EUROSTAR 3KVA POTENZA Online UPS
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- #ups #ups repairing
EUROSTAR 3KVA POTENZA Online UPS
Common searches...
ups repair
online ups repair
ups not powering on
how to work on ups control card
ups working principle
computer ups repairing
ups controller card repairing
uninterruptible power supply
ups board repair
block diagram and configuration of ups
potenza eurostar 3kva power supply repair
eurostar ups
eurostar potenza ups
eurostar 3 kva ups
power supply
power supply repair
#ups #upsrepairing #eurostar #akelectrotech #potenza #kva #powersupply
This person is an amazing master in his job. With his help, through online consultation, we repaired two 5KV UPS controller board with reprograming new BIOS. . Only after describing the problem, he immediately showed us the damaged part... Now both of UPS working like a new. Lots of thanks and recommendations from me.
Thanks a lot
Parabéns
Thanks
Sir app ki Video dahkh Kay Maza aa jata hay. Great information you provide us .
There are so many draw backs in video editing. Gradually I will clear them.
@@AKElectroTech G main nay app ko batya tha aik to camera change Karna pary ga. Or Jo bar bar autofocus hota hay .wo irritate karta hay .
Yes
I will improve
Hello
I got an APC SMT1500IC....the small board 640-3705-z-001_REV00 is burned. The bridge rectifier and the fuse is blown....also R762, R758, R759. Can you help me identify the resistors value if you got schematics for this board and device? thank you
Hello
kindly send pics of burnt components. at 923215717132 wattsapp
@@AKElectroTech i just sent you
thanks
Camta foucus out.
sir ji . i want to down load SW from ST72324 MCU which is used in APC BI850sine Inverter ..can u pls suggest how to do that . I have CH341A in my hand
Pl approach to your local Electronic market who is dealing with software.
Asalam sir apc1500 ma 50% load pa overload trip kr dyta hai,jab k led b 50% load pa full on ho jati hain
WAS
pl mention proper model no.
@@AKElectroTech APC 1500VA Smart ups
Without LCD
First of all calibrate software of UPS by applying Shift+p keys. If done then Ok.
otherwise check R27. If R27 is ok then check IC5 and associated components.
I hope you will find your solution.
@@AKElectroTech jazakAllah i will chk
I connected my ups APC1500 with pc ,when i checked the modle number from command its showing apc1000 😭 ,so its mean my ups front panel is replaced with 1500 ,but actually its 1000watt