G’day Gordy great ideas I have these filters on my 462 early ones work great 👍 I saw you testing out the new Husqvarna 592xp when you teamed up with Anton . I also own the new Husqvarna 592 xp been running that saw for 3 months the factory filter on these saws are shit getting a lot Saw dust getting through into carburettor. I would love to see you design same thing for 592xp. Love your products they make a big improvement on all my saws will always be purchasing from you keep up the good work👍.
Great job guys! I’m running this in my 400 and 500 stihls daily (with bark boxes and WSC dogs of course). I’m a huge fan and appreciate that your stuff is designed SMART! A few fellas here run the Jason Eagon SHOT and it seems nice but I find those HEAVY (yours seems a nicer design IMO). When possible I’m on the 400 with a 25 bar and with your upgraded kit I’m able to do just about everything up to two feet in diameter to limbing as long as it’s not old growth hard woods (for the the 500 is my go to). All the best from North Idaho!
Ordered the whole kit for my 400cm. Sounds super good and crisp but I had a HELL of a time getting the filter to stay on the housing. As soon as I tightened the hose clamp at all the clamp or the filter would pop off the housing. I took a scotch bright pad to all the surfaces that touch and cleaned the edges with carb cleaner and it seemed to stay.
I had the older style from red beard. Loved it, but It did separate on me. I’m sure because I was washing it out with gas. I’ve switched to the 3” uni and I use foam filter cleaner now. Works well on my 372’s
I found out what I was asking you.the 661 I bought used ,the person was running a 500i uni filter on the stock carb mount .he did not have stack or set up properly, also the new 500i filters I got ae great . Thanks
Are the filters for 500i on the westcoast website the new design? The pictures on the site don't have the polyurethane ring on them. Redbeard saw is out of stock on them and I need some. Thanks
Hey Gordy I see you have a new filter for the Husky 572xp, are there measurable gains here or is it just a different system? Thanks! Looking for better performance!!
I just put one of these foam filters on my 462. Its a pretty new saw, maybe 60 hours on it. Got a conventional tuneable carb, not the m tronic. I live and cut timber at about 8000 ft, and I am interested in learning how to retune my carb settings.. so far it bogs down when cutting, feels weak; low rpm at full throttle. Should I richen or lean the H ?
Sweet. Thanks Gordy! I’ll get on over to your site and get one ordered. The 2 piece design always had me a little concerned, but if you can soak it in gas for days and it holds up I’ll give her a shot
![[UNCUT] ฝันรักห้วงนิทรา | EP.9 (3/4)](http://i.ytimg.com/vi/ikd1tEhXbp8/mqdefault.jpg)
Man I wish I could put a bark box on my 032! Thanks for all the amazing work! Looking forward to a new filter!
Nice work Gordy !!
Right on Gordy, love where you're going with the parts and better options development pard! Clearly your mind is never at idle 🤣
Mine is sitting on the counter as we speak! Great product Gordy! I used to run Uni filters on my CR500
Just picked up my 500i,…… GONNA NEED YOU GUYS. USMC-VFW🇺🇸 35+ cut / fell man.
Love those 462,filters
G’day Gordy great ideas I have these filters on my 462 early ones work great 👍
I saw you testing out the new Husqvarna 592xp when you teamed up with Anton .
I also own the new Husqvarna 592 xp been running that saw for 3 months the factory filter on these saws are shit getting a lot
Saw dust getting through into carburettor.
I would love to see you design same thing for 592xp.
Love your products they make a big improvement on all my saws will always be purchasing from you keep up the good work👍.
Great job guys! I’m running this in my 400 and 500 stihls daily (with bark boxes and WSC dogs of course). I’m a huge fan and appreciate that your stuff is designed SMART! A few fellas here run the Jason Eagon SHOT and it seems nice but I find those HEAVY (yours seems a nicer design IMO). When possible I’m on the 400 with a 25 bar and with your upgraded kit I’m able to do just about everything up to two feet in diameter to limbing as long as it’s not old growth hard woods (for the the 500 is my go to). All the best from North Idaho!
Ordered the whole kit for my 400cm. Sounds super good and crisp but I had a HELL of a time getting the filter to stay on the housing. As soon as I tightened the hose clamp at all the clamp or the filter would pop off the housing. I took a scotch bright pad to all the surfaces that touch and cleaned the edges with carb cleaner and it seemed to stay.
Just got mine for the 462, thanks man!
It's going to be one of my Christmas gifts to myself!!😂 Love my 462cm by the way! Have Gordy's Bark box & 3 point dawgs,awesome stuff!!
Awesome!
I had the older style from red beard. Loved it, but It did separate on me. I’m sure because I was washing it out with gas. I’ve switched to the 3” uni and I use foam filter cleaner now. Works well on my 372’s
Wish someone made a low pro square filter like this that fit under the 372 slant back cover
I found out what I was asking you.the 661 I bought used ,the person was running a 500i uni filter on the stock carb mount .he did not have stack or set up properly, also the new 500i filters I got ae great . Thanks
Just ordered one for my 362c
I wish I could run these foamies but I have pretty much only stihl "0" series saws. Those WCS dogs are on every saw I have though.
Need one for my 200t hotsaw. When are y'all gonna make some for those
For the 500i wcs filter or maxflow filter
Any ideas beside the bark box / cloth cover / cold weather bark handle & im a lefty?? IM SORRY😅 any ideas,…. I’ll be $$$ ordering up🇺🇸
Are the filters for 500i on the westcoast website the new design? The pictures on the site don't have the polyurethane ring on them. Redbeard saw is out of stock on them and I need some. Thanks
will the 500i filter setup change as well?
How often should you clean them?
Do you make these for any of the huskys?
Any plans on a 661 filter? or just go with a maxflow.
I have a MS441 C-M. Would you recommend this or the Max flow system? Thanks.
G'day Gordy do you ship to Australia?
Hey Gordy I see you have a new filter for the Husky 572xp, are there measurable gains here or is it just a different system? Thanks! Looking for better performance!!
I just put one of these foam filters on my 462. Its a pretty new saw, maybe 60 hours on it. Got a conventional tuneable carb, not the m tronic. I live and cut timber at about 8000 ft, and I am interested in learning how to retune my carb settings.. so far it bogs down when cutting, feels weak; low rpm at full throttle. Should I richen or lean the H ?
Found your carb tuning by ear video, think I got it sorted out. Thank you very much for your quality products and informative content!!
If I order one today will I receive this new version, or will you be clearing out the old stock first?
You’ll receive the newest version
Sweet. Thanks Gordy! I’ll get on over to your site and get one ordered. The 2 piece design always had me a little concerned, but if you can soak it in gas for days and it holds up I’ll give her a shot
Do you guys ship to the U.K?, I just got a 462cm, and looking to pimp up my saw a little 🤘
For sure, get his bark box & 3 point dawgs!! & filter while your at it.😊
I ordered the new filter Thursday so I’ll have all 3, looking forward to new filter.
For 85 bucks canadian plus 25 bucks shipping its just not worth the money. If they get cheaper ill buy one
Holy shit is Canadian stuff expensive!!! $45+ for a case of back throat coolers🤑