Hallo, I've just changed the battery in my JBL pulse 1. I did it step by step as You did it in Your movie. My JBL works again. Thanks to You. Thank You very much and best regards from Poland.
YOU SAVED MY JBL SPEAKER!!! My JBL Pulse was acting funny (had it for over 5 years as well) and so I decided to buy the battery from Ebay and follow along your video. It’s back to normal 😭🙌🏽 Thank you!!! You’re a genius!!! 😭🙌🏽😁
i recently found out this was the speaker my cousin got me years ago! it didn't have any brand name on the box lol all it said was "Pulse" so few days ago i researched if there's specs on this and boom there it is, learning from your video thanks so much
Just a heads up, some pointers. TAKE LOTS OF PICTURES 1. You do not need to separate the rubber top from the circuit board, go deeper and pry out the circular circuit board (one with power button on it) 2. (Where I messed up) Be SUPER gentle with pulling the ribbon cable that goes from the interior to the top circuit board. I accidentally broke the little ribbon cable clip and never recovered from this. 3. You do not need to strip off the rubber face ( part with the battery level indicator and charging port). The unit will slide right out of the tube without removing the rubber face. 4. I'm thinking if you have a hot air gun or high powered drier you can probably warm up the circuit board glue on the top circular board and simply stick it back. 5. Before separating the two major plastic peices remember that theirs one tiny screw that joins the edges together. Even if you've done the top and bottom screws their's still one more right in the middle on the edge holding it together. Good luck! I failed but this is a great video and helped me a lot.
Hello i just change the battery of my pulse 1 after i replaced the battery and charge them everything seems fine there is no sound coming out. I watch ur video again and i figured it out i forgot to hook up the speaker hehe ill open it again tomorrow. Pls disregard mt question. Thx for videos
#icanread How is the battery life at 3000mah vs the original 4000mah? looks like 4000 is not available anymore curious how well the 3000 works, thanks, great vid and explaination
Bro hell no im doing it ill just buy a brand new. I replaced the battery to my jbl xtreme and its difficukt and pulse 2 and now it more complicated for the pulse 1. Ill just past. Thanks for the videos i aporeciate it!!
@@mygiguser i order a battery everytime i watch the video it make me challnge to attempt to replace the battery. I just order the battery from ebay. Once i received it ill try to attempt to open them up i already had idea if i break it oh well it will go to thrash 😂 ur video made ma challenge to do it. Thank u for giving us idea.
hey man I fixed the speaker thin cover but when i tried to put everything back together the antena disconnected and i just want to know if it is okay to connect the black or white cable-'???
for mine the upper part and bottom gets covered with some kinda of white dust when not used or kept in a shelf for long time. any idea what need to be done ?
Hey mygiguser , ive got a qeustion maybe you can answer it my jbl does make strange sound at maximum sound ..do you know if i have change the battery or is something wrong with my speakers itself?
Hey man I have a dead JBL Pulse that I beat to hell but I can't let go of the speaker for sentimental reasons, I hope you see this just so you can help me figure out what the issue is if the speaker is able to connect but gives a blinking red light, I have changed the battery multiple times on the device and opened it almost completely, but I'm afraid the red is water damage, please help out bro, not too many of these left 😅 (EDIT: The actual LED blink red when I connect my iPhone)
mine charges but the lights that indicate how much charge it has does not work do you know what i can do to fix that? maybe it is just a connection inside of it that got loose ? have you ran into that issue? or maybe it needs a reset. is there way to reset these ?
no, i haven't had that issue. Usually the battery is bad when those charge indicator lights don't work. But you may be right with the loose cable inside, that could be a problem too. I got a brand new battery once, where a cable wasn't soldered right by the battery manufacturer. Everything is possible nowadays.
@@mygiguser i actually just figured it out after taking it apart. i guess the cable that connects from those indicator lights all the way back to the board were cut and the only reason i see this happening is because it was bent and it curved around the main board and since i was probably always playing it full blast when i had got it back then it was slowly slicing apart. i did find it sliced but still needed a good 20% for it to completely rip off.. so now i know it works but it just does not show those indicator lights so i guess i just have to charge it and use it till it dies lol. unless i buy one of those cables and take it apart again and connect it. it is 10 prong maybe i will check them out on amazon later. Thanks for this vid! i was able to take it apart and put back together from your info.
Hallo, I've just changed the battery in my JBL pulse 1. I did it step by step as You did it in Your movie. My JBL works again. Thanks to You. Thank You very much and best regards from Poland.
Watching this video and reading the comments helped me successfully replace a failed battery in my Pulse 1. Thanks for taking the time to post this.
YOU SAVED MY JBL SPEAKER!!! My JBL Pulse was acting funny (had it for over 5 years as well) and so I decided to buy the battery from Ebay and follow along your video. It’s back to normal 😭🙌🏽 Thank you!!! You’re a genius!!! 😭🙌🏽😁
i recently found out this was the speaker my cousin got me years ago! it didn't have any brand name on the box lol all it said was "Pulse" so few days ago i researched if there's specs on this and boom there it is, learning from your video thanks so much
Thanks a lot for this video, it helped me a lot! Thank you!
Just a heads up, some pointers.
TAKE LOTS OF PICTURES
1. You do not need to separate the rubber top from the circuit board, go deeper and pry out the circular circuit board (one with power button on it)
2. (Where I messed up) Be SUPER gentle with pulling the ribbon cable that goes from the interior to the top circuit board. I accidentally broke the little ribbon cable clip and never recovered from this.
3. You do not need to strip off the rubber face ( part with the battery level indicator and charging port). The unit will slide right out of the tube without removing the rubber face.
4. I'm thinking if you have a hot air gun or high powered drier you can probably warm up the circuit board glue on the top circular board and simply stick it back.
5. Before separating the two major plastic peices remember that theirs one tiny screw that joins the edges together. Even if you've done the top and bottom screws their's still one more right in the middle on the edge holding it together.
Good luck! I failed but this is a great video and helped me a lot.
Thank you，i made my jbl live again
I see from the video i will be trying this my self.
Hello i just change the battery of my pulse 1 after i replaced the battery and charge them everything seems fine there is no sound coming out. I watch ur video again and i figured it out i forgot to hook up the speaker hehe ill open it again tomorrow. Pls disregard mt question. Thx for videos
#icanread How is the battery life at 3000mah vs the original 4000mah? looks like 4000 is not available anymore curious how well the 3000 works, thanks, great vid and explaination
It's good
Hi, I replaced it with the same battery. But even if I charge it after changing it, the battery light doesn't respond. Is there a reason?
Bro hell no im doing it ill just buy a brand new. I replaced the battery to my jbl xtreme and its difficukt and pulse 2 and now it more complicated for the pulse 1. Ill just past. Thanks for the videos i aporeciate it!!
sell it on ebay!
@@mygiguser i order a battery everytime i watch the video it make me challnge to attempt to replace the battery. I just order the battery from ebay. Once i received it ill try to attempt to open them up i already had idea if i break it oh well it will go to thrash 😂 ur video made ma challenge to do it. Thank u for giving us idea.
hey man I fixed the speaker thin cover but when i tried to put everything back together the antena disconnected and i just want to know if it is okay to connect the black or white cable-'???
Thank you.
for mine the upper part and bottom gets covered with some kinda of white dust when not used or kept in a shelf for long time. any idea what need to be done ?
Nice breakdown shown here 😁
#icanread
Glad you liked it!
I am going to do this. I have lost the charger. how big of a charger do I need to charge the Pulse? What would be a good one to buy?
2 or 3A charger should do the trick.
Nice bro, do they even sell JBL pulse 1 battery's?
Tech Studio oh yes, i got this one on Ebay.
Hey mygiguser ,
ive got a qeustion maybe you can answer it
my jbl does make strange sound at maximum sound ..do you know if i have change the battery or is something wrong with my speakers itself?
most of the time it is just the battery
@@mygiguser mine at full sound after 2 or 3 hours it stop workig and i have to recharge again .. i will buy the battery soon thank you
감사합니다.😄
Hey man I have a dead JBL Pulse that I beat to hell but I can't let go of the speaker for sentimental reasons, I hope you see this just so you can help me figure out what the issue is if the speaker is able to connect but gives a blinking red light, I have changed the battery multiple times on the device and opened it almost completely, but I'm afraid the red is water damage, please help out bro, not too many of these left 😅 (EDIT: The actual LED blink red when I connect my iPhone)
Hector Gomez i have no idea what that blinking red is.
mygiguser Honestly man it would be a lot more simple to record a video on it and see if anyone could help
Nice
Hello , you think its possible to put 2 parallel 18650 akkus?
no, that does not fit
Hay how to shop JBL PLUS button board
idk, i would try Ebay
This is the way NOT to take it apart! Wow!
It looks like a flip 2 with lights around it 😂
🤒🤒🤒
Gluuuuuue
Wtf
Onde encontro esta bateria?
mine charges but the lights that indicate how much charge it has does not work do you know what i can do to fix that? maybe it is just a connection inside of it that got loose ? have you ran into that issue? or maybe it needs a reset. is there way to reset these ?
no, i haven't had that issue. Usually the battery is bad when those charge indicator lights don't work. But you may be right with the loose cable inside, that could be a problem too. I got a brand new battery once, where a cable wasn't soldered right by the battery manufacturer. Everything is possible nowadays.
@@mygiguser i actually just figured it out after taking it apart. i guess the cable that connects from those indicator lights all the way back to the board were cut and the only reason i see this happening is because it was bent and it curved around the main board and since i was probably always playing it full blast when i had got it back then it was slowly slicing apart. i did find it sliced but still needed a good 20% for it to completely rip off.. so now i know it works but it just does not show those indicator lights so i guess i just have to charge it and use it till it dies lol. unless i buy one of those cables and take it apart again and connect it. it is 10 prong maybe i will check them out on amazon later. Thanks for this vid! i was able to take it apart and put back together from your info.
Thank you