This takes me back to the comment you raised about PCBs being filled with silicone. I think it would be great if they filled the stoves PCBs with the same thing. These boards are sensitive to foreign objects. Your channel is informative. Thanks again.
Very true my brother they should just do that. Thanks a lot, its heart warming to know that I am helping. Bible says there is more happiness in giving than there is in receiving.
I have the same stove an currently it switches off on it own with error 22 sometimes and i cant burn two hops sametime i use one at a time And also i have obsave that the problem is the two cabs under on board that doesn't hold enough voltage im going to have them replace month end hope that solve my problem
@@appliancetech001 😭😭😭😭i just open it now coz it giving me error 22 all the time i just realize that there are two bords solded togeter ontop of onother it impossible 🤦♂🤦♂🤦♂🤦♂🤦♂🤦♂
@@nkosenhlekumalo I am sorry my brother, I was afraid to tell you its better to replace a board with these stoves. I hope you were not charged for that cap replacement.
For a 6pin you need a hob that take four wires like a solid plate. Since these one take only neutral and live only, the regulator is the one to go for.
Hi again, my regulator switch is working vice-versa, my no.1 is hot and number no.6 is low,but the wires are plug in as it should be, (phase=supply voltage),(load=+ from burner),(N=N from burner ),& p=pilot light...🤔
This takes me back to the comment you raised about PCBs being filled with silicone. I think it would be great if they filled the stoves PCBs with the same thing. These boards are sensitive to foreign objects. Your channel is informative. Thanks again.
Very true my brother they should just do that. Thanks a lot, its heart warming to know that I am helping. Bible says there is more happiness in giving than there is in receiving.
well emzukwaneni is also my channel so i have responded😉
I have the same stove the problem is that when I switch the the power two burner make it's self on automatically what could be the problem
@alfredlesia-nc6qp It is the PC board.
I have the same stove an currently it switches off on it own with error 22 sometimes and i cant burn two hops sametime i use one at a time
And also i have obsave that the problem is the two cabs under on board that doesn't hold enough voltage im going to have them replace month end hope that solve my problem
@@nkosenhlekumalo I just hope it comes right because buying a board can be expensive than that
@@appliancetech001 😭😭😭😭i just open it now coz it giving me error 22 all the time i just realize that there are two bords solded togeter ontop of onother it impossible 🤦♂🤦♂🤦♂🤦♂🤦♂🤦♂
@@nkosenhlekumalo I am sorry my brother, I was afraid to tell you its better to replace a board with these stoves. I hope you were not charged for that cap replacement.
Is it possible that you can connect a 6 pin selector switch to the ceramic stove type plates or can you only use the regulator type switches
For a 6pin you need a hob that take four wires like a solid plate. Since these one take only neutral and live only, the regulator is the one to go for.
@@appliancetech001 thanks
How to test switchs
Hi again, my regulator switch is working vice-versa, my no.1 is hot and number no.6 is low,but the wires are plug in as it should be, (phase=supply voltage),(load=+ from burner),(N=N from burner ),& p=pilot light...🤔
Did you try to swap live and neutral on the hob?
@@appliancetech001 No.. not yet,I'll try it and let you know...
I have a similar situation with a Bosch. Looks like I have to get a new one also
Interesting i need a pc board where can i get it
Try lategan and van biljoens, myz appliances and tecsareco.
Where are you located... I need to buy that Control board frm u
I am in Newcastle, please send a whatsapp so I can help
How much😊