I just got this impact wrench yesterday from Home Depot for automotive work, and I’m really looking forward to using it soon. I wish Ryobi and Ridgid would have kept the tri beam lights.
@@ManCaverTools I actually changed my mind after writing this comment. I decided to go with the Ridgid mid torque instead. It’s more comfortable in my hand, has plenty of power and it’s less expensive than the Milwaukee. The LSA also makes it a great choice for me.
The hollow rectangle steel beam was giving or compressing when torqued so you didn't quite put as much torque to those nuts as you might think. Better test is to use a solid steel bar and bolt down the nuts with that 1800 ft-lb wrench.
@@panchovilla3493 I picked it up for $168.43 bare tool, with buy more save more when paired with the rear handle saw, return the saw and keep the impact!
You talking the 2 in 1 impact? I work in substation construction/maintenance and my foreman had one of those Bosch. We tried it out on an outage job and they were more than satisfied with the performance. It can usually be picked up on sale around the holidays also.
@@ManCaverTools am I missing something? I thought that was the whole point of a torque wrench? To finish off torqueing a fastener to a specific ft lb like lug nuts
If you had to choose only 1 Milwaukee impact wrench: Choice is between the 3/8” 2960 or the 1/2” 2962 for a DIY with passenger cars and small truck…What would you choose?
@@No_bread-and-circuses I went with the 1/2”. It takes off the wheel nuts in seconds and saves so much time. I’ve also used it for other things, but I’m glad I got the 1/2”
There are some people trying to take your videos and use them as their own. They make them about 4 minutes and put terrible music on them. They are trying to pass your videos are theirs. They are completely copy writing your videos. I hope that you will be able to find the Chanel's that are doing this. I have been reporting their videos and hopefully they get banned.
@@ManCaverTools the torque multiplier will work if u have a torque wrench that will torque to lets say 200 ft lbs a torque multiplier will multiply the torque by 4 times so you put the torque multiplier on the bolt then put the torque wrench on the multiplier and tighten to 200 ft lbs and that will in turn make the bolt tightened to 800ft lbs
I need that certain tool because it can tighten nuts up to 700ft lbs accurately and effortlessly in seconds and if im loosening them up all the time getting something to 700 ft lbs in a single car garage with a hand tool is hard
I’d like to know what the torque readings are using the small batteries I know everyone wants to see it with the big batteries but I’d like to see what they might be using smaller lighter compact batteries
@@adambomb9452 Yea , 400 ft.lbs of nut busting and 250 ft.lbs of tightening , from a 12v impact wrench and new oil resistance 3.0ah & 5.0ah batteries , Now What ....
You would be better off getting a skid more and wilhelm, with regular And reverse thread pitch. you can compare impact wrenches, up to 1500 ft lbs, and it would be slightly less expensive than the hytorq gun. The hytorq is limited to 700 ft lbs. meaning you can’t test high torque impacts.
Holy Moley ! That 12 Ahr battery is larger than the tool! Great for the video, but I don't think that is going to be very practical for daily use. At least not automotive.
Funny how milwaukee always comes out with these updated and more powerful tools while dewalt only does it when they're tired of getting people asking for newer ones
I've been meaning to ask this for a while now, but what's going on with your mic whenever you do an impact vid? I don't mind it, I'm just curious as to what's going on that makes it cut out when you run the impact nearby. Thanks for the vid!
@ that intro i also tell my 1/2 Wrench I love you so much.then i kiss the box after.,and then get random chores from my wife after she catches me with my new tools. ----> I rightly assume you weren't telling your wife you love her so much then kiss her, because that would be awkward on a Tool video. :D
![JUST RELEASED! Milwaukee Gen 2 M18 FUEL Mid Torque Impact Review [2960 & 2962]](http://i.ytimg.com/vi/f-tSi-Gq5Qk/mqdefault.jpg)
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
I just got this impact wrench yesterday from Home Depot for automotive work, and I’m really looking forward to using it soon.
I wish Ryobi and Ridgid would have kept the tri beam lights.
this impact wreck is amazing and you will be happy with it
@@ManCaverTools I actually changed my mind after writing this comment.
I decided to go with the Ridgid mid torque instead. It’s more comfortable in my hand, has plenty of power and it’s less expensive than the Milwaukee. The LSA also makes it a great choice for me.
The hollow rectangle steel beam was giving or compressing when torqued so you didn't quite put as much torque to those nuts as you might think. Better test is to use a solid steel bar and bolt down the nuts with that 1800 ft-lb wrench.
Great channel. A lot of useful things. Hello to you guys.
I thank you Mr Milwaukee
"you gonna put up my plants" nah step off you're eating into my leisure time woman!!!
lol
This tool is a beast and I love it! Well worth the money!
Tool only is 230ish right now at HD??? GOOD PRICE??
?
@@panchovilla3493 I picked it up for $168.43 bare tool, with buy more save more when paired with the rear handle saw, return the saw and keep the impact!
I agree with you on that one
FYI, using deep well sockets will allow the impacts to perform to their maximum ability.
I will do a video on that one
Bad ass little gun
Nice video. Like to see up against the Makita XWT17Z.
that video will be coming up soon and I thank you zman
Hey, get the bosch impact driver/wrench. A BEAST of a tool.
yes sir and I thank you for viewing Eyal
You talking the 2 in 1 impact? I work in substation construction/maintenance and my foreman had one of those Bosch. We tried it out on an outage job and they were more than satisfied with the performance. It can usually be picked up on sale around the holidays also.
Weheey, red ryobi does pretty well!
indeed it does and I thank you for viewing Kvern
You can get a 1in drive 200-1000 ft lb torque wrench for 1k~ his torque gun is also limited to like 600or 700 ft lb
I have that but I want to be able to it accurately to the ft lbs
@@ManCaverTools am I missing something? I thought that was the whole point of a torque wrench? To finish off torqueing a fastener to a specific ft lb like lug nuts
Using a torque multiplier ($150-300) and a torque wrench you can accurately put those bolts to 800 ft lbs of torque. Don't need the $4000 tool.
I will look into that and I thank you for the suggestion Tony's
Awesome video Dave
I thank you Makita
If you had to choose only 1 Milwaukee impact wrench: Choice is between the 3/8” 2960 or the 1/2” 2962 for a DIY with passenger cars and small truck…What would you choose?
@@No_bread-and-circuses I went with the 1/2”. It takes off the wheel nuts in seconds and saves so much time. I’ve also used it for other things, but I’m glad I got the 1/2”
There are some people trying to take your videos and use them as their own. They make them about 4 minutes and put terrible music on them. They are trying to pass your videos are theirs. They are completely copy writing your videos. I hope that you will be able to find the Chanel's that are doing this. I have been reporting their videos and hopefully they get banned.
yes they are and have been doing it for years lol but I thank you Sawyer
Good on the lag bolt testing. I run 1/2 lags all day with the mid-torque. Would be nice to try testing some self tapping concrete anchors too.
I run these tests all the time and they put a major strain on the motor
Got the tool getting the bat
I have the ridgid brushless 1/2" with similar specs and it is a beast. Puts my grandpad older pneumatic ingersol rand to shame.
tools these days are powerful
The Ridgid has slightly higher rpm, but the trigger control and auto mode are better on the Milwaukee.
I like your videos. My boy noticed the among us figure on your cabinet, he wants one, he plays among us all the time 😆
I thank you Double :)
can you add 3/4 inch lag screws for the log obviously i feel like the sizes your using isn't very challenging what are you using 1/2 inch
once I can find that size yes, and it would be good it I can get a 1" as well
@mancavertools Get a torque multiplier you can do it with that cheaper
yes but I need to set these to 700ft from time to time as well
@@ManCaverTools the torque multiplier will work if u have a torque wrench that will torque to lets say 200 ft lbs a torque multiplier will multiply the torque by 4 times so you put the torque multiplier on the bolt then put the torque wrench on the multiplier and tighten to 200 ft lbs and that will in turn make the bolt tightened to 800ft lbs
@@ManCaverTools let me no if you understand what im saying
Yeah Milwaukee has a lot of power
yes they do and I thank you for viewing Agustin
Why can’t you just buy a normal torque wrench? Why on earth would you need one in the range of 5k?
Yeah! Unless he is getting a sponsor deal or steep discount it is not worth it imo. But hey, it is what it is.
I need that certain tool because it can tighten nuts up to 700ft lbs accurately and effortlessly in seconds and if im loosening them up all the time getting something to 700 ft lbs in a single car garage with a hand tool is hard
I’d like to know what the torque readings are using the small batteries I know everyone wants to see it with the big batteries but I’d like to see what they might be using smaller lighter compact batteries
more test will be coming up. I want to know myself as well
I would never use that impact wrench in my lifetime. But , I can't wait for the New DeWalt 12v Xtreme impact wrenches to come out .... 👍
deFault? lol
@@adambomb9452 Yea , 400 ft.lbs of nut busting and 250 ft.lbs of tightening , from a 12v impact wrench and new oil resistance 3.0ah & 5.0ah batteries , Now What ....
@@brianf9619 did you mean in-lbs or ft-lbs?
@@ezrawaters6653 Oops , ft.lbs ...
@@brianf9619 I personally own all Milwaukee, but I’m hyped for that new Dewalt
Where is the video of hilti impact wrench vs milwaukee mid size impact wrench? How about a test on the best midsized impact wrench
You would be better off getting a skid more and wilhelm, with regular And reverse thread pitch.
you can compare impact wrenches, up
to 1500 ft lbs, and it would be slightly less expensive than the hytorq gun.
The hytorq is limited to 700 ft lbs. meaning you can’t test high torque impacts.
ill look into that and I thank you Juan
Professional!!!
Holy Moley ! That 12 Ahr battery is larger than the tool! Great for the video, but I don't think that is going to be very practical for daily use. At least not automotive.
I thank you for viewing Stefan and it is a big one
Im happy with my gen1!
I do thank you so much for viewing :)
Is it easy to swap anvils on this impact?
Funny how milwaukee always comes out with these updated and more powerful tools while dewalt only does it when they're tired of getting people asking for newer ones
Seems dewalt changes the name and the battery colors around calls it somthing new
Dewalt needs to step up their game but at the same time, Milwuakee needs to stop updating tools 6 months after they released a new tool
@@ManCaverTools true. The Apple IPhone of the tool world 😆.
I've been meaning to ask this for a while now, but what's going on with your mic whenever you do an impact vid? I don't mind it, I'm just curious as to what's going on that makes it cut out when you run the impact nearby. Thanks for the vid!
Mics can't handle the noise. Many people turn them down or mute them when shooting during loud noises
my mic is inches away from these tools and sometimes they flip out on me
Now did I say it like that? I said it only with love!!!
you are the man mr bates and love you bro
Love you too my brother
Hey wats up MCT! are you going to get Ryobi P262 1/2 impact wrench anytime soon? I would like for you to test it out and see what you think of it
I already got it and a video will be uploaded soon
Tekton make 1/2 drive all the way to 38mm
Thanks need some impact sockets and am going to buy those
@@someonesomeone272 give they you$1 for every $10 and $10 for every $100
I will be gettin that and thank you Daniel
Can you take off nuts and bolts 🔩 off scooter let me know thanks
😆🍩☕😊
thank you Konaman
@ that intro
i also tell my 1/2 Wrench I love you so much.then i kiss the box after.,and then get random chores from my wife after she catches me with my new tools.
----> I rightly assume you weren't telling your wife you love her so much then kiss her, because that would be awkward on a Tool video.
:D
lol, I thank you for viewing k96
I have found a channel that is stealing yours and others videos about tools, his channel name is ''Turayev Zukhriddin''
it is happening quite a bit for many years but that you
Hi
whats up Pirate
@@ManCaverTools love the videos. Keep up the great work.
First
I thank you Cody
Only makita can beat this one
I will have to get that makita
this is really a crude tool!!!
yes it is lol
How marny milwaukee 2962
A waste of money it's only 8% more powerful than gen 1 if you're going to make a new tool it better be 25% more powerful minimum
I agree with you on that one Lou