For sure wanna see some more mod videos come out of this car. I love mine but need more ideas and tutorials for sure. First new car I’ve had in my life and I wanna turn heads
Thanks for sharing this videos, I didn't know how easy it would have been. Great job and car looks awesome. I wanted one so bad. I am still driving my 2015 Corolla S.
Thanks for sharing! Always thought the quick detailer leaves a wax/polish finish that would prevent the backout badges from sticking well. Could be wrong.
Wasn’t aware of that but it was pouring rain when we were gonna do it so washing it wasn’t an option. Perhaps a wax and grease remover could have been a better choice. Good call!
You are right John A. Whenever applying something with double sided tape, as these badges are applied with, you pre clean the surface with rubbing alcohol to get the wax off, Hopefully his badges stay on.
If i install these and decide to remove them after a couple of years just to switch back to the originals. Will it be a pain? Since I'm sure its strong adhesive. Wondering if I try to remove the adhesive and it ends up even taking off the original badges
No exhaust work yet. But I did put an intake on it recently (video soon-ish about that) and I have some more stuff that’s currently being manufactured. Just waiting for it to be done!
No I haven’t done anything with the front emblem. I don’t think you would want to cover it though since the sensor for the safety features is right behind it. You can get a replacement with the “C” Corolla emblem from Japan that’s a straight swap.
@@Joyrides ahh man that’s what I was thinking. Thanks. I was going to order for mine, but I just know my OCD would go mad crazy if all my emblems weren’t the same haha.
Following up, Premium Auto Styling does have a black overlay and according to their website they state that it doesn’t affect the automatic cruise control and safety sense sensor. I haven’t personally tried it though. It is a matte and gloss black overlay.
Hey man, I’ve got a 2020 SE HB with a MT and I haven’t been able to find a lot of resources for the SE model. Do you by chance know if the suspension parts are cross compatible? Do you know of any aftermarket companies making clutches for these? I drove my car from VA to Alaska and I definitely experiences clutch fade at higher RPM’s going up hills and up the ALCAN. Lastly, do you know of any reliable power mods or a forum where I can get more info for the SE models? I love your car man and I hope you have fun with it!
I removed my chrome one from the badge itself, so you think I could buy this and put the blackout badge on the emblem without the chrome one? Or should I glue it back on.
Do you know how to remove the ‘corolla’ badge lol. I planned on doing a little debadging to make it a lil cleaner. Removed my SE badge easily since I didn’t add the black badge (red looked cool) but impossible it seems
You’d need a heat gun, 30 lb. fishing line, plastic razor blade and some auto/paint safe solvent to remove the adhesive residue. AMMO NYC has a great video on debadging on either a metal or plastic surface on a GTR.
Go to the Toyota Parts website, put in the year/make/model for your Corolla and search "blackout" and it should come up with the part that you can order directly from their website or you can order them from the dealership. It's nice cause it's an official Toyota part.
@@Joyrides yeah but I miss my boosted 86. There was nothing more satisfying than beating haters with a "slow" car lol. I want to boost a hatch too. Toughest choice indeed
A boosted 86 would be a lot of fun. TBH it’s been between a GR86 or a GR Corolla. I happen to need the extra space at the moment but I’ve been tempted by an 86 a lot, especially after driving a Hakone.
the XSE badge looks like garbage because they didn't cut out the space between the letters. Just looks like a piece of black plastic. And the Toyota emblem looks bad because its black over black, mines well not even have the emblem on there. The black background should have been blue, then the emblem would pop better
Only saw 1 plastidip & 1 paint em comment. $5, maybe $10 if u want gloss, shop suggested. The product has evolved to where the finish is equal to oem paint or better with pro applications. Pro DYC shops like @ProDipper or of course DipYourCar with Fonzie. I see hideous DIYs dipped wheels often. It peels off luckily.
For sure wanna see some more mod videos come out of this car. I love mine but need more ideas and tutorials for sure. First new car I’ve had in my life and I wanna turn heads
We have a few things that are on the way. It’s going to be a bit since things have been delayed but I think we’ve got some cool stuff soon!
So first major mod is done! Post on our Instagram but a video is coming soon!
Congratulations on your first new car!👏🏾 I am with you, just got my first new car ever and looking for ideas☺️
Congratulations on your first new car!👏🏾 I am with you, just got my first new car ever and looking for ideas☺️
The blackout badges look friggin sick
I’m buying a used 2021 sedan in blue crush metallic, which is a little darker than that. I think the black badging will make it look a lot better.
Have same exact car. I guess I will do this . They should have had it on from factory. I love my car. Such a fun driver.
I agree. It looks way better with the black badges.
Thanks for sharing this videos, I didn't know how easy it would have been. Great job and car looks awesome. I wanted one so bad. I am still driving my 2015 Corolla S.
Thanks! It’s definitely not as hard as you might think.
Gotta get these for my two tone XSE.
looking forward to more Corolla stuff
Thanks for sharing! Always thought the quick detailer leaves a wax/polish finish that would prevent the backout badges from sticking well. Could be wrong.
Wasn’t aware of that but it was pouring rain when we were gonna do it so washing it wasn’t an option. Perhaps a wax and grease remover could have been a better choice. Good call!
You are right John A. Whenever applying something with double sided tape, as these badges are applied with, you pre clean the surface with rubbing alcohol to get the wax off, Hopefully his badges stay on.
You can just order these from the dealership??? What about the front emblem as well ??
Yep! They don’t do a front emblem blackout from the dealer but I think people have used vinyl to black out the front badge.
Hey DUde, i have the "Touring Sports" Corolla, is the Back Emblem the same Size? And were can i get the Black one?
I haven’t seen a specific badge set for a touring sport. I got mine from my Toyota dealership.
@@Joyrides OK thx
can you use everclear alcohol or would it hurt the paint job
If i install these and decide to remove them after a couple of years just to switch back to the originals. Will it be a pain? Since I'm sure its strong adhesive. Wondering if I try to remove the adhesive and it ends up even taking off the original badges
Can’t say for sure how much of a paint they will be but with some goo gone and wax and grease remover it should be doable
I don't own one, but i can for sure tell you that you can remove the whole emblem with it and put on a new one :)
Do you have exhaust work done on this beauty yet?
No exhaust work yet. But I did put an intake on it recently (video soon-ish about that) and I have some more stuff that’s currently being manufactured. Just waiting for it to be done!
I'm now looking forward to move videos don't leave me hanging!
We’ve had a shelter in place mandate for a bit now or we would be out shooting more videos. We’ll have more to come for sure!
@@Joyrides Arizona just got put on lockdown this week so I understand!
Mine came with the blackout badges. It’s black too. S T E A L T H M O D E
Have you done the front emblem? Is it the same process as the rear ones?
No I haven’t done anything with the front emblem. I don’t think you would want to cover it though since the sensor for the safety features is right behind it. You can get a replacement with the “C” Corolla emblem from Japan that’s a straight swap.
@@Joyrides ahh man that’s what I was thinking. Thanks. I was going to order for mine, but I just know my OCD would go mad crazy if all my emblems weren’t the same haha.
Following up, Premium Auto Styling does have a black overlay and according to their website they state that it doesn’t affect the automatic cruise control and safety sense sensor. I haven’t personally tried it though. It is a matte and gloss black overlay.
@@Joyrides thanks! I’ll definitely look into it.
Hey man, I’ve got a 2020 SE HB with a MT and I haven’t been able to find a lot of resources for the SE model. Do you by chance know if the suspension parts are cross compatible? Do you know of any aftermarket companies making clutches for these? I drove my car from VA to Alaska and I definitely experiences clutch fade at higher RPM’s going up hills and up the ALCAN. Lastly, do you know of any reliable power mods or a forum where I can get more info for the SE models? I love your car man and I hope you have fun with it!
Where’s the link?
I removed my chrome one from the badge itself, so you think I could buy this and put the blackout badge on the emblem without the chrome one? Or should I glue it back on.
You would probably need to put the original badge back on. These are caps that stick on over the top of the original badge.
@@Joyrides already bought adhesive last night! glueing it back on, teq badges weren’t my thing.
nothing stays stock for long 😅😅😅
wondering what I should do first to my car 👍
Have a video coming soon of a new intake install and some extra stuff coming in the next week that I’ll have to install and shoot some videos for.
Question how long do they stay on, and when you wash your car does it come off?
They have an adhesive backing that sticks to the original emblems. I’ve had them on for a while now and haven’t lifted or come off at all.
Do you know how to remove the ‘corolla’ badge lol. I planned on doing a little debadging to make it a lil cleaner. Removed my SE badge easily since I didn’t add the black badge (red looked cool) but impossible it seems
You’d need a heat gun, 30 lb. fishing line, plastic razor blade and some auto/paint safe solvent to remove the adhesive residue. AMMO NYC has a great video on debadging on either a metal or plastic surface on a GTR.
What is the Part number?
Hey could I get the link for the black badges
Go to the Toyota Parts website, put in the year/make/model for your Corolla and search "blackout" and it should come up with the part that you can order directly from their website or you can order them from the dealership. It's nice cause it's an official Toyota part.
Beautiful car! I want one so bad. This or the gr86 coming out
Supposedly there is a GR Corolla hatchback coming soon too.
@@Joyrides yeah but I miss my boosted 86. There was nothing more satisfying than beating haters with a "slow" car lol. I want to boost a hatch too. Toughest choice indeed
A boosted 86 would be a lot of fun. TBH it’s been between a GR86 or a GR Corolla. I happen to need the extra space at the moment but I’ve been tempted by an 86 a lot, especially after driving a Hakone.
That, is looking choiceee!!!
Thanks! It’s already weird looking at pictures and video from before the badges.
You have a Bobby Duke vibe 🤣
Where I can buy one of these ? To be send in Europe.
I’m not sure if there is a TRD UK store online. Dealership might be able to help you with that.
And how much you paid it?
Sir?
@@hudikadino4886 I think they are about $130 here in the US
Thanks, too much for me :(
Looks good
Thanks!
Awesome 🔥👍🏽 👊🏾
Just what I was looking for thanks
Well I just ordered them 😂
I love them on my car
the XSE badge looks like garbage because they didn't cut out the space between the letters. Just looks like a piece of black plastic. And the Toyota emblem looks bad because its black over black, mines well not even have the emblem on there. The black background should have been blue, then the emblem would pop better
The XSE badge cover looks like a blob
A really cool blob
you shouldve just painted the ones on the car
May end up trying that if I order an extra set of badges. Not going to paint the ones that came with the car.
I'll just plastidip my emblems 😐
Only saw 1 plastidip & 1 paint em comment. $5, maybe $10 if u want gloss, shop suggested. The product has evolved to where the finish is equal to oem paint or better with pro applications. Pro DYC shops like @ProDipper or of course DipYourCar with Fonzie. I see hideous DIYs dipped wheels often. It peels off luckily.
I don't know why you guys like to blackout, but the original color looks much better. Blackout makes it look so cheap
looking forward to more Corolla stuff