t cheap, but someone doing it for me and applying methods to prevent this (better materials) is. :D
Man you should make a bunch of these shafts and sell them on ebay!
Please do!!!
I’ll buy one and do it myself at home, I don’t have those CNC machines but I have a vice grip
I know a guy who makes these shafts...
Seth Mottahedeh I know the guy who makes the shafts @newyorkdiver
Barney Villalona can you give me his contact info
This repairing tutor vedio is so detailed and professional, after watching I got deeper knowing of my boosted board and its motor. But there’s not a “factory” for me to DIY.
Hey dude. Boosted boards is shutting down. We need you to teach more people this method so we can keep our boards going. Any chance you could also help us crack their proprietary battery management system code?
venutech has a fix for rlod. he fixed my rlod battery
not sure if you saw but theres an easy-ish way to reset the RLOD without sending your battery in or soldering, its a video uploaded by user NomadNed, go take a look....shorting 2 pins on the bms circuit will trip it to reset.
Very simple tutorial! I will just do this each time my motor gets loose. just kidding, I'm not trying to be toxic. Too bad I wont find anyone like you here in Barcelona when my Boosted breaks 😭
Fantastic video! An excellent exposé of the true problem and a brilliant tutorial method in your solution. Thank you so much!
That was a lot of work dude. I wish I can do that for my motors.
Thank you for finally exolaib clearly what happens instead of most people who just say it's a bad bearing. This video was awesomem
Im pretty sure he even said the bad bearing is what caused the rod to get smaller.
The bearing was busted up, so did not spin freely and thus made the rod smaller in diameter.
Source: th-cam.com/video/tcegApIP000/w-d-xo.html
So he cleared it up alright, the bearing causes the issue of the rod getting smaller.
Hi IPAS, have you considered starting a service to repair motors..? Where are you based/located..?
I think I would have attempted to shim the shaft before turning a whole new one. The trick with the copper wire is a new one for me. Nice
Amazing vid. Clear and easy to follow.. please do more
So, any chance you have a diagram/measurements of the new shaft? I'd like to send the design off and get a few made.
The dimensions of the shaft I made can be found on hq.ipas.nl/
@@ipasthemaster is it possible change the 3m motor pulley to 5m pulley
曾博新 then you also need to change the wheelpulley to an 5mm and I dont know if these even exist.
@@ipasthemaster I plan to exchange the original boosted board truck motor mount with haggyboard.com/collections/haggy-drive-system/products/haggy-drive-system-2-in-1-street-and-all-terrain-version
@@ipasthemaster imgur.com/a/NgEgK4m front truck already changed .
Do you make or sell the These up graded Motors with the New pullies?
Do you offer services?
Heya, same as others, I'd gladly be paying for your skills, time and effort. Couple of friends and i have a bunch of clicking motors :)
Thank you I have 4 sets my mini s gos through them pretty bad no clue why I run a pretty loose belt gonna try to fix the motors 👍
Where did you got the bigger pulley for the motor?
Aliexpress. Search for 3m pulleys.
Great Video. Thanks for posting. You are a clever chap.
nice thank you :) but how you get the replacement parts ?
Much respect. Thank you for the video. Exactly what I was looking for. Take care
I have three boosted mini x with 6 messed up motors with this problem, I don’t have the time or equipment to fix this myself, who can I pay to have my motors fixed in this fashion ? I’ll pay for labor parts and shipping cost
I dont have this equipment anymore, but do have.a bunch of repaired motors like these. I am willing to sell them
@@ipasthemaster is this still the case? Regards from a half dutch half Norwegian in need of new motors 😄
@@ipasthemasterAre motors still available?
Just out of curiosity which board do you have the bad motor on?and whats the milage it went bad? @@jreyna1224
hi do you sell repair kit axis pulley ets...?
Awesome video! Where did you get the motor ?
Excellent video, i don't have this problem but it was very informative. Boosted boards are the best.
hello How to waterproof it?
What is the technical specification of dc motor?
Hi, what type of aluminum rod did you use for the shaft?
I used several types. These where steel rods, not alluminium. Most of them I bought on Aliexpress. Some where chrome-plated and had a very nice finish. Normally the rods where sold as 3d printer parts
@@ipasthemaster Thank you very much
IPAS PROJECTS after your shaft replacement did you find to last longer than BB shafts? Under replacing procedure you have used set on new bearings as we’ll correct? I’m concerned about boosted service now Days and trying to prepare for that common issue. Even was trying find aftermarket motors but no luck i guess probably would be possible if we had some schematics for wiring.
Hi man! Are you able to fix the motors? Would love to pay for your service - I have a 3 of those that would require repair ! Can I reach out to you somehow?
Sorry, making those shafts took me a pretty long time and machining is not really my thing. It was ‘just’ a project. I stopped riding and think about selling everything. I’ve read on reddit that there is someone fixing motors commercially.
how have they held up ?
What size are those motors? 5045?
so did boosted get the motor thing figured out I don't wanna purchase a new stealth and have this motor issue happen!!
How much would you charge to do that to my motors?
This is about to get a lot more hits
I guess... shocking news
Awesome, thank you for the video!
Wow I’ll never buy a new motor again. All I need is a lathe lmao
Awesome video, thanks very much!
Hi Ipas Projects - can we connect via email?
Do you offer repairs for my motors?
On an expensive board like this! All this motors shit storm issue was on Low quality bearing, boosted seriously....
An excellent experience is to unmount the motor of a booosted V2 "the motor with a black shiny paint", comparing the Bearing beetwen the 2 motors
You said you are not a genius??
I say you wrong.
I have 2 motors that makes that noice. And 2 more on my boosted.
I wish you could fix them for me.
I would be willing to buy some of these if you sold them.
Hi. Do you accept money or money
I wish thet sold those shaft seperately
Great vid man
Can I please send you my two motors and pay you to do the same thing
No sorry. Cant do that. It is a very time consuming proces.
If I send my motors in. Can you put the 20teeth pulleys on mine I'll pay you!
Even though it looks easy in this video, making a shaft is pretty time consuming. So sorry I cant do this for you.
cool video ....too much work tho ....ill just buy another motor......
or just make the motor and we will all buy from you!
Listening to you. I can tell you are not from usa. ( loucky you)
But if you are. Can you help me fix my motors ?
There is a guy on IG who makes this.... @newyorkdiver
Or I can spend $100 for someone to do this for me. It’s gonna cost me thousands for any of those tools. Lathes aren’t cheap, but someone doing it for me and applying methods to prevent this (better materials) is. :D
Anyone in EU who could create me a new shaft and send it to Czech Republic ?
Step 1: have a machine shop
"you get what you pay for" -every sucker who shilled out over a grand for cheap crap and still swears by boosted
Please take my money
Hi, I have cash : )
Do you have an email adress?