JUNKYARD ACTION! NEW MILWAUKEE TOOL MID TORQUE IMPACT WRENCH'S 2960-20 vs 2962-20
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- PetrolBox www.mypetrolbox.com use code "Wrenchon" for an amazing Discount.
M18 FUEL™ 3/8 Fuel Mid Torque 2960-22 -bit.ly/3be7ppX
M18 FUEL™ 1/2 Mid-Torque Impact Wrench w/ Friction Ring Kit 2962.22- bit.ly/12MidTorque
M18 FUEL™ 3/8" Mid-Torque Impact Wrench w/ Friction Ring Kit delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft-lbs of nut-busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This MILWAUKEE® 3/8" Impact Wrench is the most compact in its class, giving you access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers you full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The included two M18™ REDLITHIUM™ 5.0 batteries fit all M18™ tools, delivering more work per charge and more work over the life of the pack.
➥ Blake's Garage T-Shirts: www.wrenchon.com
Car Detailing Products I use:
➥Chemical Guys EcoSmart-RU geni.us/cYA0j1Q [Amazon]
➥Chemical Guy Hybrid V7 Optical High Gloss Spray geni.us/b6oOz9r [Amazon]
➥Chemical Guys Diablo Gel Wheel and Rim Cleaner geni.us/mveVJiC [Amazon]
➥CarPro Reload Sealant Spray geni.us/aPAked [Amazon]
➥CarPro PERL Coat Plastic & Rubber geni.us/kJJC7 [Amazon]
➥Durafoam Contoured Large Tire Dressing Applicator geni.us/ael99K [Amazon]
➥Chemical Guys Lava Luminous Glow Infusion WAX geni.us/zgbvI5S [Amazon]
➥Chemical Guys Light Duty Clay Bar and Luber Synthetic Lubricant Kit
geni.us/wBQcygf [Amazon]
Camera Gear I use:
➥ Canon EOS R Full Frame Camera RF 24-105mm F/4L Kit- geni.us/AXKlhr [Amazon]
➥ Rode Video Mic Go- geni.us/PzaQOv [Amazon]
➥ Rode VideoMic Pro- Plus geni.us/Nd573D [Amazon]
➥ JOBY GorillaPod 5K Kit- geni.us/Bijy [Amazon]
➥GoPro HERO8 Black- geni.us/SdzN8 [Amazon]
➥ Manfrotto 502 video head here- geni.us/Be7l [Amazon]
➥ Zoom H1 Handy Portable Digital Recorder- geni.us/bISj [Amazon]
➥ Lapel Mic HUACAM YYPJ-01-1 for exhaust clips- geni.us/hJHwM [Amazon]
➥ ProMaster XC525 Red Tripod With Head- geni.us/BGBEpp [Amazon]
*Awesome impact **MyBest.Tools** Takes tires off in a second. Plenty of power for what I’ve used it for - rotating tires. Using it on 3rd setting for removal and 2nd setting for tightening lugs.*
Did you guys enjoy the junkyard footage? If so maybe I'll do more scavenging videos.
Cool way to test out the impacts I think.
Love it, I'm living vicariously through you right now since my yard is closed here! I don't even have an E30 yet but I've got my shopping list for 24V swap parts and your vids have been a huge help! Let me know if you ever need some Euro stuff, there's tons of E36s here.
@@skyway88 oh dang okay will do. I am looking for the headlight leveling setup for the Bosch euro lights
@@BlakesGarage I got you, I'll DM you on IG
@@skyway88 nice 👍🏼
I would say skip the compact m18 altogether as the stubby imo is nicer for tight spaces due to the fact you can use the smaller m12 batteries. The m18 compact uses the m18 batters which makes the tool kinda chunky and if you are going to go that route may as well go to the m18 mid torque as the size is almost damn near the same to the compact but with more torque. My line up would be the m18 high torque, m18 mid torque and m12 stubby.
Thanks for making this! As someone that’s only done bolt-on exhaust mods in the past this was very nice to watch and learn and I appreciate how clear you are at explaining things 😀
Thanks I appreciate it and glad I could help out 👍🏻👍🏻
I love mine. Took apart the whole front end (fenders, hood, bumper, uca, lca, sways, etc) and pulled the engine/trans and drive shaft with the use of the m12 stubby (3/8) and m18 mid torque (1/2) on a olds 442 that had been sitting for years. Super curious how the new dewalt extreme will compare with the Milwaukee stuff. Can’t go wrong with Milwaukee.
Deciding between stubby and high torque versus just mid torque concerned about junkyard Rusty axle nuts and suspension is mid powerful enough unless of course I'm doing some Honda crankshaft not planning it though. Ty
I like the 3/8 stubby, but man, that M12 will do the job! 1/2 M12 and 3/8 M12...I really wanna know how the 1/4 would do
I use the 1/4 impact driver (2853) to remove lug nuts on my Sequoia so I know it will work under the hood on the smaller stuff. I am waiting to see what Fathers day sale HD will have on the 1/2 Mid torque wrench. There were no deals on Memorial day. Either way, I will be purchasing it.
@@Methodical2 milwaukee is, in my mind, the best you can get. Flex is cool and all, but milwaukee is where I'm at
Had the M18 half inch about two weeks my buddy borrowed it impacting the wrong direction on a lug nut broke the gears in it you can't stay on these guns if they don't loosen right away
Just bought the 3/8 mid torque i use it for lug nuts and car work. Not a licensed mechanic just D.I.Y. Also have the adapter to go from 3/8 to 1/2
This is a fabulous video and explanation! A real Milwaukee owner!
Thanks glad you enjoyed
got them and love all my milwaukee tools.they still wont replace my Mac 1/2" air impact or even my IR 3/8" impact.do i use my electrics more,you bet and love them!I do still run into plenty of times i have to get the big guns out though.i am a professional tech though and work on this stuff all day long in the Midwest.they still cant beat air tools....yet!
Good video, my go to is my 3/8 stubby. I use it for everything. I have the first gen mid torque and it only comes out when I need more power. Worst case I pull out the high torque if it’s needed.
I love midtorque Milwaukee so much, event I don't have that beast yet. 😊😊
I have the 2860-20 for sale if interested
Been thinking of buying this for my dad. Uses a compressor that's older than me.
Only thing about the light's like that is a big socket covers them
I just picked up the 1/2 mid torque. Hopefully it's enough for most jobs where I don't have to drag around a hose. And when that comes I'll pull out the 1 inch air gun lol.
I think you’ll be pleasantly surprised 😲
You sold me on Milwaukee when I etch you in the junkyard taking parts off.
Whats the price on the 1/2 kit i live in the uk
This guy pulls up to the pick and pull in a gorgeous Porshe but a VW rabbit gets his attention lol, that’s why I love this channel
Thanks👍🏻👍🏻 I need to do another one of these junkyard reviews.
@@BlakesGarage yes please do
I love how you have a stuby.with the step down and that makes the stuby longer then the then the standard, haha
Haha true I need a 3/8 one also
Hello nice Milwaukee tools Where can I get a case for a 2962-20?
How do I require one of your battery charger sir? I’m new to the system and in need of a charger, please?
would love a case for my high torque impact 2967 haha
Great video man! Used milwaukee impacts for years now, just got the 3/8 mid torque, adapting the 3/8 did compromise its performance thought, straight socket the removal times would definitely drop.
Never own any tool but trying to get some so should do 1/8 or 1/2 ones
I’d do 3/8 I tend to use that way more than 1/2
I'm happy to buy your extra chargers and boxes
A year later I’m seeing this, do you still have a crate full of chargers lol
Nah sent them all out already
What a nice shop bro! Agreed right tool for the right job. Don't watch me hammer away with the ratchet though...
That's what I'm talking about. You took the tool to the junkyard for some real world auto use testing on bolts that's been in the elements for who knows how long. These tools are perfect for the junk yard hunt. "...some broken windows because they are dicks..." My sentiments exactly. Damaging good usable stuff for no reason.
Straight savage on that beamer hood. Loved it.
Thanks
2967 IS THE KING
Great video with some real world usage! Looking to grab one of these Gen 2 impacts but undecided on going 3/8 or 1/2. Since using both, what are you finding more versatile if you had to pick just one?
I'd decided based on the size sockets you use? They are both the same size.
If you have any spare m18 chargers I'll take one, about to get my first ever impact wrench
Dude the 3/8" has shorter sockets up to an 1" shorter than the 1/2" nut buster 2962. Same design, thus buy 3/8"!!!!!
Great to know. That makes me think more about the 3/8.
@@Methodical2 Don't trust me, research it on the popular Impact Wrench channel. It's a no brainer.
De tanto, ya no supimos de tres maquinas de impacto que rollo y cual es la efectiva
If you don’t have an air compressor how do something simple like air up your tire on your truck? I agree with Milwaukee love em have this tool kit both the old one and the knew one like here in this video BUT can’t ditch the compressor completely man.
Edit: loved the video really good testing of the equipment and I like the junk yard stuff
I use the Milwaukee Milwaukee M12 portable inflator Thing works amazing it even stops at a certain psi you want to set. It’s my absolute favorite little pump for the race track. Thanks I’ll definitely have to do some more junkyard reviews I think it’s super fun.
I agree. I won't be discarding the 'ole air compressor. Besides, I still need to spray my car. But, the portable units definitely have their place.
5 yrs later still waiting on next gen high TQ 1/2 and 3/4 impact damn shame
You took off parts so fast with the Milwaukee!
Any opinion on best aluminum sheer cutter? On a budget. Since probably only 1-2 times use.
amzn.to/3dm33A3
Blake another great video man. Are you going to get rid of the cases the impacts came in?
Yeah you want them?
Amazing video man. I love these pick and pull videos 👍🏼
You didn't take those clean brake rotors?
Watching this from the 209.. at Stockton is my go to junkyard.. great video. I recently sold my m12 stubby wanting to upgrade to the m18. This video help.
Be careful in Stockton pick in pull, no security , no cameras, and there’s always people stealing there
Oh yeah place is sketchy for sure 😂
Blake. Liked the review a lot! Hey I could use a charger. I just got into the Milwaukee line.
DM me on Instagram @blakesgarage
Hey bro you got an extra charger and great video I'm a milwaukee dude too
Hey can i have one of the milwaukee charger
Hello, great video . I could use a charger
These Adapters work fine
But these tool break them like insane we got hex but we bought later 1/2"
If you're talking about a 1/4 inch hex to 3/8 or 1/2 yeah that's an impact drive not an impact wrench. Impact wrenches like these put out way more torque than impact drivers so I'm glad you got the right tool for the job now 👍👍👍👍
Does M18 1/2" impact wrench gen 3 come in 250 and 650 ft/lbs or just 250 ft/lbs
Hi, do u still have extra battery chargers?
Looks like the BMW's need that right angle impact
Hi Blake,
I enjoyed your tool reviews. I could use the battery charger since I’m planning on getting into m18s from m12s. Thanks.
I’m all out of the M18 chargers but I have a bunch of M12’s I’m trying to give away still.
@@BlakesGarage Thanks very much for the offer. I have a few m12 chargers myself. Keep up the good work. Cheers!
Hey, just wondering for the stubby, why do you step down to 3/8 with adaptor? any reason?
Yeah, cause it’s half inch and use a lot of three eights on it. I should buy a three eights version of it.
Why are these made in chyna?
So you only have to pay $450 and complain about it instead of paying 2k and never buying one.
Is the 2962 just the new version of the 2961?
Is there a big difference between the gen 1 and gen 2? Is it worth upgrading from gen 1 to gen 2? I recently got the gen 1 and I’d hate to shell out the cash if The difference is minimal
Basically size and LEDs.
Dunno if I can reach you here..I need a charger if you have any left
Sorry sent them all out already
I used th-cam.com/users/postUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K this for the first time today to replace the front wheel bearing on my rwd 98 dodge dakota. This had absolutely no issue removing or reinstalling the lug nuts and it took off the axle nut without any struggle. Sounds like it's got some muscle to it. Time will tell
Blake. so which would you recommend now that time has past the 3/8 or 1/2 mid torque
Probably 3/8 I tend to use it more but it’s all about your socket selection.
Thanks cause that was what I planning to pick up. Anywhere you recommend to grab a battery and charger?
@@prathammavong is just buy the kit. Or wait until Home Depot has a deal on batts
Let me have one of your m18 chargers Blake, I don’t have iG
This is on fair doing this got for the Engine hood If I were the owner of this junkyard I will cost you by doing this because you taking the chance from somebody else to buy this hood Unfortunately That’s not good because they trust you to take what ever part you want but keeping the other part as is it for somebody else to buy it again if I am the one who in charge you’re not allowed to come back to the same junkyard good luck trying to be fair
That hood was already damaged goods.
This was a cool vid ill be watching more
I want an "all around" impact, i have a high torque already, but dont know if i should get a stubby or a mid torque, the mid torque can do the same as the stubby and go higher, stubby is just lighter and smaller, any input?
Stubby is my go to for everything then if I need more torque I step it up.
@@BlakesGarage so if you need to run to the junkyard, and could only take one impact, it would be the stubby? Thanks for the reply!
@@malukojoexvi9957 Depends on the Task. I'd probably take the mid torque as it would get most anything off. But honestly I take 3 LOL
Better safe than sorry lol
Great video Thank you
i need a box
it is called pin detent.
Still need a compressor to air up your own tires at your leisure.
I got the Milwaukee M12 portable inflator things amazing
Lemme get one of those chargers 🔌
Shipped them all out months ago
I could use a charger mine isn’t charger
Damn! If I lived in the US i would asked you for one of those chargers, they are so expensive here in my country
If you pay shipping I could send you one
@@BlakesGarage really appreciated mate, cant thank you enough, but it turns out that according to fedex and ups, it is still more expensive for me to pay shipping than buying it here hahaha, I'll be patinent and wait for 'em to be on sale
I feel that I’ve sent some stuff to some places that are outrageous for shipping cost. I think the worst was Africa I sent something that was worth $20 and it cost $60 to send
@@BlakesGarage intersted in selling a charger or battery I have venmo and PayPal
@@stockton209ent I have a few M12's left DM me on IG @blakesgarage
I’m selling the m12 fuel 1/4 impact wrench set
Also the m18 fuel 1/2 mid torque impact wrench 2860-20
Heck yeah!
Hey dude, can I get one of those chargers please
Dead serious I’ll cash all you the shipping
Hit me up in the future I already sent them all away. If you see a video where I talk about it just DM me on Instagram @Blakesgarage
JUST IMAGINE THE PRICE DIFFERENCE IF IT WAS SNAPON, MAC...
I need a charger brother
I don’t have Instagram but need a charger
Bro i really need a charger can u plz send me one?
All gone
Can u used this to remove lug nuts on a suv?im new to tools
Oh yeah with ease. You can use it on a Semi Truck even.
Hell yeah. I use the 1/4 impact driver (2853) to remove lug nuts on my Sequoia and it has nowhere near the power as these. I will be getting one of these though so I don't rely on the 1/4.
Hey do you still have extra chargers?
Shipped them all out already.
i need a charger!!!!!!!!!!!!
I don't have Instagram and I don't know if you still have anything like bags or those boxes that those impacts cayman I just take out all the guts and use it as a tool Box send me a message or something if you interested of giving that away or selling it and no price I need some bags or something I am a beginner and a 20th have storage don't have tool boxes just bags and I'm working on it Thanks for the video
Hey "@blake's garage"Can I get the 1/2 inch box case if yah got an extra one that you don't need il give yah my mailing address if yah can it be much appreciated
send me one
The new 2960 3/8" and 2962 1/2" design is identical. The ONLY difference is the 1/2" anvil. Check out the Torque Test Channel, it'll blow your mind. th-cam.com/video/iqUCrwem2Lc/w-d-xo.html
I ended up sending my 1/2" Mil and 1/2" Sock back 2 days after I bought them after seeing the above video. I just received the 3/8" and am happier than a clam. Oh, why did I do this? Because the test results show the 3/8" wrench is get this, a full 1" shorter than the 1/2" due to socket size and get this, the 3/8 exceeds the Ball Busting 600 ft lb torque. Nobody knows why!!!
Confused. Are you referring the Gen 1 1/2" torque wrench? Is that the one you sent back?
@@Methodical2 2960 3/8" and 2962 1/2" are the most recent release designs. Since they're the same design differing in only anvil size, and the 3/8" give you over an 1" compact size due to socket sizes, I went with 3/8". So I sent the 2962 1/2" Anvil one back and the 1/2" socket set.
@@Methodical2 Yes, the 1/2".
@@cybco Got it. Much clearer now that you stated the 1" difference was due the socket size differences. That is not clear in your original statement. I thought you were talking about difference size between the old and new impact wrench.
@@Methodical2 My bad. It's a bad ass tool that's mind boggling powerful off of a battery. And it's not heavy. Enjoy it.
450$ is so much
bro i need a chargher help me please help me ive subed
👍😎👍😎😎✌️
No Stockton Pick-n-Pull I love stock and Pick-n-Pull Stockton sex be careful but Stockton Pick-n-Pull if you didn't know the first founding Pick-n-Pull ever also the best Pick-n-Pull parts freaking AMG there the other day e55 freaking Porsche Cayenne WRX is a lot of good cars come early come the whole day try to get a card if not bring your own card too much good stuff seriously I spend way too much money there not sponsored but if you want to sponsor me I wouldn't say no
This comment looks like one of those Facebook challenges where you just press the word suggestion in the keyboard and see what kind of sentence it spits out lol
Get That Mask Off.
Send me A charger please