How to Remove a Chainsaw Clutch Cover and Reset the Chain Brake
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Kevin shows you how to properly remove the clutch cover from a chainsaw and how to reset a chain brake.
Russo Power Equipment sells a wide variety of chainsaw parts. Check us out at www.russopower....
SUBSCRIBE AND NEVER MISS ANOTHER VIDEO!
bit.ly/13pxDd5
CONNECT WITH US!
Google+ ► bit.ly/14tfu0z
Facebook ► on. 12Eu3gs
Twitter ► bit.ly/11HWfU7
Instagram ► bit.ly/19DPyAe
THANKS FOR WATCHING!
Don't forget to "LIKE" and "SHARE" this video to pass along helpful information to your friends! Your feedback and inquiries are also welcome so let us hear what you have to say with a comment below.
Have to like a video that just states what you need to know.
Glad we could help!
Thanks. I was trying to change my chain and I removed the cover with the chain brake on. Your video showed me how to resolve the problem. Well done!
Same
Same, thanks Op for the video
Thank you for this. I couldn’t for the life of me figure out why the cover wouldn’t go back on.
Thanks a lot man! You helped me so much. You would help me even more if I would find your video two hours ago 😁.
Happy to help!
Thank you for posting! I have been struggling with putting cover back on; chain brake was engaged. See minute 2:15 to correct, for those seeking same info as me. Cheers all! :)
Yes indeed! Great video and explanation. Thank you
thank you John.
Thanks for the tip to disengage the chain brake with the cover off. For those following, make sure you apply good pressure as to not strip the plastic.
Perfect fit for my Echo CS-370, and the chain cuts very well th-cam.com/users/postUgkxBd8qUztQUCL8Rm1-aIig5ViBT2E_kO_6 . I had been using a Stihl chain that I had sharpened several times (sometimes at a shop, sometimes with my own electric chain sharpener), and there's no comparison -- the new chain cuts much better and holds its edge longer. We'll see how the new chain holds up when it needs sharpening, but for now I'm happy.
The best video out there on doing this. Thanks! That brake band was driving me crazy.
You saved me with the comment about the disengaging the chain lock. I had this same model for 10 years prior to getting this new one and never had that issue. Thanks
fantastic, just about to change the chain on my 135 series and after watching you it made me totally confident on what to expect, thanks once again
Clear and concise! Your chainsaw is so clean. Mine is covered in sap and sawdust from cutting spruce in the middle of summer.
your video on removing the clutch cover helped me learn how to reset the clutch plate and release it.something so simple but very helpful thank you very much.
This was so helpful I almost had to take it to the shop to get the cover back on. I took it off while the brake was engaged.
We be two peas in a pod.
@@bill605able 3 peas in a pod :-(
Four!
five!!
Number SIX here … and replied with perfect timing on a SIX year old comment 😆😆…
Awesome video. Wish I had watched this many years ago. A lot of things I’ve been doing wrong. Very concise and informative. Thanks
Thanks for posting, I left the brake on and thought it may cost me a small fortune to fix but managed to sort it after watching this video.
Thank you, after 30 minutes of trying by myself with no luck your video helped me fix it in two minutes! Clutch cover would not go back on...thx. again.
Brilliant, you just showed me how to disengage the chain brake to put the cover back on, I just bought this machine with the chain brake engaged with the cover off! Thank you, young man!
Thank you for this video, I have been sitting on my chain saw for 2 yrs as I couldn't figure out how to get the cover back on because it wouldn't fit. Disengaging the cluck is important information I didn't know about and the dealer never told me that.
The chain brake info just helped! Thanks. 😊
Thank you my brake was engaged and I wouldn't get the cover back on. You saved me some serious frustration. THANK YOU!
Thank you. Great help. Seriously no one else is explaining this stuff in their videos.
Thanks so much! You saved me a trip to the repair shop. I had the chain brake on after changing out chains and couldn't figure out why I couldn't get the cover back on. Your video help me solve my problem.
Life saver video. I didn't realize that the brake had to be reset like this. THANKS!
Happy to help!
Thank you so much just dislodged my chain and lined it up to the bar again and finally I was able to uncap the chain cap 🧢 !! Thanks 🙏🏻 no cap
Thanks, good tip on resetting the brake. I would just like to add that it is a good idea to lift up on the bar when you are snugging up the nuts.
Just saved me a trip to the repair shop. Thanks.
Thank you for showing this to me. I always have problem when to put the cover back and the break is so tight so I can't put it back together. This is very helpful.
Thanks for this instructional video. I didn’t recall settings the chain brake, and so didn’t think to try to unlock it. After watching this segment,
problem solved in about 2 minutes.
Cheers, Bill
i had the same experience. inadvertently had chain lock engaged. your video saved me a lot of grief and time. very good job. am grateful
Thank You, thank you, thank you. Great informative video. Just what I needed.
Thanks for posting this video that was really helpful can't believe it was that simple. Don't take the cover off with the brake engaged!
thanks, even though this is a six year old video, it helped to show me the proper way to get my chain brake reset, along with casting all my care upon the Lord who will guide us as He says, cast all your care upon Me for I care for you. Thanks for your part.
Magic ... now if I could just get it started... great job.
Thank you so much..... I was really struggling with this before watching your video. Pete
Great job man. You saved me a lot of time.
thank you so much for uploading this, saved my life!!
thanks for the video, well done and easy to follow. I am up and running, thanks again
You saved me a lot of money. Thankyou
Saved us! Thank you for helping us problem solve this issue.
IF only i read this beforehand - 50 mins later - thanks for the video - then 5 mins done
Thank you for making this video. I had difficulty as I didn't have my break in the correct position. You helped me put the cover back on and get the clutch properly disengaged. GZ
Thanks a lot. Very helpful. A fantastic instruction video.
You are brilliant thank you so much I have had this problem on my maculloch chainsaw watch your video and it worked like a dream first go I had spent four or five hours yesterday trying to resolve it. I didn't realise that the chain break went around the clutch I thought it went inside what an idiot but now I know how to do this it's brilliant again thank you so much for your easy to follow instruction, the principle is the same for any make of chainsaw you have gained one new subscriber
I'm watching this because I did that rookie mistake. Thanks for the video. Now I'm going out again to fell me some trees. Cheers
Thank you for this!
extremely helpful thanks so much!
This is such a well done video. Props
Thanks a ton. My chain break spring was locked back and i couldn't get the cover back on. It was driving me crazy.
Had the same problem so many other posters here did. "Instruction" manual is SO pathetic, almost worthless. I finally figured out how to make it work but could have saved a lot of aggravation by watching this video.
A great video, thanks.
Oh my goodness. thank you so much!!!! You just helped me fix my problem. I owe you a lunch or something. :)
Thank you! I new the answer was around here somewhere
Happy to help!
Thanks
Thank you very much! now I can back to work
Great video! Thank you!
great video, thank you so much for sharing this!
Thanks..was giving a chainsaw with this same problem..fixed in about 5 mins..runs perfect..great video!
This is slightly off topic, but i just bought a chainsaw and I was trying to tighten the chain. I was undoing the nut on side and turning the tension adjuster bolt but not disengaging the chain break. Will doing this cause damage?
good video 🤞
Yes, very helpful info.
excellent thank you
big thanks! I was stuck. not anymore!
Thank you so much I just did in it works
Thank you
Okay so I got a saw that was highly neglected and that chain clutch brake is stuck on the clutch like maybe it welded it’s self to it, how would I go about getting this apart with out breaking it?
much appreciated
Yes you have to disengage the chainbrake to take cover off what to do if chainbrake is engaged and won't disengage and cover won't come off do I force it off it's a olieo mac chainsaw
What size tool is needed to remove the bolts that hold the hand guard handle in place? Mine broke and I need to replace it.
What is the size of the screws holding the tension spring cover?
How can you remove clutch cover once the brake is applied?
I was an iddiot and didn't disengage the chain break before removing the clutch cover. Is there any way to get the cover back on? Thanks.
How do you change the saw blade on a 316E Husqvarna?
Both Husky and Stihl are fine saws. I like both. Now, any other brand, and we'd have to have a little talk.....
Stan Smith
How to tune a stihl carburetor plz.
How to change a chain on a Husqvarna 235e chain saw.
How can you temporarily put the clutch cover back on as you do at 2:40 when the clutch band is too small of a diameter (because it is engaged) to allow the clutch to fit in? I don't understand, but I sure wish I did!
Take the safety bar off with your hex drive and use the whole thing as a wrench to reset the safety!
Completely brain farted on how to do the chain brake.🤦🏻♂️ thanks!
Echo works to
this won't work on a 435 but if you search for the title "How to put your clutch cover back on your chainsaw AFTER the chainbrake got stuck" that will help!
So I did what it said not to in the video and removed it without disengaging the brake. Does anyone know how I can fix it now?
Manually push the metal back in the disengaged position and put the cover back on. I think ....
Hey, I know it's a year later but...Take the safety bar off with your hex driver and use it like a wrench to reset the safety. This is a much better technique and it only takes a minute.
🧐you did what the video said not to do…….. ok then, so we’ve established that you did, in fact, watch the videooo🤔…….
and now need to know how to fix it??
… hmm 🤔………….
……..
….
..JUST GO BACK AND WATCH THE PHUCKIN🤬 VIDEO AGAIN NIMROD 🙄🙄🙄
UGH! 😑…please…I just…. I REALLY hope that you’re trolling … I really really hope people are not this dim witted already…😓 It hurts my head to think about…if people like this are really out there….. not only buying but USING chainsaws!! I pray to God you don’t have a license …😣😖😣🤢
Had this problem on every Husky for decades. After countless hours of frustration and down time I now remove that useless god awful brake.
floral
Husqvarna sucks. Why isn’t this flaw pointed out in BIG RED LETTERS?!
1000 wat wat
Very helpful! Thank you very much😀
Thanks